Question about 2006 Dodge Stratus

1 Answer

How do i install a new winow washer pump on my 2006 stratus 2.7

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Most likely it is in the bottom of the washer fluid reservoir. go on ebay, craigslist, or a local junkyard and find a used one that matches. stick it in, connect the wiring and the hose and you are in business. bearing in mind that the little plug has one ground and one 12v hot wire, i would first go to the trouble of jumping the existing pump to the battery to make sure it is bad and you do not have a switch problem. if it is your switch and it is in the steering column you have a bigger chore.

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there anyway I can relpace water pump without having to reset the timing on 2006 Dodge Stratus?


no as the belt drives the pump. do the job the right way and you won`t have any problems after.

Jun 20, 2015 | 2006 Dodge Stratus

1 Answer

How to set timing on 2006 dodge stratus sxt 2.4l ?


  1. Set the crankshaft sprocket at TDC by aligning the sprocket with the arrow on the oil pump housing.
  2. Set the camshafts timing marks so that the exhaust camshaft sprocket is a 1 / 2 notch below the intake camshaft sprocket.
  3. Use an Allen wrench on the tensioner. Rotate the tensioner counterclockwise while pushing on the wrench until it slides into the locking hole.
  4. This will allow you to slide your belt on. Hope this helps.
c0c023c2-a3ec-4ead-84df-d57ae04b18b8.gif

May 27, 2014 | 2006 Dodge Stratus

1 Answer

2006 dodge stratus is having trouble turning


Depending on your description of grinding could be power steering pump if whinning noise if tight on steering check steering rods tie rods and also check cvr joints for front wheel drive also depending on the direction of turning and which way is worse check the struts might be binding on

Apr 28, 2014 | 2006 Dodge Stratus Sedan

1 Answer

2006 dodge stratus code p0340 was driving down the


Code 340 is for a problem with the cam sensor or circuit.

Aug 27, 2013 | 2006 Dodge Stratus

2 Answers

Replace power steering pump on 06 chevy uplander


I just finished replacing mine.

It is much easier if you do these steps:

1. Remove the serpentine belt.
2. Remove the nuts holding the main fuse box over the battery.
3. Remove the reinforcing bar over the battery.
4. Remove the battery.
5. Remove the windsheild washer tank.
6. Now you have access to remove the pump pulley. Without removing the stuff, it may be possible, but it will be extremely difficult.
7. Remove the pump pulley.
8. Loosen the high pressure hose fitting.
9. Remove the return line clamp.
10. Remove the power steering pump mounting bolts.
11. Remove the high pressure hose fitting.
12. Remove the power steering pump while sliding off the low pressure hose.
13. Remove the clips holding the reservoir on the pump.
14. Remove the reservoir.
15. Install new o-ring on the reservoir.
16. Install reservoir on new pump.
17. Install clips to hold reservoir on pump.
18. Install new o-ring on high pressure fitting.
19. Place new pump in position while sliding on low pressure hose.
20. Loosely attache high pressure fitting.
21. Tighten pump to mounts.
22. Tighten high pressure fitting.
23. Install clamp on low pressure hose.
24. Install power steering pulley.
25. Install washer reservoir.
26. Install battery.
27. Install reinforcing cross member.
28. Install fuse panel.
29. Install serpentine belt.
30. Bleed the power steering system.

Jul 08, 2012 | 2006 Chevrolet Uplander

2 Answers

Installed new fuel pump on 2006 dodge stratus 2.4-car still will not start-wants to start-?


Sometime new isnt all that is new but lets say its good. Okay how the fuel filter probable good. so let move on can you put some fuel in the throttle body and give it a start and does it start up longer than stall. If it does you may have the fuel problem still. Now remember there is a linear idle air control motor key on step on the gas pedal does it react. yes okay next step turn key on does the fuel pump operate momentarily crank it it should operate for 2 seconds if it doesnt then you will need to reapir the crank sensor before you do that the ASD relay should energize it that doesnt youll need to find the short. but for now check for spark if no spark correct the crank sensor

Apr 22, 2011 | 2006 Dodge Stratus

1 Answer

Engine cradle diagram for 2006 dodge stratus


4cyl dodge stratus 2006. passenger of car- engine compartment, what pumps or generators compressors on on the bottom? a/c on top? which is underneath?

Jan 02, 2011 | 2006 Dodge Stratus

2 Answers

How to replace fuel pump on 2006 dodge stratus


Disconnect the negative on the battery. Unbolt the small bolts under the gas door holding the fuel neck in place. Put a small floor jack under the gas tank holding it up and loosen the straps holding the tank in place. Once you have the gas tank down there is one ring holding the fuel pump in place. Remove the fuel hoses, electrical connecters and then the fuel pump. When you go to install everything back make sure to change the O-ring on the pump seal also. Install everything backwards of removal.

Apr 28, 2010 | 2006 Dodge Stratus

1 Answer

How do I fix a timing belt on a 2006 Dodge Stratus


Timing belt for a dodge stratus, 2006 4 cylinder copy of diagram of how to install.

Mar 31, 2009 | 2006 Dodge Stratus

Not finding what you are looking for?
2006 Dodge Stratus Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...