- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sep 6, 2008 - So I've searched and I've tried to yank the rear headrests out like what I'm reading and I ... Bimmerforums - The Ultimate BMW Forum - Powered by vBulletin... 3 series & 4 Series (E21, E30, E36, E46, E9x, F30, F32, F33, F44).
1.Lift headrest and headrest support bars trim all the way up. 2.Insert tongue depressor (or slim jim) down the front side of the headrest bar.Push depressor down as far as possible.When the depressor is beneath the headrest trim piece, push headrest all of the way down. 3. Lift headrest to remove.
Lift the headrest to the full upright position, and you will notice on
the plastic piece where the headrest rod goes into, there should be a
small hole in the plastic piece, insert a small tool or paperclip, and then pull the headrest off
I've removed the headrest on my mustang before. Some seats have a zipper or a way to snap the seat cover at the bottom rear. If you open it you can put your arm up the back of the seat. With the headresat down you can feel the locking piece that retracts when you lift the headrest. If you take a long shaft flat blade screwdriver and place it in between and lift up the headrest it will slide out. Yes, getting the screwdriver in place can be tricky but, it was the only way to remove the headrest without having the correct tool. I hope this can work on your vehicle as well.
Most volvo headrest can be removed by releasing the catches which are on the back of the headrest on some models and on the front on others I believe on 960 they are on the back. To release the seat on a 960 look where the shafts should be then follow it down on the back where the seat back top stops then goes in press around that area you should be able to find the catch there pull up on the headrest while releasing the catch you have to do this on both sides. The headrest should come off this also works on 740 and 760 series the volvo 780 is a different story the only way to get the headrest off on that is to disassemble the seat
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.