Question about 1992 Plymouth Voyager

1 Answer

Do I have to pull the engine to replaace the timing belt on the 1992 plymouth voyager?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, I can remember the first time I popped my head under the hood of one of those with the same dilema. If you take off your accessories and belts, you do however have to support the motor with removing the mount. I hope this helps, and if you have any more questions please feel free to ask.
Thanks,
Joey

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 plymouth voyager 3.0 liter timing marks


The mark should be on the sprocket, clean it well to see it

Mar 30, 2013 | 1992 Plymouth Voyager

1 Answer

Engine backfired and quit running


The vehicle has "high mileage" which means you probably broke a timing belt ($50 for the belt). About 2 hrs to replace it yourself.

Dec 16, 2012 | 1992 Plymouth Voyager

1 Answer

Where is the belt tensioner on a 1992 plymouth voyager


Passenger side of engine approximatly in the middle of all the pulleys. Access from underside. Remove front Rt. tire and then the mud splash guard.
Good luck

Dec 08, 2011 | 1992 Plymouth Voyager

1 Answer

Diagram for a 1992 plymoth voyager v6 serpentine belt


Just confirm us your right model:
- Model VOYAGER Engine V6 3.0L 2972cc 181ci GAS FI N 3
- Model VOYAGER Engine V6 3.3L 201ci GAS FI N R

If you click on the links, we can send a positive answer that we have the diagram on our database.

Hope this helps. Your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 24, 2011 | 1992 Plymouth Voyager

2 Answers

Where is the ecm module located 92 ply voyager 3.3l


The 1992 Plymouth Truck Voyager 4WD 3.3L MFI 6cyl the Engine Control Computer is located under hood, driver side, front side of strut tower, rear of headlight, mounted on inner fenderwell .

Hope this helps (remember to rate this answer).

Jun 13, 2011 | 1992 Plymouth Voyager

1 Answer

How do I remove oil pump on 2000 Plymouth voyger


The oil pump removal procedure for Plymouth Voyager 2000.
A oil pump is usually located in the oil pan. If you want to change the oil pump and replace it with a new one, roll up your sleeves and get ready for some dirty work.
The procedure to remove oil pump is as follows:--
  • Drive your vehicle up onto ramps or lifts so you have room to work as you pull out the oil pump. You could also use a jack, but make sure you brace the front wheels so they don't roll. In addition, set the emergency break firmly into position so the car doesn't roll.
  • Remove the engine front cover then drain the engine oil and take out the oil pan. It is under the engine and looks like the bottom of the motor.
  • Unscrew the oil pump mounting bolts with a wrench and proceed to remove the oil pump itself by pulling it down and out of the engine. Avoid getting any contaminants into the oil pump assembly while removing.
The Water pump removal procedure for Plymouth Voyager 2000.
The water pump is the heart of the Plymouth Voyager's cooling system, circulating the coolant. When the water pump is faulty, it can cause serious damage to the engine of your Plymouth Voyager.
  • Disconnect the negative battery cable.Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan.
  • Remove the right inner splash shield and the accessory drive belts. Support the engine underneath and remove the right motor mount with the bracket.
  • Take off the front cover and remove the timing belt along with the timing belt idler pulley. Also remove the camshaft sprockets, the rear cover to the timing belt and the alternator with its bracket.
  • Loosen and remove the bolts to the water pump and remove it from the engine.Install the new water pump after inserting a new o-ring gasket. Tighten the bolts to 105-inch lbs. Make sure that the pump can move freely by rotating it by hand.
  • Replace all components in reverse order. Tighten the camshaft sprocket bolts to 75 foot pounds and the timing belt idler pulley to 45 foot pounds.
  • Refill the cooling system with coolant and reconnect the negative battery cable. Start the engine and check for leaks when it reaches normal operating temperatures.

Loud noises coming from the cooling system could be a sign that your water pump needs replacing. A leak in the coolant may also be an indicator. You can expect that a water pump will need to be changed every 70 to 100 thousand miles or so in a Plymouth Voyager vehicle.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Jun 13, 2010 | 2000 Plymouth Voyager

2 Answers

How do you set the timing on a Plymouth Voyager ? I have to repace a broken timing belt. I was also told to replace the water pump is that true.


It is recommended because if you have to change the water pump belt change since you have to remove it and you save work in the future as we recommend changing the camshaft seals and crankshaft as it saves time and money

Feb 03, 2010 | 1992 Plymouth Voyager

1 Answer

I have a 98 Plymouth voyager 3ltr can i replace that motor with a 92 Plymouth 3ltr


yes they should be the same you will have to swap some of sensors though also before you put the engine in you should replace the timing belt and water pump

Oct 14, 2009 | 1992 Plymouth Voyager

1 Answer

How do I replace the serpentine belt on my 1998 Plymouth Grand Voyager with a 3.0L V-6 engine


you need a serpentine belt removal tool attech to belt tensioner or a the right size socket for the no and pull up or down to realease belt then slide belt off

Oct 09, 2009 | 1998 Plymouth Grand Voyager

2 Answers

1997 plymouth grand voyager v6 3.0L broken timing belt


I had the same thing happen, No, I was told this is not one of the engines that allows the piston to contact the valves. I replaced the timing belt 2 years ago and had no valve problems.

Sep 22, 2009 | 1997 Plymouth Grand Voyager

Not finding what you are looking for?
1992 Plymouth Voyager Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...