Question about Dodge Dakota

2 Answers

I need to check and change if needed spark plugs on a 2003 Dodge Dakota. I do not understand how to check them or change them.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 11,800 Answers

Lift the hood, take a sparkplug wrench ($10 in all service areas), find the plugs and  - one at a time - take the high tension lead off it and unscrew it. To test it all you have to do is look at it - if it has carbon or other deposits on it and it's older than 20k miles then it has aged and must be replaced.
All plugs are changed together as a set.

Posted on Aug 30, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

You cant check the plugs without the right tool to do this with
you can change them but only take out one plug at a time so you done mix up the plug leads,,, if you have the tools to do this job

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Don't know where no.4 cyl. is at-need to change spark plug -2003 dodge dakota slt v6


looking at front of motor its the second spark plug back on the left side

Apr 03, 2011 | Dodge Dakota Cars & Trucks

1 Answer

Distributor cap diagrahm for a 1992 dodge dakota 3.9 L what is the correct order for the spark plug wires on the distributor I know the firing order is 1 6 5 4 3 2


Here is a firing order diagram and note the distributor cap latch positions between terminals 1 and 2 and 5 and 4, and let me know if you need any help to understand this diagram or if you require any further assistance.


321004f.jpg

Oct 21, 2010 | 1992 Dodge Dakota

1 Answer

2004 Dodge Dakota V8 that is Idling very rough and the engin stops at times, and the automatic transmission is also not shifting smoothly.


transmission probably needs fluid and filter change. as for the the engine not running smootly, it may be in need of a tune up, you know, changing air filter, spark plugs, spark plug wires... or it could be a weak fuel pump.

May 28, 2010 | 2004 Dodge Dakota

1 Answer

Spark plug gap


.040 for 3.9L, 4.7L & 5.9L

Apr 11, 2009 | 2003 Dodge Dakota Club Cab

1 Answer

The check engine light is on and the diagnostic code is 43, on my dodge dakota 1997, 3.9L. Engine is weak and misfire. Check spark plugs (OK)and everything else there is. Am I missing something? What?...


Plugs need to be changed every 30K, and wires, cap, rotor every 60K. Could be a weak coil not putting out enough spark, could be the pickup in the distributor, could be timing is off from stretched timing chain, could be weak compression. Check the basics first.

Mar 06, 2009 | 1997 Dodge Dakota

2 Answers

Location of spark plugs in 2005 dodge dakota


To change the sparks on a 2005 4.7L Dodge Dakota you will need the following:
  • Spark plug socket
  • Ratchet
  • Torque wrench
  • Extension
  • Flat-tip screwdriver
  • Make sure the truck is cold!!!

Note you will have to remove the air intake located at the top of the engine, and will have to move some of the coolant lines out of the way.

At the top of the engine there are 4 sparks on each side. The coils are held in place with a 10mm bolt. Undo the 10mm bolt and unclip the coil. Next pull out the coil.

Insert the socket, with extension into the spark plug hole.

Remove spark plug.

Check the gap on new spark plug, it should match stock.

tighten to approximately 25ft.lbs. (check spark-plug packaging for exact torque requirements).

repeat this process with all other sparks.

be sure that no dirt gets into the spark plug holes.



Jun 24, 2008 | 2005 Dodge Dakota

2 Answers

I need information on how to change spark plugs on a 2004 Dodge Dakota 4.7 liter V-8


Remove independent coil from each spark hole,and then remove sparkplugs with a socket with extention.

Jun 04, 2008 | 2004 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...