Question about 1988 Dodge Shadow
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1.Start by changing plugs and wires. 2.Check for vacuum leaks. With the engine running, wigglr every hose you can see, to make sure nothing is loose or cracked. 3.Change fuel filter. 4.Check timing. 5.Check air control valve. 6.Check idle control sensor.
Posted on Jun 19, 2009
you have a bad connection somewhere in vehicle engine side, very hard to determine until test drive vehicle with scanner and inspect voltage when it is happening, tell me does the check engine light comes on
Posted on Nov 17, 2009
SOURCE: 1989 cutlass ciera 3.3L, when
Hi and welcome to FixYa!
As a first course of action, I strongly suggest that you check the vacuum lines. If you have a worn out or disconnected vacuum lines these issues can occur. I'm suspecting the MAF sensor too. Before proceeding on replacement, please remove the throttle body and clean it with a carburetor cleaner till it's clear of carbon. Carbon deposits can make irregularities on the air flow.
If the problem still persists then go with the MAF sensor replacement. Hopefully, cleaning the throttle body resolves the problem to cut the cost.
Hope this helps and thank you for using FixYa! Have a good one!
Posted on Mar 25, 2011
Tips for a great answer:
Oct 24, 2013 | 1993 Dodge Dakota
Jun 27, 2011 | 2001 Dodge Ram 1500 Truck 2WD
Apr 18, 2011 | 1988 Chevrolet C1500
Aug 05, 2010 | 1988 Dodge Shadow
Jan 25, 2010 | 1988 Mercury Grand Marquis
Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Aug 08, 2008 | 1998 Dodge Dakota
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: