Question about 1999 Daewoo Nubira

2 Answers

Missing on idle and turn off after one minute

Posted by on

  • rivera_edwin Sep 01, 2010

    car has 88321 miles, and 4cyl.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Daewoo Master
  • 17,970 Answers

Has you replaced the Camshaft sensors? Try turning your steering wheel 180 degrees and see if the engine idle increases. If it does not, then your Idle Air Control motor is weak. Also turn on and off your A/C system and see if the idle increases or not. With the A/C on, the idle should pick up. If not, then the idle air control motor is suspect. You may have an electronic Throttle Body which is a more complex idle air control motor.

Hope helps.

Posted on Sep 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

What size engine and how many miles on the car?

Posted on Aug 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could bad maf sensor and bad idle air valve have vehicle stall then hard to start for awhile and cuts off after 10 minutes of driving


I would also suspect the ignition module. They tend to work ok for a few minutes when they are cold, then fail once they warm up. If you wait awhile for the ICM to cool down, it will work as well as it can until it warms up again. A code scanner is your best friend to know where to start looking, and to perform tests and log data.

Feb 16, 2016 | 1997 GMC Yukon

1 Answer

Engine dies when idling seems like electrical problem. wait a couple of minutes with key off, starts right up.


re-tune the idle mixture setting
check for vacuum leaks at the auto transmission actuator , vent controls
raise the idle rpms to around 650

Nov 02, 2015 | Cars & Trucks

1 Answer

I was driving my 08 Chrysler Town & Country and I


The easiest and simple should be fixed first . Turn off everything in your vehicle, radio, ac. lights, windshield wipers etc. Put the car in park , turn off the key. Disconnect the battery, wait 5 minutes. Without turning anything on in the car reconnect the battery, leave the car in park and start the car. Allow the car to sit and idle for 10 minutes. This allows the cars computer to reset all gauges and sensors uninterupted. If everything remains off including interior lights etc. the computer will not miss any steps in resetting. This step will also reset your cars idle.

Dec 01, 2012 | Cars & Trucks

1 Answer

2003 sierra gauges not working plus dash plus drains my battery any suggestions ?


Try this simple trick. Shut off every thing in your vehicle, radio, ac, lights, windshield wipers etc.Turn off the vehicle put it in park. Disconnect your battery , wait 5 minutes. Then Without turning any thing on leaving the vehicle in park reconnect the battery start the vehicle and let it Idle for approx 10 minutes. This allows your computer to reset all of your gauges. By assuring that everything is off your computer can concentrate on resetting everything correctly without missing a step . This will set your Idle and all of your Gauges. Whenever your battery is disconnected for what ever reason this step should be followed immediately upon reconnect.

Nov 16, 2012 | 2000 GMC Sierra

1 Answer

1993 Mitsubishi v6 Verada missing at idle.


Please about the diagnosis and repair of engine misfires here.

Oct 16, 2012 | Mitsubishi Cars & Trucks

1 Answer

Checked tps it is working on stem ok but


TURN OFF RADIO FIRST.REMOVE NEGATIVE BATTERY CABLE FOR A MINUTE OR TWO.RECONNECT NEGATIVE BATTERY.CRANK CAR UP LET IDLE TO GET OPERATING TEMPERATURE FIRST DONT ACCELERATE ENGINE.GIVE ENGINE TIME TO RECOGNIZE THE NEW TPS SENSOR.IF CAR STILL MISS REPLACE FUEL FILTER.CLEAN FUEL INJECTORS WITH A BOTTLE OF FUEL INJECTOR CLEANER BY POURING IT IN A FULL TANK OF GAS.DRIVE CAR AROUND SO CLEANER CAN FLUSH OUT THE INJECTORS.

May 15, 2010 | 1993 Buick Regal

1 Answer

Engine is missing after putting it on rev limenter at 3,800. 2.4 leter. 4 cyl. now it won't clear up its like on 2 or3 cyl.


FIRST TURN OFF RADIO.REMOVE NEGATIVE BATTERY CABLE FOR 2 MINUTES.THEN PUT NEGATIVE BATTERY CABLE BACK ON.CRANK CAR UP LET IDLE UNTIL WARMS UP DONT ACCELERATE LET PCM RECOGNIZE THE TPS.IF CAR STILL MISSES YOUR TPS SENSOR BAD.OR THE DEALERSHIP HAS TO CHECK IT OUT.

Apr 20, 2010 | 1999 Oldsmobile Alero

2 Answers

The cooling fan does not come on , but will come on with a/c


I believe the fan should only come one when the engine is getting hot. not at idle

Feb 23, 2010 | 1997 Chevrolet Cavalier

2 Answers

1999 Honda Odessey P1259 VTEC System Circuit Fault (Bank 1)


I would first try and reset the Powertrain Control Module since you replaced the alternator. This will clear all the codes and turn off the check engine light. To do this, pull the No. 13 "clock backup" fuse from the passenger kick panel fuse box for 10 seconds then replace.

Now, you should also do the Honda "idle learn procedure". This lets the computer calculate what a no load idle condition is so it can adjust idle speed when the engine or alternator is put under various loads. To do this, make sure all electrical items are turned off. Start the engine and hold it at 3,000 rpm in park or neutral until the radiator fan comes on or until normal operating temp is reached (about 4 minutes). Now let the engine idle for a minimum of 5 minutes with no loads. If the radiator fan comes on during the 5 minutes, the amount of time it runs must be added to the 5 minute period--the goal being a period of at least 5 minutes without any loads on the engine or alternator.

Also check the vacuum line to the evap solenoid. It is on the top of the engine near the intake throttle body.

Jul 27, 2009 | 1998 Honda Odyssey

1 Answer

1990 Ford f250 Diesel dies at idle.


could be bad glow plugs or plug heaters, faulty wiring to the coil, vacuum leak.

Jan 29, 2009 | 1986 Ford F 250

Not finding what you are looking for?
1999 Daewoo Nubira Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...