Question about 1993 Isuzu Rodeo

1 Answer

The ligth of check trans is on.sometimes¿? - 1993 Isuzu Rodeo

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

With the engine at operating temp, check your fluid. If there is no dipstick (as there may not be) by new fluid, drain the old fluid and put new fluid in until it begins to flow out. Quickly put the fill plug back in. Purchase or borrow a repair manual to locate the correct plugs for this if there are more than two. Certain ones are used on some transmission to hold gear housings and such together in the transmission.

Also, make sure any vacuum lines are secure and in good repair. Replace any that are quetionable. If theyr'e dirty (probably are, clean them with a rag and make sure they have no holes or cracks in them.) it may be hard to see if they're bad or not.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

Posted on Aug 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the brake ligths?


Did you check to see if there is a fuse on the brake lights circuit?

If you changed the lamps and the brake switch it is obvious that they are not being energized.

Aug 31, 2015 | Cars & Trucks

1 Answer

When i put my honda in drive it wont go into the gear and the drive ligth stay on when i put 9into park


could be servos inside the transmission or a plate inside the transmission. I would call a trans specialist and explain the problem

Jun 11, 2010 | 1998 Honda Accord

1 Answer

O.k i try to fix my jeep i check the engine ligth i ready change all the sensors what the engine ligth say aand still the same went i running just turn off


You knowed what code are there? Read the Check Engine Codes

If you change the sensors, Reset the ECU, sometimes they keep stored in the mmeory.

Hope this help; good luck (remember rated this help).

May 11, 2010 | 2002 Jeep Grand Cherokee

1 Answer

Service engine soon stay on the ligth?


Service engine soon is telling you to check computer for trouble codes. You can sometimes disconnect battery for 10 seconds and codes will erase. It is a good idea to have them checked. Most Auto stores like Autozone will check for free. You may have to call around. Most repair shops will charge $40 to check.

Mar 18, 2010 | 2001 Oldsmobile Alero

2 Answers

We have a problem with the over drive. ligth blinkns O/D at the shift


Try checking the transmisson fluid level if it is low this could cause the problem you are describing, any slight loss of transmiion fluid can cause the transmisson shift to shift incorrectly.

Mar 09, 2010 | 1999 Ford F150 Regular Cab

1 Answer

I have check engine ligth on the code is P0560¿what is the solution?I changed the alternator and them light go on.


P0560 System Voltage Malfunction
Check battery (load test) as well as all connections, cables
and wiring for cleanliness, tightness, etc.

Also, check charging system (including alternator output...it's possible you got a defective alternator).

Oct 11, 2009 | 2004 Kia Optima

1 Answer

My 1992 Trans Sport starts then shuts off right away


fuel problem somewhere along the line¿¿¿ but where ,i would remove the tank sender unit and check the pump and pump flexible connection first

Aug 14, 2009 | 1992 Pontiac Trans Sport

2 Answers

Transmition problem


sounds like a burned clutch to me
tran fluid should be pink and lite
touch the stick and feel if fluid has metal or brownish particles.if so Not a good thing for you

Apr 21, 2009 | 2001 Honda Odyssey

1 Answer

2000 jetta auto trans won't shift out of park after starting


that is a TSB you may have a bad valve body, olso this condition may turn malfunction ligth on, or if you remove the air intake pipe
on trans there is a conector that go to trans valve body some time come lose pluged back an reset PCM if don't fixed will be the trans valve body

Mar 12, 2009 | 2000 Volkswagen Jetta TDI

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...