Question about Ford Escort

Open Question

I have a 91 Ford Escort 1.9L LX. I'm replacing the timing belt and i need to know how to get the timing marks lined up and I need to know if theres anything I need to do with the coil pack?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 234 Answers

SOURCE: setting timing marks on a 1998 Ford Escort

think u need a tool it locks the engine at top dead centre then u line cams up

Posted on Jun 07, 2009

Ad
  • 701 Answers

SOURCE: where can i find the timing marks on 1998 ford escort zx2 ?

Hello pamgolmon: My name is Roger and i will answer your question. The 2-0 dual cam engine is a interference engine. This means if the engine jumps time at the timing belt. It will bend the valves. As for the timing marks on the camshafts. Their are no marks to be located. To set the timing marks on this engine requires special tools. This makes it expensive for not only the do it yourself mechanic but also the repair shops also. If the valves were bent you must pull the head for the repairs also.
I know this is not the answer you were hoping for but it is the only answer to give. Please rate the quality of the answer as this way we know your answer was correct. Please just ask if you need further help. Thank You for using Fix Ya. Roger

Posted on Sep 09, 2009

  • 1757 Answers

SOURCE: what do the timing belt marks line up on a 94 ford

My apologies for the delayed response. I am going back to answer unanswered questions.
CLICK
on the following LINK. It has the Timing Belt & Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1994/make/ford/model/ranger/1994_ford_ranger_timing_belt_diagram_marks.htm

Posted on Mar 03, 2010

  • 1796 Answers

SOURCE: timing marks 2000 ford escort

Hi!!

Here are 3 diagrams that correspond to the 3 engines types available for your vehicle.


0996b43f80208cbd.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Be sure that the intake and exhaust camshaft timing marks align so that they face each other-Ford 2.0L (VIN A) engines

2.0L (VIN P) Engines


0996b43f8022f40e.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Align the timing marks before removing or installing the timing belt-2.0L (VIN P) SOHC engines



0996b43f80208cbe.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Crankshaft alignment position-Ford 2.0L DOHC Zetec engines

In case the diagrams don't show, click the following link http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?chapterTitle=Engine+Mechanical+Components&partName=Engine+Mechanical&pageId=0996b43f802e7310&subChapterTitle=Timing+Belt&partId=0996b43f802e7275#hd1-1-3

Don't forget to rate this answer, GOOD LUCK

Posted on Apr 17, 2010

Gozer
  • 435 Answers

SOURCE: need diagram for timing belt replacement on 93 ford ranger

I found this website, hope it helps.
http://www.2carpros.com/forum/1993-ford-ranger--timing-marks-vt341394.html

Posted on May 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 ford escort zx2 4cyl camshaft timing marks. how do you line up the cams when you are replacing the timing belt


there are no marks, special tools are needed to align the camshafts with the crankshaft.

Sep 02, 2011 | 1998 Ford Escort

1 Answer

I need a timing diagram for a 1995 1.9 Ford Escort wagon. thank-you so very much.


you dont,make sure you have the proper replacemend belt at hand. get a very clean cloth and clean the front off gears and look for timing marks look very carefuly they are there, move the crank into position and line the marks on all gears with the marks on the back markings [clean both front and back of plates you will see both markings],reliese the tentioner and remove old belt,replace with new belt and after making sure everything is lined and i mean lined no room for a tooth out reliese tentioner,job done re check until happy replace everything and hope you are ok.adrian,,,ps water pump does not have a marking but should be replaced.

Dec 04, 2010 | 1995 Ford Escort

1 Answer

I need the engine timing and the crank pulley torque specs.


Once you align the top and bottom timing marks, and install the belt and tight the belt tensioner, you are done, there is no distributor to adjust ignition timing, it is computer controlled. The torque for the crankshaft bolt is 80 foot pounds. Hope this helps, let me know.

Mar 07, 2010 | 1995 Ford Escort

1 Answer

Ford escort 1.8si 1997 timing belt has sliped how do i reset the timing


REPLACE timing belt. Line up timing marks on cam pulley and crank gear to marks on engine. Get a good manual from autozone it gives a goo picture of where to find these marks.

Jan 18, 2010 | 1997 Ford Escort

1 Answer

I need to know how to time a 1989 ford escort lx 1.9liter


ON the crankshaft, line the keyway at 12 0'clock. There should be a pointer on the crank gear it lines up to the slash mark on the oil pump. On the camshaft line the hole in the gear with the pointer to the the dimple mark on the cylinder head at the 12 0'clock position.

Aug 31, 2009 | 1989 Ford Escort

1 Answer

Timing Belts


Here is a diagram of you timing marks. contact if you need more help. Good Luck and thanks for using FIX YA. http://www.2carpros.com/car_repair_information/tec_info/1991/ford/escort/1991_ford_escort_timing_belt_diagram_marks.htm

Jan 09, 2009 | 1991 Ford Escort

1 Answer

Instruction on how to put timing belt on a 1991 ford escort


First put the car up on jackstands, remove the front left wheel. disconnect battery, take the drive belt off, remove the drive belt tensioner, put a floor jack under the engine with a block of wood or somthing to support it, remove the motor mount by taking the 3 bolts off of the body and the bolt out of the center of the mount. Remove the crankshaft pulley, this may require a pry bar. Take the bolts out of the front cover and remove it. Take the timing belt tensioner loose by loosening the 10mm bolt and rotating the tensioner with a hex key. remove the timing belt. I would also replace the tensioner while I was in there. Line the cam and crank up with the index marks, the cam has a pointer on the sprocket that lines up with a dimple behind the pulley. The crank has a keyway that lines up with a mark on the block. Install the timing belt and tension it making sure the marks do not move, then rotate the engine by hand 2 revolutions and make sure the marks line up again. After that reinstall everything in the order you removed it and fire it up. -Jared

Nov 13, 2008 | 1991 Ford Escort

3 Answers

Timing mark


Cam has a "V". Crank has a keyway. Both should be directly on top of the pullys toward the top of the engine. This is an interference engine. Do not force. After replacing the timing belt, turn the crank by ratchet (clockwise) two complete turns to assure. Should feel some resistence but not more than you can easily overcome. If it stops dead and you KNOW it's "just not right" you are 180 out and need to start over.

Oct 27, 2008 | 1991 Ford Escort

2 Answers

Broken timing belt


its better to get a mechanic to do it then do it your self, if you do it yoursel u will have many more problems for the incorrect timing. find a low cost effective dealer and you will find that cheaper and quicker then doing it yourself.

Oct 20, 2008 | 1999 Ford Escort

3 Answers

Timing Belt Replacement+Diagram


No it will NOT bend valves on this particular engine, if it goes out of time. I would replace BOTH the timing belt and the drive belt at the same time, since both are very inexpensive, even from the Ford dealer. Line up both timing marks on both the cam and crank sprockets in the 12 o'clock position. The marks are very easy to see, once you remove the timing belt cover. Hope this helps.

Jun 22, 2008 | 1991 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...