Question about 1998 GMC Sierra

1 Answer

1998 gmc serria drivers window stuck in the up position,, took the door panel off now their is another metal panel that the window motor and reg is mounted to. how do i lower the window and finish taking out the metal panel so i can look at the reg and motor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 5,763 Answers

This is a pane to do, unbolt the plate, you will need to move the plate around and down to get to bolts at the bottom of the glass to remove the glass, with glass removed make sure the linkage to latch is disconnected and any wiring, then you will be able to remove the plate, hope this helps.

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the power windows on a 1998 gmc truck


isn't there a fuse panel under the hood, left side over the front wheel?

Feb 10, 2015 | 1998 GMC Sierra

2 Answers

Window won't go down how do I fix it?


motor may be bad or it may be stuck try to help it down an it may be a fuse I have change the motor on mine an it was the drivers side it was pretty easy

Jun 20, 2014 | 1998 Plymouth Grand Voyager

1 Answer

2000 gmc jimmy drivers window doesn't work but all others work


With key on door open, hold switch in down position and rap door panel with rubber mallet...if it works, need motor, if not, check switch for power out to motor

Mar 01, 2013 | 2000 GMC Jimmy

1 Answer

1998 ford taurus driver window won't go up, I got it up then I hit the inside door panel to get it in place now the window is stuck down again, what doI do?


First, Push the window button that corresponds with the window that is stuck. Slam the door. Jostles the bushings that probably have dried up grease. Then window begins to work again. Second, try taking off the door panel. Once the door panel is off, connect a test light to the harness side of the connector and try the switch in both positions. If it lights up in both switch positions, circuit to motor is fine, and motor is the problem. Sometimes the motors can be fixed, sometimes not.

Aug 07, 2012 | Cars & Trucks

1 Answer

Drivers door window won't roll up


You need to remove the inner door panel and see what happened inside the door. It sounds as if the regulator may of went bad or broke and needs to be replaced.

Dec 12, 2009 | 1998 GMC Suburban

1 Answer

Drivers electric window stuck in down position


actually you have thought of all but the prob. The track has jumped, making the motor not move the window. Sometimes you can gently slide the window up by hand and then the motor will catch the track and finish rolling the window up

Jul 04, 2009 | 1998 Ford Taurus

2 Answers

Window stuck in the down position


take it to a shop or take the door panel off and your probley gonna find a striped gear or the rubber thats protecting its track is bound up

Mar 20, 2009 | 2003 GMC Sierra 1500

2 Answers

1999 GMC Suburban - how to install dr side power window motor/arm


The window should be put in a closed position.
Hidden screws behind buttons of the same color as panel should be opened up using a pick or small screwdiver.
Pry the lower part of the panel away from the door using a paint scraper, The lower half of this panel is usually held in with plastic fastners. When pulled hard enough they will release. These fastners are replacable you can buy them at your local body shop. After releasing all plastic fastners lift door panel off door lock in an upward thrust. Be careful not to pull to far away from door due to wire harnesses and speaker wires ect.. These can be uncliped to remkove whole panel. To operate window you can replug window harness wires in order to bring the window into the proper position to remove bolts that hold it into place. Carefully position glass in upward position and duct tape in place.
The regulator is held in place by three or more bolts.
Remove regulator.
Compare your new part to the existing window regulator.
Installation is reversal of removal.
Any questions get back!

Jan 17, 2009 | 1999 GMC Suburban

Not finding what you are looking for?
1998 GMC Sierra Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...