Question about 2008 GMC Sierra 1500

Open Question

How do I replace the right side mirror on a 2008 GMC Sierra pick up? I have the replacement but I'm having difficulty removing the cracked one.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

raffaiel
  • 209 Answers

SOURCE: Loose side mirror. Need to tighten it up.

just remove the panel inside at the side of the mirror, then you will find the bolts.

Posted on Apr 25, 2009

  • 1 Answer

SOURCE: My GMC sierra side mirror is loose on from the

I just spent about 2 hours trying to resolve the same problem, and discovered that there doesn't appear to be any way to repair the mirror without purchasing a whole new one. There a 3 screws you can access by slanting the mirror to the extemes in both the up or down positions. Once they are removed I discovered a 4th screw (once I broke the plastic pieces surrounding the mirror appart) that there is a 4th screw that is impossible to reach without removing the actual mirror part. In any case I discovered that the reason that the mirror was floppy is because there was a funny looking nut that is supposed to lock in the spring mechanism that was completely stipped and non functional. Better luck than me!

Posted on Jan 03, 2010

  • 1214 Answers

SOURCE: need to replace passenger side view mirror 200 GMC Jimmy Diamond

On my '97, there was a triangular shaped piece of plastic on the inside trim that had to be removed. I think all three mounting screws were under that. It's been a few years, but I think that was how it was done.
I remember it was pretty easy though.

Posted on Jan 29, 2009

  • 2 Answers

SOURCE: 2003 Sierra rearview mirror

replace outside sensor

Posted on Feb 28, 2009

  • 1986 Answers

SOURCE: how do you remove the door panels from a 2001 GMC

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect any other wiring that may be attached to the door.

Posted on Nov 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 gmc sierra 1500 left headlight out. replaced bulb twice but still out. right side and both high beams work fine


Check for power at the socket. If you have power there bulb is not making good contact.

Nov 30, 2013 | 2008 GMC Sierra 2500HD 2WD

1 Answer

How do i replace a turbo in a 2008 Sierra GMC


you need a chilton or GM repair manual.read through the turbocharger removal procedure.removing turbo with out repair manual is hard because you have to remove many things to remove turbocharger.

Jan 15, 2013 | 2008 GMC Sierra 1500

1 Answer

Where is the transfer case control module on 98 gmc sierra


It is located under the passenger side kick panel. Remove the plastic kick panel cover to reveal the TCCM.

Nov 02, 2012 | 1998 GMC Sierra

1 Answer

HOW TO REPLACE THE LOWER MIRROR ON 2009 GMC K-10. I HAVE PART # 15933020 GM.


the lower spot morror has a one T-15 torx screw right in the center. if your mirror is only cracked you have to brake the center of the spot mirror out to get to the T-15 torx screw behind the mirror glass. then replace with the new black PVC mirror glass (backing-holder) from the kit BEFORE STICKING ON the new mirror.
Hope this helps, goor luck.

Feb 02, 2010 | 2007 GMC Sierra C/K2500

1 Answer

2004 GMC Sierra 2500 HD. Drivers side mirror was


You should be able to replace the glass, but I believe it is glued in place. You should be able to tell as you remove the old pieces. It is a special white glue.
I was able to get a great price for the whole mirror on ebay. even the ones with signals and heated.

Hope this helps

Jan 09, 2010 | 2008 GMC Sierra 2500HD 2WD

1 Answer

2000 GMC Sierra Power mirrors do not work


sounds like a switch as common error oboth sides unlikely

Dec 31, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

2003 GMC sierra side view mirror glass replacement


That dependso on if the housing itself is broken then yes. If the face plate that is attached to the mirror itself is flapping around then maybe. If it is just the mirror, just go to your neighborhood auto glass shop and but a "Ready-Cut" mirror for a small amount of money. they come already cut to fit perfectly. As for removing the old glass, take a very small flat screw driver and pry the glass away from the face plate. Once completely cleaned out use the adhesive from the ready cut and place them on the face plate. Next press the new mirror onto the flace pate, being careful not to press to hard or it will snap it in half.

Jun 03, 2009 | 2003 GMC Sierra 1500

1 Answer

Need to replace passenger side view mirror 200 GMC Jimmy Diamond


On my '97, there was a triangular shaped piece of plastic on the inside trim that had to be removed. I think all three mounting screws were under that. It's been a few years, but I think that was how it was done.
I remember it was pretty easy though.

Jan 29, 2009 | 2000 GMC Jimmy

1 Answer

How to replace side mirror on 1996 GMC Sierra?


See Figure 2
0900c1528008f812.jpgFig. 2: Outside mirror-below eyeline type
  1. Remove the mirror cover screw and lift the cover and pivot the mirror towards the window.
  2. Remove the mirror to door bolts and remove the mirror and seal from the door.
  3. To install, position the mirror and seal to the door and install the retaining bolts.
  4. Pivot the mirror away from the window, and lower the mirror cover.
  5. Installation is the reverse of removal.
  Hope this helps .. if not feel free to contact me

Nov 11, 2008 | 1999 GMC Sierra

Not finding what you are looking for?
2008 GMC Sierra 1500 Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...