Question about 2003 GMC Envoy

1 Answer

The tiny clip on the orange wire broke on the panel that makes the window go up and down, i tried to connect the orange wire back and window does not go up or move period

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

It may have gotten hot and broke the connector. Check the fuse in the fuse box for the windows power. The owners manual will give the location for this. If it blew the fuse, you can change it. If it continues to blow the fuse, you will have to troubleshoot for a short.

Posted on Aug 30, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006. Wires disconnected from underhood fuse box panel. How do I determine which wire connects where?

Not quite sure what you mean, did you break a wire harness loom that keeps all the wires bundled together or did you break an actual plug connector?
If you broke a loom clip them use black electrical tape to wrap the wires back together. If you broke a plug, go to the dealer and buy the new plug or harness. the new plug will have mew wires already attached and all you'll have to do is match color, cut, splice, solder, heat shrink and plug back in.
If you have another problem for some reason or another that I haven't hit on then I'd suggest going to your local parts stor or dealership and buy the repair manual for your car, turn to the electricl schematic section and follow your color codes from there..
Good Luck

Jul 13, 2015 | Nissan Quest Cars & Trucks

2 Answers

2001 pontiac montana driver side window went down fine but will not come back up. is there anyway to get it back up if i need something new?

Thanks for using FixYa and welcome to the site. Since the window is not coming back up, it is either off track or the track bar is broke. In order to find out, you will need to take off the door panel. There should be a few screws on the side of the panel that needs to come out. There may be foam or plastic in the door that also needs to come out. You have a little bar that the window sits on. It raises the window. Make sure the bar is there and make sure the window is sitting on the bar. If the bar is broke, it will need replaced. If not, just sit the window on the bar and it should go back up. If you have any questions, feel free to ask and thanks for choosing FixYa.

Apr 10, 2011 | 2000 Pontiac Montana

2 Answers

The passenger side window, something broke down in the door, the motor for the power windows still works, but there is nothing holding the window up? What broke? Is it a do it yourself job to fix it?

Its the window regulator thats broke. Most are made with plastic brackets and cable. The plastic breaks and the cable goes nuts then nothing is holding the window. You need to get a regulator, if you can take the door panel off you should be able to handle installing the window regulator.

Dec 08, 2010 | 2002 Buick Rendezvous

1 Answer

We have a 1994 Grand Prix the driver door won't open and not worth putting alot of money into, is there a way we do it ourselves and fix it so it's stays open? We don't care if we can't lock it anymore,...

try to get door panel loose it sucks with seat in way but it can be done and its possible plastic clip or handle broke . if the window goes down you can also hook the release with a wire through the window gap at back end of door and open door the take off panel and replace rod or clip

Nov 08, 2010 | 1994 Pontiac Grand Prix

1 Answer

I have a 2000 Dodge Grand Caravan. The passenger side front window goes down but will not go back up.

almost all the time it's the switch. The passenger side has two switches will the window go up with the switch on the passenger door? If it does it might not go down with the passenger door switch. Down with the master and up with the passenger switch is common. If it works like this both switches are good and you have a brocken wire. The wire can be found with a test light hooked to ground and then hooked to power. It requires that both switches be popoed up out of the door panel. ( pry up at the rear of the switch, then it pulls reaward and up) With both switches up look to see which wires are the same color. put the test lights point into the back of the plug right next to the wire. with the key on work the switch. it will light in one direction. go to that same colored wire in the other switch plug and work the switch the same way. If the light comes on the same its good. then check the other wire. the wire that doesn't work is broke. I'll even tell you where it's broke at!? Right inside the boot in the drivers side door hindge area. Unhook the boot and pusit back till you can see the wires ( theres a bunch and find the one thats the same color) pull on it and it'll come free as it's broke find both ends and connect them ( Oh thats right it'll break again for the same reason it broke the first time ) So add a peice of wire ( Hopefully the same color but it's not required) make the connections and then get in the kick panel and find the wire and pull the repair though then with the door panel out of the way pull ithought there too and you have a new wire where it bends and it'll stay fixed for awhile

Jul 03, 2010 | 2000 Dodge Grand Caravan

3 Answers

2003 chevy s10 blazer back hatch wont open

This is how to replace it on a 1996 Blazer 4dr.

