Question about 2007 Mazda B3000

Open Question

2001 mazda B3000 3.0L v6 2WD pick up whjere do I jack up the front end

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How easy is it to damage the front grill-work of the Mazda6?


Depends. Really cold out, these will crack easily. I was rear ended, by a Porsche. Cracked my bumper, we were picking pieces of his off the ground. We were stopped, he couldn't have been doing more than 5 MPH. Frigid that day.

Feb 21, 2016 | 2016 Mazda Mazda6

1 Answer

Stering turing noise


have you checked the power steering fluid level ? may just need topping up other wise will need to jack up the front end take off front wheels , get some one to turn wheel from left to right and back and look and listen to see if you can locate the area of noise , make sure the vehicle is supported on stands and not just the jack , it could also be coming from the power steering pump so have a listen there as well , so long as there's no leaks and the steering operates ok it may just be one of those noises a 14 year old car will pick up over time

Jul 18, 2014 | 2000 Mazda Protege

1 Answer

Knocking sound drivers side front during exceleration


Have the CV joints checked on the front axle shaft ends. When they wear out they knock on acceleration.

Mar 21, 2014 | 2001 Mazda 626

1 Answer

Solid bar in front end, two bushings on either side of front tires is this the sway bar?


if you are talking about the sway bar end links. you can replace them yourself to save a few bucks. first Raise the front of the vehicle with a hydraulic jack. Place jack stands under the frame on each side of the vehicle. Lower the hydraulic jack so that the weight of the vehicle is supported by the jack stands and the front wheels are off the ground. locate the sway bar end links on either side of the front sway bar. Remove the bolts from each end of the sway bar end link. replace the bushings in the same order you take them off. you can go to any auto parts store and buy end links for your car.

May 04, 2012 | 2001 Chrysler PT Cruiser

1 Answer

How do i fix front right ball joint for 2001 mazda protege lx?


SAFELY RAISE SUPPORT FRONT OF VECHICLE ON JACK STAND MAKE SURE VECHICLE PARKED ON SOLID LEVEL GROUND. REMOVE WHEEL OR TIRE. REMOVE BALL JOINT STUD PINCH BOLT AND NUT FROM THE STEERING KNUCKLE.REMOVE BALL JOINT BY PRYING IT FROM THE KNUCKLE.REMOVE BALL JOINT TO LOWER CONTROL ARM BOLT AND NUT. INSTALL NEW BALL JOINT TO LOWER CONTROL ARM.TORQUE THE BOLT TO 86 FT LBS INSTALL BALL JOINT TO THE STEERING KNUCKLE TORQUE BOLT TO 43 FT LBS YOU MORE LIKELY NEED FRONT END REALIGNMENT AFTER THE JOB DONE.

Sep 09, 2011 | Mazda Protege Cars & Trucks

1 Answer

I have a mazda 626 2000 4 cyl. auto. My shifter moves to every position but my transmission always stays in park physically. Can you suggest what to look at. Thank you Peter.


the shifter linkage under the car has come lose i think ....u will have to jack the car up and put on jack stand ...so u can see while u have someone move the stick so u can tell which end is lose....hope this helps......

Nov 22, 2010 | 2001 Mazda 626

1 Answer

How to properly remove lower ball joint on a 1998 mazda b3000 4x4 with torsion bars


Jack up the car as normal remove the wheel put another jack under the wishbone jack it up until you relieve the tension on the balljoint. If the nut on the end of the balljoint is looking up remove the balljoint screws and nut if the nut is looking down then you may have to remove the front drive in order get the balljoint out.

Aug 05, 2009 | Mazda B3000 Cars & Trucks

1 Answer

Mazda tribute firing order. I have miss fire in the # 5 but I dont have the order.


You didn't post your engine size so please pick the applicable diagram:

2001 Mazda Tribute DX 2WD
3.0 liter DOHC V-6

27a11e1.gif

2001 Mazda Tribute DX 4WD
2.0 liter DOHC L4

f205155.gif
2wd or 4wd...it is still the same for the V6.

Jul 14, 2009 | 2001 Mazda MPV

1 Answer

2001 auto Mazda protege kicking/jumping when shifting


Im not too sure but it may be that your transmission mount may be broken. Other than that I wouldnt be able to help you.
Hope this helps.

Apr 03, 2009 | 2001 Mazda Protege

1 Answer

Replace front shocks 2001 dakota


Yes! and use Jack Stands.
Put Jack stands under truck frame, not under wheel or lower A-frame.

Oct 28, 2008 | 2001 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...