Question about 1992 Toyota Camry V6

Open Question

Where is the low side service port to recharge my ac on a 1992 camry

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

countrysi248
  • 443 Answers

SOURCE: ac low side service port location

Your service port will always be in the larger line of the two .. which is low pressure side. It might be in the dryer also which is low side.. your dryer is about 3 inches across and 8 inches long and also has your pressure switch for the AC compressor in it.. holler if you dont find it now... thanks Jerry

Posted on Apr 25, 2009

ghost4548
  • 776 Answers

SOURCE: recharging ac on 2001 hyundai sonata gls

No picture to show you, but it's on the right hand side in the engine bay either near the power steering pump reseviore or near the firewall (or somewere inbetween). Anyway, chargine the AC system is done at the "HIGH" side port (not the low side). I assume when you say 'fill' the unit, you're talking about "Charging the System with Refrigerant'?

Posted on Jun 02, 2009

  • 299 Answers

SOURCE: 2004 f250 super duty diesel where is low side recharge port ac

on fords ussualy at reciever drier,if not follow large ac line till you find the schrader port.

Posted on Jun 18, 2009

greg_margo
  • 1959 Answers

SOURCE: i bought one of those recharging a/c cans but it

Always recharge from the low side port.  When recharging, have the car running and the AC on HIGH.  Connect the refill hose to the low side port and the R-134A to the other end of the refill hose.  Once connected, turn the screw on the hose to pierce the seal on the refrigerant all the way.  The car should instantly pull all of the refrigerant from the can.  After the can is empty disconnect the hose and either do a pressure check (30-40psi) or look for frost on the lines and check the inside of the car for chilled air.  Be careful not to overfill with refrigerant as it can cause damage and won't provide any better results.  Best of luck.
Greg

Posted on Aug 28, 2009

  • 1 Answer

SOURCE: where is the low-side service port for a 1990

Well Its located right by where the power steering resouvoir is close to the fender on passenger

Posted on Sep 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How and where to add freon to a1995 sedan deville


Verify ambient temperature is above 65 degrees F.

1. Safety> - safety glasses, long sleeves and gloves, (exposure to refrigerant can cause frostbite).

2. Attach hoses to manifold> assembly, (hi, lo, and fill).

3. Remove caps from service ports, (Low press. Larger tube from evaporator to accumulator - passenger side over fender well; High Pressure - smaller tube from evaporator along firewall towards driver's side). Verify service> ports are clean.

4. Attach low press. and high press hoses to proper service ports.

5. Start car>, reset low refrig code, and turn ac on high and fan on high.

6. Read gauges and compare with chart provided with gauge set.

7. If low and high press readings are both low, then system needs recharge.

8. To recharge, attach fill hose to can of R134a and slowly open low press valve>, (NOT HIGH PRESS VALVE), until low press side reads 40 psi.

9. When flow stops and pressures stabilize close valves> and disconnect manifold from service ports and refrigerant can. Replace service port caps.

Aug 19, 2015 | 1995 Cadillac DeVille

1 Answer

Where is the low ac suction side located on a 1992 buick regal


First find the A/C compressor, it is attached directly to the engine and has a pulley on it. When you turn on/off the A/C while the engine is running you should be able to locate it by listening for it to engage.

When you find it you need to trace the two metal pipes that come out of it. One pipe is the high pressure side and one is the low. You will know which one is the low side when you find the 'tee' with a plastic cap (both high and low have one).

The fitting that comes with the A/C recharge kit will only fit properly on the low pressure port. Sometimes, but not always the low pressure port has a blue cap.

Jun 19, 2011 | 1992 Buick Regal

1 Answer

I have 1994 toyota camry wont to recharge my ac tell me where locate the low pressure port


The low pressure point should be near the firewall of the engine on the passenger side.

Jul 03, 2010 | 1996 Toyota Camry

1 Answer

I want to recharge the a/c compressor of my 1996 Toyota Camry. Where is the low pressure port located?


Find the ac compressor,and look at the ac lines coming from the compressor,the large ac line,is the low pressure service port,just follow it toward the firewall,and you will come to it.If this was helpful,please rate,thank you.

Jun 15, 2010 | 1996 Toyota Camry

2 Answers

Recharge Auto air conditioner


I just did this for my 1994 Camry. Does your camry use the R-134A modern refrigerant? Probably.

Go to an auto parts store and buy a can of R-134A with a pressure guage included. You'll need that guage so you don't overfill the system. I bought one that allows me to save the guage and buy cheaper refills int he future.

There are two AC valves. A small one, located in the left-rear of the engine compartment, behind the strut tower, just in front of where the passenger seat is located. It might have a cap on it marked "L". This is the "Low" port, and is the one you want. The larger "H" port is up near the battery, is bigger, and is the "high" port. You don't want to use that one, and besides, it won't fit the can anyway.

Locate that low valve in the left-rear of the compartment. Take the cap off (if one is still on there). Start the engine and get it up to running temp. Turn on your AC to maximum cool, fan at maximum. Follow the directions on the can. It's pretty simple.

You'll pull back on the bushing on the refill line, and then snap it onto the valve just like you'd find on an air hose. Snap it into place, and then start refilling. Make sure the can is upside down and that you rotate and shake the can to get the coolant out effectively.

Jul 03, 2009 | 1996 Toyota Camry

1 Answer

Ac recharge


locate your evaporator inlet outlet lines usually coming out of the fire wall. then follow the line that runs to the compressor. that is your low side line and the service port should be on that line

Jun 29, 2009 | 1996 Ford Windstar

1 Answer

2004 f250 super duty diesel where is low side recharge port ac


on fords ussualy at reciever drier,if not follow large ac line till you find the schrader port.

Jun 18, 2009 | Ford Contour Cars & Trucks

2 Answers

How to recharge ac in lexus sc 400


There is an AC port near the front of the car under the hood, it's a small silver tube, maybe with a cap. Connect a recharge bottle from an auto parts store on to this port and follow the bottle's dircetions.

May 16, 2009 | 1992 Lexus Sc 400

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...