Question about 2002 Volkswagen Cabrio

1 Answer

The other day I had a problem with the blinkers not working.So checked all the relays & found the right one ,cleaned it & blinkers worked.Now this morning I was out stopped & went stopped again & car wouldnt start. So waited about 5 minutes & started right up. Got home for about 1/2 hour or so went again no problem. Stopped to visit about 45 minutes and when Iwent to leave wouldn't start again. Now severalhours later car is sitting at brothers house. 2002 cabrio. Bought it 2 years ago & only problem I had wad battery now this. ANy suggestions? The dealer is very, very costly.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check the crancksheft position censor or the cumsheft censor if you don't have any of thouse change ur distributor completetly

Posted on Sep 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers and hazards dont work


check the flasher relay under the dash

Mar 02, 2014 | 1996 Mercury Sable

1 Answer

Turn signals work some day's not others. 15 amp fuse looks to be good


There is a blinker relay that controls this.Have to locate blinker relay in fuse panel and replace.

Feb 16, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Have a 1999 bounder 34j on a ford f53 chassis with a v10. turn signals and emergency flashers quit but wipers still work. checked and tested all fuses and relays. 2 20 amp,2 15 amp,1 60 amp outside and 2 5...


flasher and blinkers look like a small silver cylinder, maybe an inch or so in diameter. they are usually in the fuse box or somewhere in the dash. (in my 93 mustang the flasher is almost in the middle of the dash instead of driver side while the blinker part is inside the fuse box. now this is just the ones i've seen, yours SHOULD be the same, but i'm not positive. you said you found something with 3 wire plug in? that sounds like it may be it, but look for the cylinder like things first

Aug 11, 2010 | Ford F-450 Cars & Trucks

1 Answer

Blinkers don't work: When I use my blinkers to


The right blinker issue sounds like you have one bulb out either front or rear check them both. The left blinker issue sounds like either bulbs(both out) or fuse, or worst case blinker switch has gone bad on left turn only so not picking up the signal.

Mar 18, 2010 | BMW 525 Cars & Trucks

1 Answer

LEFT REAR STOP LIGHT NOT WORKING FORD SPOR TTRACKER 2001


You may have to trace the wire from the blinker back . I am betting it is a cut wire in between the switch and the light. You can use a test light to go back tracing the wire until it light up. Your problem is right there. it could have been pinched and the current was cut off.

Dec 29, 2009 | 2001 Ford Explorer Sport Trac

1 Answer

1997 GMC Sierra p/u. Brake light & blinker out. Taillights ok.


I have notice that this is a common problem. The socket most of the time goes bad, I don't know why but they just do. You can pick them up at any parts store for around 5.00 each. If you don't have a volt meter and ground straps to test it right, then I would try changing the sockets out. Quick and easy. Let us know how it goes.

Aug 30, 2009 | 1997 GMC Jimmy

1 Answer

Blinkers, fog lamps, heater/defroster, heated seats not working


you may have aflaulty ground on your vehicle, check for good chassis and engine ground, replace relays and fuses as nessesery

Jul 21, 2009 | 2000 Audi A4

1 Answer

Need location signal flaher and front lighter fuse,;2002 explorer


check fuse #21 first. 5 amp.

flasher relay in fuse panel on dash


May 21, 2009 | 1998 Ford Explorer

2 Answers

Saturn 2002 VUE Turn Signal not working properly.


You need to check your left side turn/park lamp bulbs for correct part # & installation.If that checks out you deffinetely have a ground problem.When you have other lights blinking with you turn signals you have either a bulb incorrect or a bad/poor ground.If bulbs check out check your forward lamp harness ground.Hope this helps

May 15, 2009 | 2002 Saturn VUE

1 Answer

When lights are on right blinker doesn't work


that could be a bad bolb or light socket . some time the bolb can be bad and still work. have a nice day.

Mar 23, 2009 | 1983 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2002 Volkswagen Cabrio Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...