Question about 2005 Toyota Corolla

2 Answers

Engine light came on have code number P2716. I know it's in the transmission but it has more than one wire to it. How do we know which wire is bad?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

I cannot remember the specific code, but there is a technical service bulletin from toyota regarding transmission codes in this era of corrola, and the problem is actually computer related rather than transmission related. the fix is to replace the PCM. there is an extended warranty regarding this, you need to check with your dealer to see if you qualify. good luck!

Posted on Aug 29, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 4,749 Answers

Get a book at discount or zone-the counter people r really helpful too

Posted on Aug 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

03 Toyota 4runner 4wd 4.7l had codes p0771 , p0986, and p2716 with vsc light on. Told to replace trans. Replaced with used and now has p0778 and p2716 now with vsc light on and still harsh shifts


Who told u to replace trans?..first thing should have been done was check wiring and connections at transmission and ECM and between the 2...also need to check the pressure control solenoids B and D...its possible the ECM is acting up especially since P2716 came back twice.

Mar 08, 2015 | Toyota Cars & Trucks

1 Answer

Pressure control solenoid electrical fault


code p2716 refers to transmission fluid pressure (TFP) solenoid D --electrical=== causes wiring---TFP solenoid
check all connections are clean and tight . replace the solenoid.

May 14, 2014 | 2013 Mazda MAZDA6

1 Answer

P2716 code in 2007 Toyota Corolla


P2716 -Pressure Control Solenoid "D" Electrical (Shift
Solenoid Valve SLT)
Trouble Area:
1. Open or short in shift solenoid valve SLT circuit. (repair harness wiring)
2. Shift solenoid valve SLT defective. (replace)
3. ECM defective. (replace with a good known one)

Nov 25, 2013 | 2007 Toyota Corolla S

1 Answer

Code P2716


There is a known issue with the 2005-2007 Corolla automatic transmission shift logic. The shift points may seem harsh, and the Check Engine light may be illuminated.

There is a technical service bulletin published (TC015-07) that will address and rectify this condition.

The diagnostic code P2716 will be stored in the computer memory. The procedure involves replacing the Engine Control Module (the computer) with an updated unit.

The repair is covered, under the factory warranty, for 96 months, or 80,000 miles, which ever comes first.

I hope that this helps Corolla you out.

May 05, 2010 | 2005 Toyota Corolla

3 Answers

A/t control-harsh shifting/dtc p2716/mil on


under the hood in the engine compartment is a box with a red top push down on it until you hear a click,this will rest the petrol cut off switch.

Jan 27, 2010 | 2006 Toyota Corolla

2 Answers

Pressure Control Solenoid P2716 toyota matrix issue


There is currently a recall going on for this problem. You can likely get your money back on the prior repairs as well. See this link http://www.toyota.com/recall/corolla-matrix.html. On the left-hand side, you can click to take you to put in your VIN and see if your vehicle is included. My 2007 vehicle IS included, and I just had the check engine light come on and have been experiencing rough shifting for about 6 months. When the light came on yesterday, it was extremely rough jerky shifting. The light went off today. Took it to Autozone and got same code P2716. Toyota has assigned me a case number, but I won't get a call back until Monday or by close of biz on Tuesday. This problem can cause your car to not start, or to shut down while driving. YIKES! The person I talked to at Toyota acted a little too nonchalant about the whole deal. Telling me to just wait for the call that I will get. She said most dealers would not have the part needed to fix this. According to what I have read. That is the reason why Toyota is not sending out the notification letters to the affected parties until mid-September. Check out all the info and good luck. I am a little bit p.o'd about this right now. - Natalie

Oct 12, 2009 | 2006 Toyota Matrix

1 Answer

Transmission code error P2716


The computer wants to know if the transmission is working properly. So it reads the speed of the input shaft and compares it to the speed of the output shaft. It knows which gear you're in because it commanded the transmission to shift into that gear. The turbine speed refers to the torque converter. That's the device that transfers power from the engine to the transmission. Think of two fans facing each other. Turn on one fan and the blades on the other fan will spin. The fan that ISN'T turned on is the turbine. So, with the input shaft or turbine speed, the gear selection, and the output speed, the computer can calculate how efficiently the transmission is working. If the speed is off, it knows that something is slipping inside the transmission. It can then try to boost the fluid pressure to compensate. If that doesn't work, it sets a different trouble code, usually a P0716 code means that the computer has detected a value for the input sensor that's either out of range (way too high or too low), or there's a circuit issue (bad wiring, etc. Should probably get it to a repair shop ASAP before damage is done.

Sep 19, 2009 | Toyota Corolla Cars & Trucks

2 Answers

My check engine code is P2716.


the code is for a pressure control sonenoid located in your transmission

Jul 03, 2009 | 2006 Pontiac Vibe

Not finding what you are looking for?
2005 Toyota Corolla Logo

Related Topics:

632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...