Question about 1998 Mercury Villager

1 Answer

Replaced rear air conditioner/ heater control and it still does not work.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

It's the front controls. Need soldering. go here and read procedure. If you can' t do it, I will repair yours for $25 & exchange.

let me know

gerry

http://groups.yahoo.com/group/villagerquest/

Posted on Sep 09, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: My heater is not blowing

you need to look at the water heater valve if it is opening or not. it should allow hot water from the radiator to flow to the inside of the car and the air will blow on the heater core...

maybe the valve is stucked close

i hope i was able to fix ur problem...

pls rate me..tnx
drcool

Posted on Jul 27, 2008

  • 512 Answers

SOURCE: Front air conditioner and heater

check the blower motor fuse or possible bad blower motor

Posted on Nov 14, 2008

  • 449 Answers

SOURCE: Heater/Air blower not working.

check fuses. first then check controller before changing the blower.

Posted on Dec 24, 2008

  • 68 Answers

SOURCE: climate control doesn't work

check for blown fuses in your fuse box

Posted on May 14, 2009

  • 1 Answer

SOURCE: air conditioner and heater makes loud noise when turned on.

This might be the noise problem in your blower.The blower is out of balance with this added weight.5610f51.jpg

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot air coming out left window vent with air conditioner on


heater control valve probably stuck ,locate it under hood right rear(heater hoses will be connected to it.) tap on it with air con. on and eng. running. if this fixes problem,valve will have4 to be replaced.

Aug 23, 2013 | 1998 Mercedes-Benz E-Class

1 Answer

Heater and air work in the front but does not blow in the in the rear


Year make and model, and what have you checked so far ?

Feb 03, 2013 | Cars & Trucks

1 Answer

Heater controls not working


check heater and air conditioner ignition fuse.sound like heater control module not getting power.

Aug 31, 2012 | 2005 Hummer H2 SUT

1 Answer

Heater / air conditioner fan control doesn't engage fan. Previously, it only worked in high speed.


I would replace the blower motor resistor first then see if that corrects this. The resistor is located next to the blower motor under the dash.

Jul 16, 2012 | Cars & Trucks

1 Answer

How to replace a heater core


Heater Core Removal & Installation Front To Remove:
  1. Make sure you have the anti-theft codes for the audio and the navigation system, and then write down the audio presets.
  2. Disconnect the negative cable from the battery.
  3. From under the hood, disconnect the heater valve cable from the heater valve. Turn the heater valve arm to the fully opened position.
  4. When the engine is cool, drain the engine coolant from the radiator.
  5. Disconnect the inlet heater hose and the outlet heater hose from the heater core.
  6. Remove the mounting nut from the heater unit. Take care not to damage or bend the fuel lines, the brake lines, and related parts.
  7. Remove the dashboard.
  8. Remove the evaporator.
  9. Remove the mounting bolts and remove the heater unit. Front heater unit honda-10-00-4128.gif

  10. Remove the self-tapping screws and the clamp.
  11. Carefully pull out the heater core so you don't bend the inlet and outlet pipes.
Front heater core honda-10-00-4129.gif

To Install:
  1. Using care, install the heater core to the heater unit and secure.
  2. Using care, install the heater unit and tighten mounting nuts and bolts to 7 ft-lb (10 Nm).
  3. Install the evaporator.
  4. Install the dashboard.
  5. Connect the inlet heater hose and the outlet heater hose to the heater core.
  6. Connect the heater valve cable to the heater valve.
  7. Refill the cooling system with engine coolant.
  8. Adjust the heater valve cable.
  9. Make sure that there is no coolant leakage.
  10. Make sure that there is no air leakage.
  11. Connect the negative battery cable.
  12. Perform the power window control unit resetting procedure.
  13. Enter the anti-theft codes for the audio and the navigation system, and then enter the audio presets.
Rear To Remove:
NOTE: The rear blower motor, the rear heater core, the blower screen, the rear blower resistor (heating/air conditioning system) and the rear power transistor (climate control system), the rear air mix control motor (climate control system) , the rear mode control motor and the rear expansion valve can be replaced without removing the rear heater-A/C unit.
  1. Remove the self-tapping screws and the clamp, and then remove the bolts and the rear evaporator lines with the rear expansion valve. If necessary, remove the rear expansion valve. Use a second wrench to hold the other fitting on the valve so the rear evaporator lines won't twist. Leave the first fitting loosely connected so you can use it to hold the valve while you loosen the second fitting.
  2. Remove the rear heater hoses.
  3. If necessary, remove the rear blower motor, the rear heater core, the blower screen, the rear blower resistor (heating/air conditioning system), the rear power transistor (climate control system), the rear air mix control motor and the rear mode control motor.
  4. Remove the self-tapping screws and the lower housing.
  5. Remove the self-tapping screws, and carefully separate the left upper housing from the right upper housing. Remove the rear heater core.
Rear evaporator assembly honda-10-00-4116.gif

To Install:
  1. Replace the rear heater core.
  2. Attach the heater hoses.
  3. Make sure no air is leaking from the left upper housing and the right upper housing fitting and from the upper housings and the lower housing fitting.
  4. Before reassembly, make sure that the rear air mix control linkage and door move smoothly without binding.
  5. Before reassembly, make sure that the rear mode control linkage and door move smoothly without binding.
  6. Reassemble the housing.
  7. After reassembly, make sure the rear air mix control motor runs smoothly.
  8. After reassembly, make sure the rear mode control motor runs smoothly.
  9. Refill the cooling system and make sure that there is no coolant leakage.
prev.gif next.gif

Oct 16, 2010 | 2005 Honda Pilot

2 Answers

My husband needs to know if there is a fuse that could fail and make the rear air conditioner blow hot air.


no....This is the rear A/C & heater actuator blend door malf/broken. This is very common on expeditions and I encountered the same issue in my 2006 expy. This door switches from hot to cold vents, once stuck only hot air will blow. Also, is there any thumping or tapping noises from the right rear panel (this is where the rear a/c unit is)???

May 05, 2010 | 2003 Ford Expedition

1 Answer

2004 Yukon. driver side air conditioner not working


you need to change drivers side temp door actuator then disconnect battery for 5 seconds and reconnect after changing the part, turn key on for 60 seconds with touching heater control to allow actuator to program and then it will work.

Sep 19, 2009 | 2004 GMC Yukon

1 Answer

Air Conditioner Problem


the most common problem here is a defective air temperature control blend door actuator, this is what moves the door that controls air flow across the heater core or the ac evaporator core, to replace this requires u remove the dash assembly.

Aug 13, 2009 | 2005 GMC Yukon Xl Denali

1 Answer

Heater/Air blower not working.


check fuses. first then check controller before changing the blower.

Dec 24, 2008 | 2004 Nissan Maxima

Not finding what you are looking for?
1998 Mercury Villager Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...