Question about 2000 Ford F350 Super Duty Super Cab

1 Answer

Ford f350 i changed belt tensener assembly and idler pully only to have it start pulsation in the brake pedal and steering wheel when turning right and left it does this in park and while driving but only when im slowing down. it didnt' do this before i changed everything. and yes the belt in put back on right i triple checked it. im thinking i must have had a weak power steering pump it does have a hydorpump that runs off the ps it not stiff and it doesn't mash to the floor so im thinking it not that it has to be ps pump what do you guys think?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

So is the Power Steering fluid level OK? did you drive it at all with the belt off? If so there is air in the system and it may work its way out. Or at the most have a Vacuum pump connected to the reservoir and the air evacuated out of the system.

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brakes are pulsating in pedal. we've changed calipers, turned drums and rotors, replaced pads, bled brake lines. what could be causing the pulsating and egg out feeling.


Your rear drums are out of round (warped). Eventhough you turned them the problem will not go away because they have hot spots in them that turning can't remove. You need to replace them with new ones to solve this problem. Pulsing pedal is rear brakes and a shimmy in the steering wheel while braking is in the front brakes.. Good luck I hope this helps you out.

Jul 14, 2011 | 2004 Saturn VUE

1 Answer

Ford 2006 freestar sel, violent brake pedal pulsation in steering wheel when braking, replaced calipers, pads and rotors


The job either wasn't done correctly or somehow the Wheel Sensor Harness, got involved in a way it shouldn't have.

Sep 27, 2010 | Ford Freestar Cars & Trucks

1 Answer

Do you have a way to find the route for a 1993 Ford Escort Serpentine Belt?


FOR A 1.9L ENGINE. CANT SEND PIC, START BY PUTTING BELT OVER ALTERNATOR PULLY,THEN TO THE RIGHT OF POWER STEERING PUMP PULLY FROM THERE TO THE LEFT SIDE OF THE IDLER PULLY , THEN UNDER THE A/C COMPR PULLY AND UNDER THE CRANK PULLY RELEASE TENSION ON TENSIONER BELT GOS UNDER TENSIONER.

Nov 04, 2009 | 1993 Ford Escort 4 Door

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

1 Answer

Engine starts but schreeches and belt won't move. fird f150 1996


If the belt won't move, the schreech is probably coming from the crank pully. Take the belt off and see what pully will not move by turning them by hand. Either the altenator, power steering, A/C compessor, Tensioner, or idler pully is frozen up. you should be able to turn all of them by hand. Replace which ever one doesnot move.

Mar 27, 2009 | 1996 Ford F150 Regular Cab

1 Answer

Surpentine belt.


depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the crank...it goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

1 Answer

1992 Ford F350 Dually Diesel Truck Brake System problem.


Adjust your rear brake shoes. Then rebleed the system. Start at the master cylinder Bleed master first then the wheel furthest away from the master (right rear then left rear then right front then left front. Do that and your pedal should be good.

Nov 28, 2008 | 1992 Ford F350

3 Answers

2004 f350 power steering problem. when the truck is in gear with your foot on the brake you cant turn the wheels. the power steering pump has been replaced and the fluid changed with no result.


2006 f350 crew 4x4. Replaced p/s pump,booster,put gauges to check pressure? Fluid clean, lifted in air to check steering linkage and turning without load. Still baffled ! I work at a Ford dealer and mechanics said its normal. Thats BS! I replaced the p/s pump so im guessing the screen was new with the pump. I will check for the hell of it. I have a feeling it is suspension under load. The symptom on this truck is not turning when brake applied. Also hard turning when vehicle is on and in park,wont turn.

Aug 14, 2008 | Ford F-350 Cars & Trucks

Not finding what you are looking for?
2000 Ford F350 Super Duty Super Cab Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...