Question about 2006 Renault 181

1 Answer

2006 renault expression 1200cc no heater boost on 4 speed......solution remove glove box complete...easy to do and took me about 10 minutes...then look in to the dash on the right and see a multiplug with about 6 wires going to the heater is yellow....squeeze and pull and it will come unplugged.....look at the terminals and one will be burned clean it and do the best repair you are able to..refitt as removed......job done....time 0.5 hrs.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Renault Master
  • 22,219 Answers

In other words a bodge job,like it as dealer would change the the loom and charge a fortune

Posted on Aug 29, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace a ford focus 2005 fan speed control

see this and fix it. God bless you

Remove the passenger footwell lower trim panel underneath the glove box.

  • 2 Open the glove box and remove the screw holding the footwell air vent duct. Pull off the hose and remove the duct. Close the glove box.

  • 3 Disconnect the heater fan electrical connector. Remove the three bolts retaining the heater fan and remove the fan.
  • 4 Disconnect the heater fan resistor electrical connector, and remove the resistor.
  • 5 Install the new heater fan resistor by reversing the above steps.
  • Oct 04, 2012 | Ford Focus Cars & Trucks

    1 Answer

    I need to remove a radio from a 1989 Chevy Caprice. How do I do it?

    1: Remove Ashtray
    2: Remove Glove Box Door
    3: Remove Glove Box (yes it is necessary)
    4: Undo all screws on the center dash piece. there are two up top, two on the bottom and 2 or 3 under the dash
    5: In the open space where the glove box is, find the temp control cable and unhook it from the heater box. Should be a screw and a fastener
    5: GENTLY pull the panel loose. Remember this part is 20+ years old and not easily replaced if broken
    6: Unhook all wires and vacuum lines from the rear of the climate controller remove all wires from radio.
    7: unscrew the radio part of the center dash piece from the metal support frame. it should be str8 forward and easy to do.

    I have done this a few times and it now takes about 10 minutes for disassembly but you should probably figure an hour to an hour and a half to do this.

    Oct 15, 2010 | 1989 Chevrolet Caprice

    2 Answers

    How to change cabin air filter in 2005 pontiac vibe

    it's located behind the glove box. Instructions are in you owners manual. basically you remove the glove box and remove a plastic cover to access the filter. make sure you install the filter right side up. under $10 at

    Aug 08, 2010 | 2005 Pontiac Vibe

    2 Answers

    Fan doesnt work in low speeds

    The resistor is blown , just behind the glove box is a spot where one bolt is showing , looks like a open square cut out the screw holds it inside the cut out , remove the bolt swap out the resistor , but make sure you slide the resistor back inside the open slot , that slot helps keep the resistor from over heating , easy fix may be 10 minutes tops , ebay has the resistor , buy 2 i am on my second one in 5 years

    Jul 03, 2010 | 2005 Jeep Liberty

    2 Answers

    My heater and blower have suddenly stopped working. Been told thta it will be 10.5 hours labour to take dash off and fix heater unit. would that be right.

    It all depends which model we're talking about Renault's manual may in some situations need for the dashboard to be removed but even as a technician there are ways to bypass this problem if we're talking about a Renault Megane 2 or a Renault Scenic 2 and if we're talking about removing the fan heater then it's just a question of removing the glove box but it also may be a heater resistor as the problem.

    Jan 15, 2010 | 2006 Renault 181

    2 Answers

    Where is the air cabin filter in a toyota corolla 2006 ?

    I have an 06 corrolla. Open the glove box, empty it out, and on both sides you will find philips head screws holding the supports. Once removed the glove box will tip forward and expose the cover of the cabin air filter. Carefully remove the cover and pull out the filter.(note the directional arrows of the filter as you remove it) Installation is a reversal of the above.

    May 18, 2009 | 2006 Toyota Corolla

    1 Answer

    Heater fan has only two speeds: off or MAX.

    Yes it is an easy fix, you need to change the fan resistor here is a link to change it. Its about $40.00 at the dealer and its really only 2 bolts.

    Apr 24, 2009 | 2006 Pontiac Vibe

    1 Answer

    Installation cabin filter 2006 Acura TL

    need to remove glove box(mounted withscrews from bottom edge)once glove box removed you will see basically in dead center of glove box opening a approx.1" wide plastic black strap going from top of heater box straight down and wraps towards ft of car. remove bolt from top this strap,it will then pull downnwards and unhook from heater box.this opens up slot in heater box that you see a white holder assy slid into slot .grab ahold of tab and pull outwards removing from heater box. this holder for filter.replace filter(pay attention to directionof flow arrows on filter)slide back into heater unit(has guides it slides into)and reinstall glovebox etc....good luck! Joel

    Mar 21, 2009 | 2006 Acura TL

    1 Answer

    Glove box release so I can change the hepa filter on my 2006 Honda Odyssey

    The procedure for removing the cabin air filter lists to remove the glove box housing. You usually can either ....1 empty out glove box, look and see if there are two tabs (stops) on the box part that tilts out. Often times the plastic box can be squeeze in at both sides to clear the housing. This allows it to tilt all the way down and you're off. or 2- empty out the glove box and completely remove the assembly. This requires removing 4 to 6 screws on sides and likely on bottom to pull out whole housing. Once out the rest should be very obvious.

    Mar 18, 2009 | 2006 Honda Odyssey

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    108 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Renault Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    xxxxxx xxx

    Level 3 Expert

    4869 Answers


    Level 3 Expert

    76630 Answers

    Are you a Renault Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides