Question about 2004 Jaguar XJ-Series

Open Question

How do you replace the trunk release motor on a 2004 Jaguar XJ8?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2920 Answers

SOURCE: 2004 xj8 jaguar a/c fan

there is a relay on the firewall for that but check the fuses first to make sure its not blown...if its not blown you can run a jumper wire to test the motor itself to see if it works or not.

Posted on Aug 10, 2008

Ad
jrod1125420
  • 161 Answers

SOURCE: 2004 Jaguar XJ8 AC

first i would try checking relays,fuses, and the ground cables. replace as neccesary....now for checking the ground cables.....i would disconnect them and try scuffing them up with a wirebrush or something that will scuff up the metal a little bit then re-attach them.....test the blower and see if it works.....let me know what happened.

Posted on Sep 30, 2008

  • 1 Answer

SOURCE: location of fuse for trunk release

look in the owner's manual - the fuses are by the drivers pedals in the console. there's a chart in the manual of which fuses operate what; then when you take the fuse panel cover off it shows which fuse is where.

Posted on May 02, 2009

mrgreenz
  • 962 Answers

SOURCE: AC BLOWER NOT BLOWING

The resistor that controls the blower motor. it is a small gadget that has a 2 or 3 wire plug . Replacing the resistor should fix your problem. It is on or near the blower motor. Under the dash. Not easy to remove . But it can be. Please give thumbs up if helped.

Posted on Jan 21, 2010

pugwash814
  • 377 Answers

SOURCE: My 2004 Jaguar xj8 will not release both latches

If your bonnet will not release, there is a rubber plug inside fender located up in
the wheel well under the latch. Remove the plug, stick a screwdriver up and pry the latch
back. The hood / bonnet will open.

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xj8 trunk won't open


the normal prob is caused by the wiring around rh trunk hinge broken removing supply to release motor. you have a manual key slot in rh of trunk lid think its in either of the trunk badges or the plinth this siezes up because everyone uses the remote or dash switch but when the wiring fails you cant use the key slot try spraying plenty of relase fluid in the slot say wd40 and gently keep trying to free it off that has allways worked for me when you get in remove the plastic rh trunk hinge cover and repair fractured wiring good luck

Jan 31, 2017 | Jaguar XJ8 Cars & Trucks

1 Answer

I was changing a fuel pump in my 01 xj8 and had to disconnect eletric wires now thati closed trunk cant get it open have electricity but must of disconnected wire for trunk lock now the key wont open it...


If the key won;'t work, your only other solution is to remove the rear seats. You may be able to reach through the rear seat bulkhead and pull the release catch.

Aug 18, 2014 | 2001 Jaguar XJ8

2 Answers

What options do I have in gaining access to the trunk of my 2004 jaguar xj8 that has gone into valet lockout


all back seats are either screwed down or hooked in. you need to use a little muscle and lift up your back seat to see which is which. there is no other way to gain entry to your trunk.Trust me Ive locked my keys in my trunk too. Now i have a hidden spare to my door and trunk. GOOD LUCK

Aug 15, 2014 | 2004 Jaguar XJ

2 Answers

How do I access trunk entry into my 2004 Jaguar xj8 when now it has gone into valet lockout?


I believe that this is to protect valuables left in the boot when parking the vehicle. I read here that there is access some where in/ near the glove box but I cannot remember exactly what it was . Surf the net under Jaguar valet problems and you may get the answer.

Aug 15, 2014 | Jaguar XJ8 Cars & Trucks

1 Answer

How do I access the trunk of my 2004 jaguar xj8 when it's gone into valet lockout?


You can use the key on the trunk the key aperture is at the right side of the trunk. Hopefully it is not seized from lack of use. As you turn the key try thumping the boot above the top of the back edge with your hand not too hard and also rocking the car by the boot

Aug 15, 2014 | 2004 Jaguar XJ

1 Answer

2004 xj8 jaguar open glovebox


I assume the car is in valet mode,,,,just take your master key and open the trunk with it by inserting the key anc turning it one time...This will deactivate the valet mode...Let me know. ..

Aug 18, 2011 | Jaguar XJ8 Cars & Trucks

1 Answer

My 2004 Jaguar xj8 will not release both latches with the inside release. How can I get to the latch without the hood opening?


If your bonnet will not release, there is a rubber plug inside fender located up in
the wheel well under the latch. Remove the plug, stick a screwdriver up and pry the latch
back. The hood / bonnet will open.

Feb 27, 2010 | 2004 Jaguar XJ-Series

Not finding what you are looking for?
2004 Jaguar XJ-Series Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...