Question about 2005 Kia Sedona
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: location of Charcol Canister and
The evaporative emission canister purge solenoid valve is a duty control type, which controls the flow of purge air from the evaporative emission canister.
Inspection 1. Look for loose connections, sharp bends or damage to the fuel vapor lines. 2. Look for distortion, cracks or fuel leakage. 3. After removing the EVAP canister, inspect for cracks or damage.
Posted on Sep 04, 2008
you should be able to fix it look for a can near the fuel tank that has vacuum hoses coming out of it and you should be able to just buy the bad solenoid
Posted on Nov 03, 2008
Although I recommend you buy a Haynes service manual for your Dodge, I think you will find the canister attached to the firewall or one of the fender wells.
Most of them look a lot like an overgrown spam can and it will have two connections on it.
Posted on Mar 06, 2009
You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Posted on Mar 19, 2009
SOURCE: "Check Engine light"
The issue is that the system randomly checks the loop of the fuel system to confirm that it has no leaks. A missing cap is the easy one to correct. It might also be a slpit in the rubber hose that connects the fuel fill tube (on the chassis) to the one on the tank, or any other hose in the the entire fuel delivery/ fume recovery sysrtem. The solenoid that allows the engine's vacuum to be used to conduct this test can also be sticking so that after the test cycle, it doesn't reclose. Good luck
Posted on Dec 10, 2009
Tips for a great answer:
EVAP Canister Vent Valve Malfunction (Closed)
EVAP canister vent control valve is damaged or has failed.EVAP canister vent control valve rubber tube is blocked.EVAP control system pressure sensor is damaged or has failed.EVAP water separator is damaged or has failed.EVAP canister is saturated with water.Click here to see the suspected parts to check out.
Jan 29, 2013 | 2005 Nissan X-Trail 2.5i
Feb 20, 2018 | 1997 Ford Thunderbird LX
Jun 13, 2012 | Cars & Trucks
Jun 08, 2012 | 1998 Nissan Frontier
Apr 27, 2011 | Mercury Cougar Cars & Trucks
Jan 18, 2011 | Ford Escort Cars & Trucks
Apr 21, 2010 | 2000 GMC Jimmy
Jul 02, 2009 | 2000 Ford Taurus
Jun 29, 2008 | 1996 Mercury Cougar XR7
884 people viewed this question
Usually answered in minutes!