Question about 1996 Pontiac Grand Am

1 Answer

Where is the oil presure sending unit in an 1996 pontiac grand am manual 2.4 liters 4 cylynders.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 6,826 Answers

Here's a copy of component locations for various engine sizes for the 1996 Pontiac Grand Am that I had on my online resource.where is the oil presure sending unit in an 1996 - prev.gif next.gif COMPONENT LOCATIONS The component locations shown are typical, and may vary slightly from one model year to another, because of variances in manufacturing and assembly. Fig. 2: 2.0L Engine Component Locations 91064gtt.gif
Fig. 3: 2.3L Engine Component Locations — 1988where is the oil presure sending unit in an 1996 - 91064gtu.gif91064gtu.gif
Fwhere is the oil presure sending unit in an 1996 - 91064gqa.gifEngine Component Locations — 1991–93 where is the oil presure sending unit in an 1996 - 91064gqb.gif
Fig. 5: 2.3L Engine Component Locations — 1994–95
Fig. 6: 2.5L Engine Component Locations 91064gtw.gif
Fig. 7: where is the oil presure sending unit in an 1996 - 91064gtz.gifComponent Locations 91064gty.gif
Fig. 8: 3.3L Engine Comwhere is the oil presure sending unit in an 1996 - next.gifocations 91064gtz.gif
prev.gif next.gif

Posted on Aug 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil sending unit on a 1991 Pontiac Grand Am 2.5 liter 4 cylinder automatic transmission


Hope the helps
The oil pressure sending unit can be in the block, or near the filter, the oil level sending unit if equipped is usually in the pan.

May 24, 2014 | Cars & Trucks

1 Answer

Firing order 1996 grand se 3.1


On 1996 Pontiac Grand AM 3.1 liter V-6 VIN "M"... Firing Order 1-2-3-4-5-6.

If you need this diagram or other information, countact us in the previous link.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Oct 31, 2011 | 1996 Pontiac Grand Am

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

2 Answers

Grand Am oil light was on, checked oil and added a quart. Oil light is still on despite the oil being at the proper level


oil pressure test needed, could be something as simple as a oil pressure sending unit, or, possible engine damage

Jul 20, 2010 | 1996 Pontiac Grand Prix

1 Answer

I need to change the oil pressure sensor, where is it found


The oil pressure sending unit is located to the right of the oil filter and just above the starter motor. This is on the 3.4 liter V6.
On the 2.4 liter 4 cylinder the switch is on the left (drivers) side of the cylinder head.

Feb 25, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Where is the oil pressure sending unit located on a 2000 jeep grand cherokee 4.0 liter


Removal & Installation
  1. Disconnect the negative cable from the battery.
  2. Raise vehicle on hoist.
  3. Remove front splash shield.
  4. Disconnect oil pressure sender connector (4).
  5. Remove the pressure sender (2).
6eaedba.gif
Oil pressure sending unit


To install:
  1. Install oil pressure sender.
  2. Connect oil pressure sender wire.
  3. Install front splash shield.
  4. Lower vehicle.
  5. Connect the negative battery cable.

Jan 12, 2010 | 2000 Jeep Grand Cherokee

2 Answers

How many quarts of transmission fluid does it hold


You didn't state what size engine you have.
The 2.2 engine----- 6.9 qts.
The 2.3 engine-----7.4 qts.
The 2.4 is 7.4 qts.
The 3.1 is 7.4 qts.
The 3.4 is 6.9 qts.
These are the capacities for refilling after being drained.

Nov 17, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Where is the Oil Pressure Sending Unit 96 Jeep Grand Cherokee 4L


the sensor is located right above the oil filter, careful they crack very easily...but are really easy to replace...

Dec 03, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Pontiac Grand Am Logo

625 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...