Question about 2007 Mini Cooper S Convertible

1 Answer

ABS light comes on and stays on. Everything seems to be ok but this light comes on and stays.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 137 Answers

Its a problem with sensor at wheel disk on front normally passanger side, check disks are not overly worn. hope this helps ( rate me thanks )

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just had my motor rebuilt after hitting a pothole&busting my oil a on my 2006 Chevy HHR LS, &everything is fine with motor,but when braking the steering wheel&brake pedal shakes hard&car seems to be...


Sounds like you ABS is working correctly, the light will come on when the system is activated, and from the sounds of things(oil pan broke) it did. Were the rotors for the brakes checked for run out? Sounds like a warped or bent rotor. If you were having problems with the ABS the light would stay on, deactivating the system.

Mar 15, 2017 | 2006 Chevrolet HHR LS

1 Answer

.abs light


I would say that the brake controller is not compatible with the abs system disconnect the brake controller. Reset the cpu to get the abs working with no light showing apply the brakes again and see if the fault reappears. IT could all be in how the controller is wired into the system

May 01, 2013 | 2006 Toyota Land Cruiser

1 Answer

Brake light and abs light is on


Red lite comes on at startup to ck. system. If amber lite stays on, ck. brake fluid level and see if emergency brake is partly up. This shows problem with anti lock system if it stays on, not main brake system. If all is ok with this but still stays on Have ABS system checked. Haynes repair manual, 95-2003 Windstar, all models.

Mar 24, 2013 | 2003 Ford Windstar

2 Answers

Abs brake light


The Brakes may seem to work okey, but you have an
ABS Braking System light on- indicating a system fault,
just like any other check light you get

Do you not check for codes almost the same day any dash light
or check light comes on?

It will bite you some day-- if you ignore the reason they are there

Dec 27, 2012 | 2001 Oldsmobile Aurora

1 Answer

I have a 2007 chevey equinox front wheel drive and the stabili Trak comes on and the engine reduces speed . whats wrong with it?


Rust on the abs sensor or bad connection the trak light is tied into the check engine light but will not usually throw a code may get a code with a scanner that does abs brakes

Nov 16, 2012 | Chevrolet Cars & Trucks

1 Answer

Why is my abs warning light stoppinng on


The abs light illuminated to test the system and usually goes out after a couple of seconds to say everything is ok.
When the light stays on, it means there is a fault with the system and need rectifying. :)

Jul 03, 2012 | 2003 Vauxhall Vectra

1 Answer

ABS and Parking Break dash indicator lights stay on


I HAVE SEEN A BAD BRAKE LIGHT SWITCH.CAUSE THE ABS LIGHT AND BRAKE LIGHT COME ON.WHEN SWITCH WAS REPLACE BOTH LIGHTS WENT OFF.

Jul 22, 2009 | 2001 Ford Windstar

2 Answers

ABS light on 2003 ford explorer stays on


It could be a wheel speed sensor. have your brakes inspected. good luck

May 30, 2009 | 2003 Ford Explorer

1 Answer

2004 focus brake & ABS light on


Ok the reason I ask is that will help to pinpoint the concern. See ABS system when you first turn the ignition on will do a self test on itself,light turns on for a few seconds then turns off if everything proves out. Then when you start driving once you reach about 12 mph it will activate the pump and perform a 2nd self test.If everything is ok light stays off,if it see's a problem it turns on the light and disables the ABS.
Since yours comes on after you start driving then problem is most likely a wheel speed sensor concern. Since you just did a rear brake job and the problem started after this I would say it is one of the rear sensors.You need to look at the sensors and make sure the sensor and ring look ok and that you didn't get grease or dirt in the teeth of the sensor ring or maybe bent the end of one of the sensors and make the gap larger between sensor and ring.

Feb 20, 2009 | 2004 Ford Focus

3 Answers

Brake, ABS,STC,CHECK ENGINE LIGHTS ON.


I had the same problem which was diagnosed incorrectly 3 times
Could be one of 2 things you may want to check
Have a tech read your codes
Have the ABS Control Module checked by a technician. If that is ok then make sure they look at the altenator
In my case, I was getting voltage spikes that were shorting out system controls -the ABS Control Module and the battery, etc. Once they put in a new altenator, the problem was fixed.

Nov 18, 2008 | 1998 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...