Question about 2000 Buick Park Avenue
HI. your Buick has actually has 4 fuse boxes two under the hood near the batery one will be quite larger then the other next to it and have a start shaped fastener in the middle of the cover this unscrews to get access to the fuses. there will be a listing on the back of where the fuses go. The other will have a snap on cover and hold up to 8 maxi fuses. Again the cover should have a listing of these. You will find another under the drivers side of the dash towards the center of the car. The 4th is under the rear seat. you will need to remover the lower seat cushion to gain access to it. If there is a specif fuse you are trying to locate just ask and i will help you find it. good luck
Posted on Aug 29, 2010
My 98 buick park avenue I was driving and all of a sudden the gauges the radio the heater and the power windows all stopped at once but still got interior light s dash light what could be the problem
Posted on Feb 11, 2014
Windshield wipers will not work can you tell me what is wrong
Posted on Jul 31, 2011
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just accessed mine. It is under the rear seat. You just lift up on the seat, and it pops right out. If you are having problems with the rear defroster, it could very likely be the control module. This is a combination module which the rear antenna, and the defroster grid plugs in to.
When mine went out I smelled a "burnt wire" smell, then it went out.
To access the module, sit in the back seat, drivers side. There is a trim panel that will be by your left ear as you are looking forward. It is the panel that flares down from the ceiling to the rear deck. Gently pull at the edge of this panel, working around the edges, and the small strip which continues over the top of the door.
The seatbelt goes through this panel, so it will be hanging from the seatbelt at this point. There is a ~3" square, black module with the defroster input and output wires, and the antenna wire plugged into it.
You just unplug the wires, pull the one mounting screw, and voila!
On mine the module was obviously melted, as was the wire going into it. I got the replacement from a salvage yard, as the new one was over $50, and the replacement wire was $18. The salvage yard was unable to look it up, so I had to go out to the yard with them and pull it myself. The final cost was $17 (they tried to charge me $40, and I told them I could get it online for that, and they dropped the price).
You can use a crimp on **** connector to put in the replacement wire, but because of the heat in that area I chose to solder the wires together.
BTW, this module fits a wide range of Buicks, and full size Olds.
Hope this helps.
Posted on Jan 20, 2009
need to take car somewhere to have the code read with a scanner,try parts stores first some will do it for free if not the dealers have them
Posted on Sep 15, 2009
The fuse box is located on the inside of the car passenger side. You have to open the door and it is behind the panel on the side of the dashboard. Look under the motor and it will be under the black square box cover.
Thank you !!
Posted on Jul 09, 2010
i have a 98 buick park avenue
i got a problem running it. it start but when i hit the break pedal some light comes out the direction signal and it shuts off i check all the fuse
Posted on Aug 13, 2010
Tips for a great answer:
Apr 13, 2015 | 2000 Buick Park Avenue
Feb 27, 2013 | 2000 Buick Park Avenue
Sep 26, 2012 | 2000 Buick Park Avenue
Jun 20, 2012 | 1994 Buick Park Avenue
Jun 01, 2012 | 2000 Buick Park Avenue
May 17, 2010 | 1998 Buick Park Avenue
Apr 19, 2010 | 1997 Buick Park Avenue
Nov 28, 2008 | 2000 Buick Park Avenue
3,080 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: