Question about Toyota Tercel

1 Answer

Have a 1995 toyota tercel. need to change two fuel lines from the sending unit to just under the fuel tank. can this be done without dropping the tank which seems like more work than what the car is worth

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 274 Answers

If you have to drop tank,then you have to drop it,make sure tank is empty,drain it completley,use a floor jack and a piece of plywood to help support it while lowering it down.becareful when doing this.

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the fuel gauge


There is no specific Fuse for the Gauge Itself. There is a Fuse for the Fuel Pump and one for the Instrument Cluster.

If your Gauge is not working... 95% sure that your Float in the Tank or the Sending Unit has gone bad on your car..

Apr 08, 2013 | 1995 Toyota Tercel

1 Answer

GAS RUNS DOWN FUEL LINES FROM TOP OF GAS TANK


sounds like sending unit gasket is leaking. drop the gas tank...sorry

Aug 20, 2012 | 1995 Buick LeSabre

3 Answers

Is there an access panel under the rear seat for replacing the fuel sending unit or the fuel pump in a 1995 Olds 88 Royale? I hope I don't have to drop the damned gas tank!


no access panel, that would be sooo easy. you'll have to drop the gas tank to replace the sending unit and i don't know how much research you've done,but i've never been able to buy just the sending unit by itself. i've had to buy the whole fuel pump.the more fuel thats in the tank,the heavier it's gonna be. have a jack handy,have a helper handy,and use jack stands! you sure don't want the car to fall on you.the main filler hose will have to come off and there is a return line hose that has to come off also.the fuel pump plugs into the tank on the top of tank,be careful dropping that tank,let it down easy! you can cause an electrical problem if you let those wires stretch. been there, done that. drain the gas out of the tank once you get it down,it'll be easier to reinstall and lighter,easier to put back into place. hope this helps,and good luck. thank you for choosing fixya.com

Jan 10, 2011 | 1995 Oldsmobile 88

1 Answer

I want to change the fuel pump on a 1995 pontiac sunfire , what are the steps


first drain the tank, with the car jacked and a stand under the tank remove the two straps, lower the tank slowly not enough to pull on the lines, remove the fuel lines and disconnect harness, clean around the sending unit , with a hammer and soft drift remove the ring that holds the sending unit in, remove the unit carefully careful not to bend the float arm, replace the pump and reinstall in reverse order use new screen and o ring

May 10, 2010 | 1995 Pontiac Sunfire

1 Answer

I need to know how to change the fuel pump in a 1995 toyota camry.


some toyotas have the fule pump in the gas tank if it dus you need to remove the tank and the sending unit it ths raund thing on top of the tank the pump is in side you can remove the ring with a flat screw drive and a hamer. have fun

May 19, 2009 | 1995 Toyota Camry

1 Answer

Fuel pump needs replacing. Where is it located and how should I go about it?


Like pretty much all modern fuel injected cars, your fuel pump is in the fuel tank. Many cars require removing the fuel tank from the car, but a quick search suggests there is an access panel under the rear seat that might allow fuel pump replacement with the tank still in the car.

May 09, 2009 | 1995 Toyota Tercel

1 Answer

1998 dodge stratus fuel pump


Hello
If you have done a in tank one before this will go easy
drop the tank
remove the fuel lines
remove the electronic connector.
remove the ring from the tank that holds the sending / fuel pump unit into the tank.
replace the pump on the sending unit,
reverse steps to install
RD

Jan 12, 2009 | 1998 Dodge Stratus

2 Answers

1988 Toyota tercel HTBG 1500cc wont idle


Suggest that you read the entries posted under cars/t594234-toyota_lacks_power at this fixya website. 87-90 Toyota Tercels have significant carburetor problems.

Dec 11, 2008 | 1987 Toyota Tercel Liftback

1 Answer

Need to determine where the fuel filter is located. Also, how to get to and possibly replace the fuel pump.


To remove the fuel pump, you need to either drop the fuel tank or remove the bed. The pump is in the fuel tank. Personally, I remove the bed, it is easier than dropping the tank, and, more often than not, the tank bolts breal off, or you damage the metal lines on the sending unit. Fuel filter? I NEVER change them unless the fuel is contaminated. It is in the engine compartment; down low. Note that if you DO change the filter, be prepared to replace your fuel lines. The filter metal and the line metal are slightly dis-similar, and "galding" is always possible. That being said, if you take the filter off of the line, 99 times out of 100 the threads on the line will stay on the filter. Not good.

Aug 08, 2008 | 1995 Toyota Tacoma

1 Answer

No power to fuel pump. Power up to open circuit relay.


No power to the fuel pump is a common issue with Toyota Trucks. More than likely, the power wire at the top of the fuel tank sending unit is rusted off. If this is the case, you either need to drop the tank, or remove the bed to replace the sending unit assembly. I have done it both ways, but have found that removing the bed is easier than dropping the tank.

Jul 29, 2008 | 1995 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...