Question about 2004 Mercury Mountaineer

1 Answer

Backlights our sticking - 2004 Mercury Mountaineer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 252 Answers

Get on the floor on the driver side with a flashlight. Behind the brake pedal is a bracket and the brake swicth. If the rubber stopper is gone, worn down or broken, replace it or fill the gap with epoxy glue.

Once repaired/replaced check that when you press the brake, the lights come on and when you release it the lights go off. You ll need a helper for this.

Check the upper brake pedal bracket for play. If it moves too much, take it apart, clean it up and grease it to make sure it doesnt cause the brake swicth to stay pressed.

Hope this helps, please vote :)

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Backlights are not working


auto or stick?, what year?
fuse blown!
if fuse good, the rev switch in PRNDL is bad. wiglgle shifter in R while person 2 looks..
both lamps bad , unlikely.
one backup lamp shorted, try new lamps.

Jan 04, 2014 | Toyota Yaris Cars & Trucks

1 Answer

Command lcd backlight


The LCD backlighting is LEDS and.they are integrated.. unless you have some good electronics knowledge replacing them will be next to impossible.. the only other way is to replace the entire unit either from the dealer or a savage yard.. good luck

Dec 18, 2013 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

NO BACKLIGHT ON DASHBOARD


turn on the parking lights walk to the back of the car. no tail lights either? find what fuse burnt out and change it. hope this helped

Nov 21, 2013 | 1996 Ford Probe

1 Answer

2005 Buick Lesabre. left side radio buttons backlight, steering wheel buttons backlight, and temp panel button backlighting are all out, but good on the right hand side and two other right side buttons on...


These are actually the bulbs that have went bad. It would be quite expensive. I have a 2004 that has done the same thing. No lights behind any buttons any more except the ac heater controls I replaced last year.

Oct 22, 2017 | 2005 Buick LeSabre

1 Answer

How do you replace an odometer backlight on a 2005F150


You have to remove the odometer cluster from the dashboard. It should be screwed of clipped into the dash.

Jan 19, 2013 | Cars & Trucks

1 Answer

How do I trace back from backlight to fusebox


loop it to teh other other side of the vehicle ,quick and lot less hassle

Oct 15, 2012 | Toyota Toyota Cars & Trucks

1 Answer

How to change backlight : how to disassembly?


If you're talking about the backlight on your radio you can contact your Honda dealer to see if your vehicle was one that they extended the warranty for with a free repair.

Oct 03, 2009 | 2004 Honda CR-V

Not finding what you are looking for?
2004 Mercury Mountaineer Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

fordexpert

Level 3 Expert

5687 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...