Question about 2000 Oldsmobile Alero

1 Answer

Need clear oil and tire codes lights on the dash are on

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1st you need to look on the drivers side , end of dash between door there is a fuse box,, there should be a red reset button inside, with the key on every time you push it first the tire light will flash, the next time you push it the change oil light will flash, so you keep pushing it to what you want to reset and hold it in , you will hear several beeps,,, it will be reset

Posted on Sep 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my tire pressure light when tires are fine


My Lesabre has buttons on the left side of the dash. The one called Gage Info has a number of things like oil pressure check tire pressure heat Battery. Push this button till it says check tire pressure To reset your light push the reset button and hold for fifteen or twenty second and the light on the dash should go out and it will show tire pressure ok on the gage. Before you reset check all four tires for air as one tire could be down 8 or 10 lbs and the light will come back on. they all have to be the same pressure.
When you change your oil you should reset the oil section as well and hold reset the same as above. The oil section tells you how much oil you use over an amount of time.

Apr 01, 2016 | 2004 Buick LeSabre

1 Answer

My esp light on my dash will not go out even after I cleared my codes


Check for worn suspension parts, uneven tire wear, mismatched tire sizes etc...
Was the vehicle hit or in an accident however minor, did the undercarriage contact debris on the highway, was the vehicle recently serviced (brakes or tires)

Oct 23, 2014 | 2006 Chrysler 300

1 Answer

The Vsc on 2003 Lexus RX 300 engages front passenger side tire only,VSC light will eventually come on and stay no issues,clear the light and problem returns !any help?


Why have you not had the vehicle at a shop, so they
can check the systems for codes & at least find a problem?

You clear dash lights,you clear ALL the data needed to work on
any vehicle, until the lights come back,codes return or emission
monitors run

Jul 26, 2014 | 2003 Lexus RX 300

1 Answer

1999 f350 superduty dash light with the (!) came on what is it for


Sounds like the low tire pressure indicator. Check the air pressure in all 4 tires. If thats not the problem then it could be a sensor gone bad. Cold weather sometimes plays havoc with the tire pressure

Feb 23, 2012 | 1999 Ford F350 Regular Cab

1 Answer

Code p0500 and i already replaced both input and output speed sensors


take the vehicle and have the codes cleared, ( reset ) if you replaced the sensors you need to clear the code,, many places do this for free, so check around, once cleared, ask them to re read the codes again to be sure it cleared for good , you might want to check the speedo , if its working ok, never mind that ,, also, have you replaced the tires recently? a change in size will affect this code, as will a abs brake system fault, ( but if its that the brake icon in the dash will light up )

Aug 18, 2011 | Hyundai Motor 2004 Sonata

3 Answers

What does the B1 warning light on Honda Accord mean? and how can it be reset


This is a service required warning light
B" indicates the following services are due:
- Change engine oil and filter, inspect brakes, check parking brake adjustment - Inspect : steering components, suspension components, rubber boots, brake lines, fuel lines, exhaust system, fluid levels and conditions "1" indicates: - Rotate tires

Sep 22, 2010 | 2007 Honda Accord Sedan

1 Answer

My car has several lights on and im not sure why. I have 2001 olds alero with 125,000 miles on it. The service engine light and the anti- lock and abs lights come on and stay on here lately. any clues why?...


I'll try to answer these as asked.
1. check engine light is telling you that you have an emission control problem and needs to be scanned for codes.
2. The abs and traction control light are connected and when the abs sets a problem code it will turn both on , It also needs to be scanned for codes.
3. Having a tire that is a diffrent size or more worn than others will set the tire pressure lamp and it can be cleared by removing the fuse panel door on the side of the dash and holding the red button in with the key on engine off untill it flashes or beeps and goes out.

Jul 28, 2010 | 2001 Oldsmobile Alero

1 Answer

1997 PONTIAC GRAND PRIX SE TIRE PRESURE


I read in the manual that you get to take it to the dealer and they will clear this wonderful code that activates the wonderful light on the dash. the redneck in me advises the use of black electrical tape over the wonderful light . that is how i fixed mine . I got the same year grand prix

Mar 26, 2010 | 1997 Pontiac Grand Prix

3 Answers

How to reset the computer for oil & tire presurre warnings


There are 4 key ignition settings: Off, Acc, On, Start Turn key to the On position, quickly press the gas pedal 3 times, then turn key clockwise to Start position and actually start the car. You'll hear it chime at you and the change oil indicator light will flash and disappear.

The tire light....Have you checked all your tires for prper air pressure? including the spare? If they all have the maunfactures recomended PSI. Remove the negitive post from the battery for 20 min. to rest puter. If that dont work you have a faulty TPMS on a tire need a new one. Hope this helps

Nov 07, 2009 | 2004 Pontiac Grand Prix

2 Answers

Toyota Tundra 2005. ABS, Airbag, Tire & cruise dash lights flash


how do you turn the maintenance light off after making oil change?

Mar 09, 2009 | 2006 Toyota Tundra

Not finding what you are looking for?
2000 Oldsmobile Alero Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...