Question about 1999 Dodge Ram
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you backup lights are not working as well, I would say check the fuse for the backup lights, if the fuse is good, see if you are getting power to that fuse. We had this problem and after weeks of searching and changing sensors, we found the backup light fuse was good, but not getting power. Ran a wire from that fuse to the cig. lighter fuse and all woprksf great.
Posted on Jul 10, 2009
Even if the proportioning valve is wide open the rear brakes should not lock up, this is indicative of the front piston not working on the master cylinder, if there was a problem with the abs it would throw a code so to check use two people to do this one to apply the brakes and one to tun the wheel. apply the brake gently while turning it by hand with all 4 wheels off the ground, if the wheels stop at the same time for all for wheels then you have another problem, Do this with the key on engine off in neutral. It sounds like you have a problem with the primary brake shoe the front of drum brake in rear or if disk then the disk brake. Check to see if the Emergency brake cables are not binding if the e-brake is disc the wire cable where the wheel splitter is may be frayed and is keeping the emergency brakes applied and causing this to happen. If this is not explained in a way you can understand post a reply and tell me to clarify if you don't understand what I am saying. The reason I say to do it without running is it will not use the ABS system to mess with your results this will test the mechanical area, thats where i think the problem is. If you let to much fluid drain out it is possible when you started bleeding the brakes if you did not bleed the fronts first you may have damaged the master cylinder piston seal for the disk brakes.
Posted on Dec 01, 2009
Tips for a great answer:
Apr 05, 2015 | Cars & Trucks
May 18, 2011 | 2007 Dodge Ram Truck
Feb 15, 2010 | 1994 Oldsmobile Cutlass Supreme
Dec 07, 2009 | 2001 Honda Accord
Nov 26, 2009 | 2001 GMC Yukon Denali
Oct 01, 2009 | 2004 Nissan Frontier
Aug 23, 2009 | 1998 Ford Windstar
Aug 16, 2009 | 2002 Mercury Mountaineer
Jan 09, 2009 | 2001 Ford Escape
Nov 14, 2008 | 2000 Chevrolet Silverado
Mar 06, 2017 | 1999 Dodge Ram
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: