Question about 1991 Chevrolet C1500

Open Question

How can I fix steering wheel play on my 91 chevy c1500? When I turn the steering wheel moves up it has slot of play how cam I fix it and when I put it in park I have to move the steering wheel up!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 2006 chevy equinox lt can't get

their is a service adsvisory and a warrantee fix. A number of key switches were faulty. A new one will solve the problem

Posted on Aug 11, 2008

Ad
  • 1 Answer

SOURCE: Steering wheel locked.. can't move key ...

I had the same problem , I tried all sorts of jiggling didn't work , a mate came over and rocked the steering wheel left to right, while trying to turn the key ( But) while trying to turn the key, keep pulling the key out of the lock by small increments . This worked for us . when it happened to ours it was like the key was going in too far . Hope that helps . Kev

Posted on Mar 10, 2009

  • 118 Answers

SOURCE: My Ford Taurus won't start.

Try putting it in neutral to start it.

Posted on Jul 21, 2009

harley9701ha
  • 424 Answers

SOURCE: The gear shift is stuck in park. The wheel moves

Make sure you have brake lamps. The shift interlock solenoid is powered by the brake lamp switch.

Posted on Nov 16, 2009

BCAS1298
  • 3092 Answers

SOURCE: The steering wheel won't lock

You have some sticking pins in the lock cylinder GM is know for this, so the key won't turn, you can try spraying some Graphite not WD-40 and work your key might looesen up, if not call a mobile lock smith to repair the pins in your lock cylinder.

Posted on Jan 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I take out the slack of right and left of my steering wheel on a 1991 chevy truck?


Google states: Hold the ateering shaft at the steering box with a wrench or channel locks, have someone get in and turn the wheel. If the wheel turns and the shaft doesn't, then your problem (or at least part of it) is in the shaft between the wheel and the box. If the wheel does not turn then hold the steering box output shaft and do the same thing. If the wheel turns and the arm does not then you have play in the box. This should be adjustable. If there is no play in the box then check the tie rods and ball joints.




Td

Oct 01, 2012 | 1991 Chevrolet C1500

1 Answer

1998 chevy truck power steering problems


z71 steering is stiff only when turn show right or left 1998

May 30, 2012 | 1998 Chevrolet C1500

1 Answer

Sterring colum is very loose on my chevy s 10 blazer overall steering feels good just steering wheel is loose


LOOk on the top of the steering box in the middle there is a stud with a nut threaded onto it this is the adjustmemt for steering wheel play . Loosen the nut and take a stright head screw driver put it in the slot in the stud and turn it in . rembember you should have an inch or so free play in the steering wheel this will tighten it up then tighten the nut back down

Feb 15, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

My 89 chevys tilt steering moves up and down and will not lock in place how do i fix this.


There are broken parts in the wheel. It takes special tools to remove the steering wheel. Some auto parts stores will rent or loan the tools if you buy the parts from them.

Jan 16, 2011 | 1989 Chevrolet C1500

1 Answer

How do i replace the key and tumbler on a 91 chevy 1500?


You need to go to the part store and buy a special tool that compresses the spring inside the steering column. Don't cut corners, Disconnect the truck's battery. Without the tool you will not get the column back together. With the tool you will compress the spring, remove the clip above that dust shield. and then start to pull it apart. Remember to put everything back together how it was. That dust-cover looking thing must go back exactly how you found it or you will damage the plastic pieces to the horn circuit. When you pull the cover off for the horn be careful with the wire. Push and turn counterclockwise to remove. And you will pull out the directional lever and unscrew the little Phillips head screw from the hazard button so the turn signal Assembly can be moved so you can access the screw that locks the key cylinder in place.

May 21, 2010 | 1991 Chevrolet C1500

3 Answers

There's too much play in the steering wheel of my 94 chevy silverado. How do I fix it?


play in the steering wheel for that truck is more than likely caused by worn tie rod ends, and sometimes ball joints. The steering box is least likely to give you problems, unless it had bolts come loose. Check out the tie rod ends first; with the vehicle off, have someone else turn the steering wheel from left to right within that free zone, and look at the joints in the steering linkage. If you see one half of the joint moving more than the other half, you know it need replaced. If you have more questions, or if you need more help, feel free to post a comment, and I'll check up on it so you aren't left hanging.

May 12, 2010 | 1994 Chevrolet C1500

1 Answer

While driving down the road my 88 chevy 1500 wants to swerve to the left and then to the right. I had the wheels balanced, and have put new shocks on the front. Any ideas?


Check ball joints and tie rod ends for play. Jack the truck up on the frame and try to move the wheel up and down for ball joints and side ti side for tie rod ends. Also make sure you check the idler arm on passenger side and pitman arm on steering box. None of the parts should any play whatsoever. If there is any play in them when you try to move them then replace them.
There could also be excessive play in the steering box but that shouldn't make it swerve back and forth. That would just let it wander to one side or the other until you corrected it by turning the wheel. Hope this helps.

Mar 05, 2010 | 1988 Chevrolet C1500

2 Answers

I have a 96 chevy c1500 5.7 distributor problem


after installing distributor a camshaft offset check must be performed.this requires a scan tool.start engine with scan tool attached to diagnostic connector under dash,go to cam offset,it should show a value of 0 to -2 or +2.to adjust cam offset shut off engine,loosen dist. hold-down bolt,which should be 13mm bolt head.move dist slightly,start engine and rev to 1200 rpm and check scan tool to see updated cam offset value

Jul 18, 2009 | 1996 Chevrolet C1500

Not finding what you are looking for?
1991 Chevrolet C1500 Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...