Question about 1999 Lincoln Continental
There are 8 plugs in the V8, 4 on each side. Over each plug is a coil that easily pulls off of each spark plug, hence 8 coils. There are two covers--one over each set of 4 coils and plugs.
The front cover has a metal tag on it that reads, "InTake 32 Valve V8". It has two 10 milometer hex screws holding it on. The back cover is the same shape as the front, but is up closer to the window. You will need just the right socket extension to get the back 4 plugs out. Good luck.
Posted on Apr 20, 2013
On the top of the Huge valve cover gaskets. There is a strip which is separate from the cover. There is a few small bolts holding it on. Remove those screws then the strip will come off. That is what the plugs are plugged into. And it shouold pull off of one whole side. Then you should be able to get to the plugs.
Posted on Aug 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: How do I change the spark plugs
You have to take the engine cover off, and then you should see the spark plugs on both sides of the engine. If you can't seem to find them, just follow the wires from the coil or distributor.
Posted on Jul 06, 2009
pop the trunk and right behind where the lights are pull the carpet
down and their will be of the following depending on the trim.
You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.
If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk
Posted on Oct 26, 2009
Disconnect the battery remove the fanbelt, Theirs a bracket on the top held with 10mm headed bolts, the wire loom for the plug wires can be pushed back enough with the bolts out thiers a cover on the motor that needs to be removed and set aside. theirs two 10 mm headed bolts in the bottom of the altenator that go fronm the front into the engine thier log remove them and the altenator is loose with it moving to the front some you can remove the wires and them the altenator
Posted on Sep 20, 2010
Testimonial: "This is very helpful. Thank you for your quick response."
Tips for a great answer:
Oct 12, 2014 | 2002 Lincoln Continental
Nov 30, 2012 | 2001 Lincoln Continental
Aug 25, 2011 | 1999 Lincoln Continental
Oct 09, 2010 | 1998 Lincoln Continental
May 07, 2010 | 1999 Lincoln Continental
Feb 18, 2010 | 1999 Lincoln Continental
May 17, 2009 | 1999 Lincoln Continental
1,719 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: