Question about Ford F-250

1 Answer

My 1992 F250 will not start. When I turn key all power features work. When I push the clutch and turn the key nothing works.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

Odds are that you just need a set of brushes put in the starter,which you van do your self,you just need a 13mm socket,a 8mm socket,and a 6mm socket to do the job.You can confirm this diagnosis by crossing the top post of the solenoid switch on the starter with the smaller post with a jumper wire and the truck in neutral,if it still does nothing then put a brush set in the starter,if you think that is beyond your skill level then have someone else do it or replace the starter.

Posted on Aug 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1992 ford f250 won't even turn over what's wrong

If it has a clutch, check the clutch switch.

Mar 08, 2015 | 1992 Ford F250

1 Answer

No power ig when turn key

old posts zero answers. what year, no year stated.?
great post, Key does nothing" clear
and is called NO CRANK, if it cant crank it cant start (m/t push starting might)
any time its a no crank,
check ALL FUSES.
1: if A/t wiggle gear shift (P then try Neutral) N might work.
2: if M/T , wiggle clutch , near floor pressed.

if CEL lamp is dead, key on, the fuses are blown.
the CEL must glow key on, or Fuses blown.
easy huh?

Sep 22, 2013 | Honda Passport Cars & Trucks

1 Answer

My 92 f250 will not turn over with key, but will if you jump relay

The problem may be the actual ignition cylinder in the steering column.

Mar 27, 2012 | 1992 Ford F250

1 Answer

I took out my ignition switch on the "RUN" postion (right before you turn to start the truck). I tried to replace it with my New ignition that was made for the ford f250 1992, and the new one i...

Hello, When you installed the Key core, you probably turned the core 180 degrees off. There is also the spring release at the bottom of the Ignition switch. You may not have fully seated the core into the Ignition switch.

The part on the bottom was connected to the Ignition switch through the column. You may have to pull the Ignition switch again or at least remove the plastic steering column cover to align the bottom switch with the top where it connects to the Ignition key.

The lower switch you replaced is part of the Interlock system. It makes sure the trans gear is correct(in Park or Neutral) and that the brake pedal is pushed. If this is a stick-shift then there can be a switch on the clutch pedal. But that switch would not physically keep the key from turning.

Depending on the connection for the Ignition switch, you need to see if the attachment for the rod or cable which runs through the column is set 180 degrees off. Sometimes with having to disconnect and reconnect the Battery to get the electric releases to allow turning of the key, you can get out of sync with the column rod or cable.

That could happen and you installed the parts on the wrong side of the attachments, once you powered up the system, it locked you out.

Aug 19, 2011 | 1992 Ford F250

1 Answer

My 1992 Ford F250 pickup when you push in the clutch it doesnt disengage the gears and doesnt shift. Is there a adjustment to tighten up the clutch pedal

Those clutches aren't adjustable at all. Sounds to me like either the Clutch Master Cylinder is bad (or could even need fluid) or the Slave Cylinder is bad. If it needs fluid there's possibly a leak between the 2.

Nov 22, 2010 | 1992 Ford F250

2 Answers

Have 1990 ford mustang convertible 4 cyl turn key and nothing happens no click nothing light, wipers power windows radio all turn on and work pulled starter and cellunoid and they are fine battery is...

Check for fusible links close to the battery, they may be just wires or they may look like giant fuses. Use an electrical tester to see if current is passing through them. Also you can try using a screwdriver to connect the main bttery power at the starter to the cellunoid to check that it will start. Just make sure it is in park or neutral and the emergency brake is on.

Aug 01, 2009 | 1990 Ford Mustang

1 Answer

Ready remote Brand after market keyless entry remote start the Door lock /Unlock feature wont work when the button is pushed i can hear the unit beep but nothing happens at all all other features work...

that is because the push button pad is broken inside the remote box unit or either it is not making contact with the switch in the alarm remote. may need to replace the push button remote box.

Jul 25, 2009 | 1997 Ford F250 SuperCab

4 Answers

My 1992 Mx5 Miata just wont start!!

remove the key from the ignition get a 21 mm socket and wrench and try to turn the crankshaft clockwise to see if it moves if it moves try to push start the car push the car to about 1 to 2 miles an hour with the key in the on position all dash lights on eg. check engine, air bag, etc. put in second gear and drop the clutch if it starts it's likly you have a bad starter

Nov 12, 2008 | 1992 Mazda MX-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides