Question about 1993 Buick Century

1 Answer

How do you change the front brakes? - 1993 Buick Century

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 215 Answers

The front brakes should be Disc, if it is you will need to remove the Caliper bolts, the upper and lower, and the Caliper will pull away from the rotor, depress the cylinder and the old brake pads will just pop out, replace the pads and postion the Caliper back on the rotor and tighten the upper and lower bolts, it is a very simple job.

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake pedal goes to the floor only when engine is running.


Hi Alicia,how is your brake fluid?Usually just changing front brake shoes requires no bleeding since the brake line was not open,how were your brakes before you changed the pads,if fluid is low,maybe back wheel cylinders are leaking.Front calibers could be bad,or even master cylinder,need more info.

Feb 03, 2013 | 1999 Dodge Caravan

1 Answer

Brakes not engaging


sounds like there is getting no brake fulid to the line check the brake line open the top part of the brake line and see if fluid comes and if it does then good then open the side from the wheel and if it doesnt then ist clogged and u need a new brake lin e

Feb 03, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

Change front rotors on 97aurora


I hope you mean change front rotors, AND change front disc pads...This front brake set-up is fairly easy for a novice to do also. Why mention rotors? Are you experiencing a vaibration when applying the brake pedal? Yes, this is a sign of warped, worn out rotors...also inspect caliper piston movement, and top off brake reservoir after parts change. The caliper hold down bracket must be removed to change the rotors...2 bolts with good breaker bar, maybe 16 17mm socket and 13mm socket for removal of the caliper (2) bolts...lubricate and clean all parts and slide pins...be sure to thoroughly spray new rotors with brake parts cleaner before installing...this removes the packing oil from the rotors...(will ruin new brake pads and smell) Hope this helps.

Jan 21, 2013 | 1997 Oldsmobile Aurora

1 Answer

Need to bleed my front brakes


if you change your brake and rotor you don't have to bleed your brake

Sep 22, 2012 | 1991 Ford LTD Crown Victoria

1 Answer

I have a F150 p/u 2000 for 10yrs. Each year I change the brake pads. But the rear pads still looks like new. The front pads are worn down. What can be causing the problem?


normally, you replace the rear brake pads every other change in the front brake pads. for your case, it seems that the front brakes are the only ones working.

bleed your brakes to check if rear brakes are still working. after bleeding, check your brake master if it puts pressure equally to the 4 brakes.

Aug 05, 2011 | Ford F-150 Cars & Trucks

3 Answers

Brake pedal travel long-slow to stop.


check your front brake pads and see if they need replaced then check your brake fluid after you change them. If you add brake fluid first you will leak brake fluid out when you compress the calipers to change the front brake pads. In the end make sure your brake master cylinder is full of dot 3 brake fluid before you drive.

Dec 11, 2010 | 1996 Ford Taurus

1 Answer

My 2004 LeSabre shakes bad when I brake at around 50 mph. I changed the front brake pads. How difficult is it to change the front rotors?


Actually, changing the front rotors is not that difficult and they are relatively in-expensive. Anytime you change the pads on the front of your vehicle i would recommend having the rotors resurfaced or replaced. Especially if you are getting a brake pedal pulse when applying the brakes. Here is a step by step guide that will help you in removing your Front rotors.

Nov 03, 2010 | 2004 Buick LeSabre

1 Answer

My toyota 2001 rav 4 makes rubbing sound only when i step on the brakes, thought it was the front brake early indicator, so changed front brakes..they needed it! But still makes the noise..sounds like it's...


Yes, this will be the rear brakes. Most of these are the same design as the front and are as easy to replace. You should always change all the front and back brakes at the same time, as it will affect braking and handling.

Change rear brakes and your problem will be resolved.

Chip

May 31, 2010 | 2001 Toyota RAV4

3 Answers

My car front end wobbles when braking and at higher speed


did you have the front brake rotors machined, they are warped. either replace the brake rotors or have then machined, I prefer just replacing them as they are fairly cheap.

May 04, 2010 | 2004 Chevrolet Cavalier

1 Answer

I have a 2005 chevy silverado with drum rear brakes and it seems like i'm only useing my front brakes even though i adjust them it seems like they won't stay to wear i feel it in the brake pedal.....also...


The rear brakes normally only account for about 25% of your braking power. Due to engine weight being over the front wheels, and the way that the front settles down when braking, it's proportioned that way to get the best braking performance, especially in a pickup. Unless you change the proportioning valve, the amount of braking that the rear wheels do will not change. As for the brake dust, some types of pads do that more than others, and with disk brakes, this is normal.

Mar 31, 2010 | 2005 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
1993 Buick Century Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...