Question about Dodge Sprinter
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: belt diagram
start at power steering down to ac compressor to crank...around crank to belt adjuster....over fan pulley to alternator up from alt and over both idler pulleys....a 17mm 12point wrench will fit on adjuster to move it
Posted on Sep 25, 2008
Look on the top radiator cross member by the hood latch- the belt routing diagram should be there. If not, the same engine and accessory configuration was used on all Chrysler, Dodge, and Plymouth minivans through, at least, l999. If you can find any of those with the 3.3liter engine, the diagram should be located where I said. Good luck
Posted on Jul 18, 2008
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
Posted on Jul 18, 2008
Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
Posted on Nov 17, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Tips for a great answer:
May 18, 2016 | Dodge Cars & Trucks
Oct 08, 2011 | 2007 Dodge Nitro R/T New Cars
Aug 02, 2011 | Dodge Sprinter
Feb 06, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport
Oct 30, 2009 | Dodge Ram Pickup 3500 Cars & Trucks
Sep 21, 2009 | 2004 Dodge Sprinter
May 28, 2009 | 2007 Dodge Ram Truck
Jan 15, 2009 | 1999 Dodge Ram
786 people viewed this question
Usually answered in minutes!