SOURCE: removing door panels on 1999 bmw 328 ci
air bag is fixed to the actual door,not your interior panel, make sure you remove the airbag badge also as there is a securing screw behind it as well as the three below the armrest,there is also a row of securing clips along the top edge but a good sharp tug is required.
SOURCE: How to remove the front door driver side pannel / molding?
Hi Leon, I have a E34 1995 5 series and had to take door cards off. They're predominantly held on by plastic button clips around the edge/circumference of the door card HOWEVER there is a couple of screws hidden, 1 is behind the chrome door pull/lever a little round plastic cover hides it the other is behind the top of door handle maybe on yours behind door mirror electric adjuster button. one scew is philips the other Torx when pulling the card off the clips try a large flat/wide implement to prise it away as you may breaks some of the clips (£2/3 eBay) One more thing the door handle locates into a grip from behind you'll need a long screwdriver to push the tang up to release it. All the above should be well similar to your model. Oh! nearly forgot remember to unscrew/take off the door pin that goes up and down when locked/unlocked
Good luck!
Paul 'W'
Onyer~EDson(:0)~[><
SOURCE: do I remove front door panels on a 1999 BMW 528i to replace
outside handle or inside well there are little plastic windows on the trim panel start there then take the inside mirror cover off and then pull at the bottom of door pull out the side and then pull up on trim to take off unhook door switch from botom and then the inside handle is easy from there but if your looking for the outside handle take the vapor barrier of and the take the bolt thats holding the handle out if you cannot then you must drop the lock or latch it has 3 bolt on the outer edge of jamb then you can get the hanlde out its 10mm then go backward the same way
SOURCE: taking the front door panel off my 525 bmw
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: Removal of door panel for BMW 5 series for removal of wing mirror
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
79 views
Usually answered in minutes!
×