Question about 1996 Acura TL Series

1 Answer

Car is getting fire and gas. What would cause it not to crank?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

First make sure the gear shifter is in Park. If nothing happens try moving it to Neutral (N) and see if it cranks then , you may have a bad safety switch. if still nothing then check for power to the starter when key is Start position with the help of a friend. or the starter just gave up the ghost. try that.

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 pt cruiser it is getting gas and fire but the fire is weak


Weak spark could be bad coil(s) or ignition module. Even a bad groud strap can cause this, but most common is module.

May 04, 2015 | 2002 Chrysler PT Cruiser

1 Answer

Car is fireing an getting gas but want crank


if it cant crank there is no spark , there will never be fueling.
The starter is first. does it crank over the crank shaft fast.
yes, i must guess.
then next is spark, with no spark , EFI cuts fuel. (no fires)
so if it cranks the crank shaft fast (look) then check spark now.
on all cylinders not just 1.
then post. results for step 3.

Jun 23, 2014 | 2000 Hyundai Elantra

1 Answer

Sorry about the spell trying to eat but my car cut off on me so I was thinking that I ran out of gas so I put some gas in my car an now it's no power inside my car no light inside out my head light come on...


Cranking HARD ?
No Cranking ?
Smell Gas ?
Cranks Fast ?
POSSIBLE - * Battery dead or weak (alternator may not be charging right or gone bad) . * No fire coil pack(s) / rotor button distributor cap Faulty . * Cranks fast ( getting fire but no gas )
FIXES - * JUMP START IF POSSIBLE and if car starts take off 1 battery cable if car dies the ALTERNATOR IS BAD . * Pull 1 plug wire off and check for a hot spark or any spark for that matter .
Could be multiple things with multiple fixs need more info for a more precise answer. Start with the basics POWER +/- , FUEL , AIR , FIRE
Hope this Helps , Flaming Ratchets Auto Repair

Dec 06, 2013 | Cars & Trucks

1 Answer

Not starting


you need three things to start a car gas /fire /and timing check the timing first then see if you are getting fire to spark plugs then pull your fuel line at motor crank motor see if gas Is present no gas replace fuel pump no fire replace coil if timing has jump replace timing belt

Nov 18, 2013 | 2005 Toyota Corolla

1 Answer

94 Oldsmobile 88 Royale turns over, gets fire and gas but won't start


Crank position sensor...i have same car and that happened to me

Oct 14, 2012 | 1994 Oldsmobile 88

1 Answer

Got a good one. my 91 coupe original 5.0 car. motor is new. it ran for two days then went to fire on third day and now will crank and crank but wont fire. got 42psi on fuel pressure 148psi compression on...


the fuel injectors are fired by computer producing a ground signal to them. so its unlikely they are fireing at once.possible power supplie problem but that would cause no injector pulse.beings how the engine was just replaced i would go over every wire and all grounds to make sure they are not shorted or pinched under a manifold or something.if you pull the plugs and they are black then you are getting to much gas. in wich case i would check to see if the fuel pressure regulator diaphram may be ruptured.if you take off the vacuum hose to it and look for moisture from gasoline. or leave hose off and try to start it if gas squirts out that regulator is bad and needs replacement

Apr 15, 2010 | 1991 Ford Mustang

1 Answer

2004 JGC not firing


crank position sensor

Apr 11, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Engine cranks but wont start


lets forget about the items you replaced.This sounds like a differnt problem;1the reason you get the gas smell is because the engine is not fireing and gas is is waiting about in the cyclenders waiting to fire: my main suspect in this case would be battery/alternator;; if your air filter is ok.? try jump starting the car if this successful then its a battery/alternator problem.hope this helps.adrian

Feb 18, 2009 | 1999 Dodge Durango

2 Answers

Dodge Stratus


im working on one now. customers car was running and it just shut off on freeway. I diagnost it , it crank over and power was there , had a spark to plug. i took off the 8mm bolt and looked at the engine cams inside and no movement was there during cranking. taking out is a lil tricky.. im a lil hesitated on putting the new belt on .. cause i have no specs yet.

Jun 24, 2008 | 2002 Dodge Stratus

Not finding what you are looking for?
1996 Acura TL Series Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...