Question about 1998 Mitsubishi Mirage

Open Question

Where is the ERG valve on 1998 Mitsubishi Mirage?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c17hydro
  • 2984 Answers

SOURCE: how to install egr valve on 2000 mitsubishi mirage

  1. Disconnect the negative battery cable.
  2. Remove the air cleaner and intake hoses as required.
  3. If necessary, detach the EGR temperature sensor connector.
  4. Tag and disconnect the vacuum hose from the EGR valve.
  5. Remove the mounting bolts and the EGR valve from the engine.
  6. Clean the mating surfaces on the valve and the engine. Make sure to remove all gasket material.
  7. Inspect the valve for a sticking plunger, caused by excess carbon deposits. If such a condition exists, clean with appropriate solvent so valve seats correctly.
To install:
  1. Install EGR valve with a new gasket in place.
  2. Install the mounting bolts and tighten as follows:
  3. 1.5L, 1.6L, and 1.8L engines—7–10 ft. lbs. (10—15 Nm)
  4. 2.0L engines—10–15 ft. lbs. (15—22 Nm)
  5. 2.4L and 3.5L engines—16 ft. lbs. (22 Nm)
  6. 3.0L engines—8 ft. lbs. (11 Nm)
  7. Connect the vacuum hose to the EGR valve.
  8. If detached, attach the EGR temperature sensor.
  9. Install the air cleaner and air intake hoses as required.
  10. Connect the negative battery cable.
9772c4c.gif
The EGR valve is retained to the intake manifold with two bolts.

Posted on Dec 07, 2009

alicantecoli
  • 22114 Answers

SOURCE: Where is the fuel filter located on the 1998

underneath somewhere .follow the fuel line

Posted on Mar 17, 2010

  • 33 Answers

SOURCE: how to change timing belt Mitsubishi 1998 Mirage

very difficult don"t recomnd must be done perfect or engine damage. pro. recomend

Posted on Apr 21, 2010

  • 14 Answers

SOURCE: What kind of transmission fluid goes in a 1998

Go to any auto parts store auto zone O'Rielys Auto parts whatever tell them the kind of car and the type of engion wheather automatic or standard trans they will tell you the right kind of transmission fluid to use

Posted on Sep 06, 2010

heimlich
  • 1978 Answers

SOURCE: How to Install a new Alternator Belt on a 1998

First take off the negative battery cable, facing the back of the car reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt. If you need to change the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . Then you can use the adjuster belt to move the pulley to adjust the belt.

Posted on Oct 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much transmission fluid can I put in my 1998 Mitsubishi Mirage DeCoupe


Fred, you can put in as much as it will hold...BUT>> you should only put the correct amount according to the fluid level checking stick...

consult your owners manual!!
1998 mitsubishi mirage de coupe owners manual Google Search

Sep 17, 2017 | Mitsubishi Cars & Trucks

1 Answer

Where is erg valve located


They are located on the intake manifold below the carburetor or fuel injection. They are shaped like a round diaphragm with a hose attachment

Nov 03, 2013 | 2001 Mitsubishi Mirage

1 Answer

I need to replace the water pump on a 1998 Mitsubishi Mirage DE 1.8 liter engine. Must I replace the timing belt at the same time?


No you don't have to, but if it has to be removed to replace the pump, why not be safe then sorry and replace it. They are not expensive and if you break a belt, you could possible get internal engine damage if the motor has interference valves in the engine

Sep 27, 2013 | 1998 Mitsubishi Mirage

1 Answer

Oil leak around engine cover for 1998 Mitsubishi Mirage


Valve cover gasket may need to be replace.
Please don't forget to rate me.

Mar 07, 2011 | 1998 Mitsubishi Mirage

1 Answer

How to change timing belt Mitsubishi 1998 Mirage


very difficult don"t recomnd must be done perfect or engine damage. pro. recomend

Apr 21, 2010 | 1998 Mitsubishi Mirage

1 Answer

Part number needed - Mitsubishi Mirage 1998, 1290cc


the mitsubishi dealership should be able to help you on that

gl G

Apr 24, 2009 | 1998 Mitsubishi Mirage

Not finding what you are looking for?
1998 Mitsubishi Mirage Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...