First, go buy the part you need at Rockauto. The link is for a 1996, but make sure you order it for your vehicle. Just do a search for a Window Actuator Rod Retainer. Rock Auto requires you order a pair of these, so make sure you order two. Each one has two of them in there so you will have 3 extras.
Window Actuator Rod Retainers -

To open the window in the mean time while you are waiting for the part, do the following.
1. Remove the two screws on the door handle so you can pull back the door panel.
2. Pull back panel on top in the middle where it rises.
3. Reach in with a screw driver or your fingers to push down the lever. It's a metal piece on the left side against the wall to the inside of the blazer.
4. Open window and tailgate and remove screws on the sides of the tailgate. There is one on each side. Make sure it is the one fartest out and on the plastic panel.
5. Once the screws are removed, pull up on half the panel that is farthest out from the truck. Slide out away from the truck. The panel should come off with a little effort. Do not pull up on the panel closest to the truck, you will break the hooks that hold it in. I broke two on mine. The panel will slide away from the truck pretty easily.
6. Remove the screws holding the middle metal panel down. There are about 12 screws. They are the 9/32 socket screws.
7. Pull the metal panel up, first dislodge the metal poles connected to the two white clips on each side in the center of the panel.
8. You will now see your actuator with the broken blue clip.
9. Pop off the blue retainer from the actuator. This will take some effort but it will pop off. (here's where you can replace the actuator if it's not making a sound)
10. Place one end of the retainer into the loose metal piece that rotates (left arrow in third picture) and then pop the other end back on to the actuator.
11. Replace the metal panel and clip the poles back into the white clips.
12. Make sure your door handle rod is clipped into the lock before you close the tailgate. If not, you have to work at opening it again by sliding you arm down between the plastic panel and it's not easy.
13. Replace everything. Before you close the door, make sure the door handle works and make sure the actuator is connected.
14. You should now be able to use your tailgate window again!

I am taking a guess your trying to remove the tailgate panel to fix this problem???

Dec 23, 2009 | 2003 Chevrolet Blazer

1 Answer

97 accent. Radio and window crank

the radio....u can take the wiring clip off its ok n the window.....u gotta push the panel in n the clip is like a u push both ends out to push it back evenly then just pull the handle out

Sep 05, 2009 | 1997 Hyundai Accent

1 Answer

Window mechanism broke on passat

Yes. If your window has fallen down and will not roll up.
99% Chance you car is suffering the Infamous VW plastic clip.

The door panel comes off With a T-10 torx or a Hex (Allen) wrench
that will fit and A large Philips Screw Driver..

Remove the Plastic cover on the inside Door handle.
And the Screw or Screw along the Bottom of the door panel.
Then remove the screws that hold the handle the the door.
They are located behind the Plastic plate you removed with a tiny screw driver earlier... Be careful not the mark up the cover whaytprying it up. It is best to pry from underneath. Where marks if made can not be seen

After the screws are out 4 I believe. The Use of a CLip tool ir best.
For getting behind the panel to pop it off. A screw driver will work.

After all the clips are released. Pull the light at the bottom of the panel down and out. Disconnect it ur push it back thought the hole it came from..

Now you need a 10mm socket, or wrench to remove the 12 bolts that hold the metal plate to the Door. Remove all the 10mm bolts, If the widow has not already fallen in the door. It should be released. By removing the Black 2" plugs. THe loosen the bolts that clamp the window the the arms. DO NOT LOOSEN THEM ALL the way, .
Disconect the all the wiring.. THe Door lock cable,can be a pain.
I think it pulls down,.
Next remove the Metal plate. that is the regulator.

reverse to install

Apr 01, 2009 | 2002 Volkswagen Passat

1 Answer

My driver's side window will now roll up how do I fix it?

you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.Sounds like the linkages, or the gears of the regulator are done

Mar 25, 2009 | 1996 Chevrolet Beretta

Not finding what you are looking for?
2003 GMC Envoy Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

75822 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides