Question about 2006 Ford Explorer

1 Answer

I just bought a 2006 Ford Explorer - Eddie Bauer. I am trying to locate the 5-digit factory code for the keypad entry. I really do not want to have to take the car back to the dealer. Thanks for any clue you can provide.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 121 Answers

The Code to your door keypad is located inside the rear storage area where your jack is stored. Its kind of hard to get to but its on the module in front of your jack on the backside on a sticker. Fold down the back seat. Open the storage compartment on the driver's side of your Explorer. Using a flashlight, look at the plastic cover hidden in the compartment above the jack. There are 5 large numbers. This is your code. It does not have a label telling you what the number is. Try it and it should work.

God Bless and Good luck!
Fold down back seat. Open the storage compartment on the driver's side of truck. Using a flashlight, look at the whit plastic cover hidden in the compartment above the jack. There are 5 large numbers. This is your code. It does not tell you that it is. Try it and it should work. Good luck!! 03 explorer xlt Albany, NY
Fold down back seat. Open the storage compartment on the driver's side of truck. Using a flashlight, look at the whit plastic cover hidden in the compartment above the jack. There are 5 large numbers. This is your code. It does not tell you that it is. Try it and it should work. Good luck!! 03 explorer xlt Albany, NY

Posted on Aug 29, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 56 Answers

SOURCE: Need keyless door entry code 2006 explorer

Open the glove box. On the sides of the glove box you will see 2 tabs pull them to open the box all the way. When you have that open there is a black computer with info printed on it. The code is there.

Posted on Jul 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find the factory keyless entry code for my 2006 Ford explorer Eddie Bauer, the wallet card wasn't in the glove box. I removed the seat belt panels in the back and no code. Help please!!!


Look thoroughly thru the owners manual if it has one. A lot of times people write it down inconspicuously somewhere in that manual.
Some of the vehicles have it written near the computer around the firewall under the cowl.
Have you asked Ford dealer? don-ohio

Apr 19, 2017 | Ford Cars & Trucks

2 Answers

How do I find keyless entry code on a 2007 ford exployer


I believe you can get this from a Ford dealer and obtain it with your VIN number.

Feb 28, 2015 | 2007 Ford Explorer Eddie Bauer

1 Answer

HOW TO FIND AND PROGRAM A KEYLESS ENTRY


Keyless Entry Keypad FAQ Ford Explorer
The keypad can be operated with the factory set 5-digit entry code
You can use the keyless entry keypad to
  • Lock or unlock the doors without using a key.
  • Open the liftgate window.
  • Activate or deactivate the autolock feature.

Where the code can be found
  • This code is located on the owner's wallet card in the glove box
  • Is available from your authorized dealer via scan code
  • Is marked on the computer module

Computer Module location
  • 1995 thru 2001 is located in the jack storage compartment in the rear of your Explorer. First remove the panel to the jack storage compartment. Towards the front of this area you should see a metal box this is your auto-lock module(way up front next to your rear left passenger seat). On the back side of this is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done.

  • 2002 thru 2007 is in the right panel behind the middle row window. It is below the seat belt mechanism. You have to pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module.

Programming a personal entry code The factory set code cannot be reprogrammed but you can create your own 5?digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

  • 1. Enter the factory set code.
  • 2. Within five seconds press the 1 ? 2 on the keypad.
  • 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
  • 4. Press 1 ? 2, 3 ? 4 or 5 ? 6 to indicate which of the three personal entry code positions you wish to use.
  • 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.

Mar 18, 2011 | Ford Expedition Cars & Trucks

1 Answer

Where is the computer module to get the 5 digit entry code for the 2006 explorer


How can i do to change the 5 digit entry code for the ford explorer eddie bauer 2006 with engine 8 cyl, 4,6 L

Feb 19, 2010 | 2006 Ford Explorer

3 Answers

WHERE DO I FIND THE KEYPAD CODE FOR MY 1997 FORD EXPLORER


The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo). You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

The last weekend I search my RAP, find label for read code and now is working.

RAP Location...
530d8ab.jpg


Label Code location...

9fa0a4d.jpg

I really hope help with this; remember rated and comment this help.

Feb 16, 2010 | 1997 Ford Explorer AWD

2 Answers

How can I get my keyless entry code numbers for my 2005 ford explorer xlt?


on my 2005 eddie bauer it was behind the back seat on the side panel between two windows. you have to take off the inside molding and there's a number printed 5 digit i think...i think it was right side.

Oct 03, 2009 | 2005 Ford Explorer

3 Answers

Is there a way to reprogram the keypad for the keyless entry on a 1999 ford explorer?


if i was u i would talk with ppl who do aftermarket security systems they would have a really good answer for that or someone on the internet might sell a reprogramer on like ebay

Aug 10, 2009 | 1999 Ford Explorer

1 Answer

Need keyless door entry code 2006 explorer


Open the glove box. On the sides of the glove box you will see 2 tabs pull them to open the box all the way. When you have that open there is a black computer with info printed on it. The code is there.

Jul 29, 2009 | 2005 Ford Explorer

Not finding what you are looking for?
2006 Ford Explorer Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...