Question about 2007 Mitsubishi Raider LS

1 Answer

Where are the spark plugs found, i need a schematic on the engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

I am going to assume this is a 6 cylinder and the plugs on the backside are the problem. You will have to remove the Air intake and intake manifold to get to the back plugs if this is the case. In the event this is a 4 cylinder and you can't see where the plug wires lead to on the head due to a cover of some type you will need to remove the cover. These plugs are probably deep set if it is a 4 cylinder. The best manual I can recommend for the proper dis-assembly of this area is either the Haynes repair manual on the vehicle or the Chilton's Manual. Both are available at major auto parts stores. Now, all of this assumes this particular model did not use independent coils on each plug like ford does. These are actually bolted on top of the plugs themselves and you may only see a wiring connector going to them. Typically they are about 3 inches in Diameter. And should be pretty obvious. I highly recommend you get one of the manuals before you attempt this procedure if you have a 6 cylinder mounted sideways since the cost of this Intake manifold, if it has to be removed is about $400 and if removed wrong will break.

Posted on Aug 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spark plug gap


How to Gap a Spark Plug - YouTube

? 2:57
https://www.youtube.com/watch?v=IuW3svdqKZM
Oct 15, 2012 - Uploaded by ChrisFix
How to correctly gap a spark plug. This is a fast and easy video on how to gap a spark plug and spark plug gap ...

FAQ: Find My Engine Spark Plug & Gap ' Briggs & Stratton

www.briggsandstratton.com/.../identifying-the-correct-s...

Briggs & StrattonFollow this step-by-step image guide to locate spark plugs in different Briggs & Stratton engine types. ... Spark Plug Type & Gap Chart for Briggs & Stratton Engines. Now that you've found the part you'd like to replace, you can use the chart below to identify the genuine Briggs & ...

Spark Plug Gap - AutoZone



Dec 15, 2015 | Cars & Trucks

1 Answer

Spark plug gap for 503 Rotex


Hi Faye,

I found this,





Rotax spark plug advisory for ultralight, experimental lightsport, amateur built aircraft.




Rotax 2 stroke aircraft engine spark plugsThe recommended spark plugs for the Rotax 277, Rotax 377, Rotax 447, Rotax 503, Rotax 532, Rotax 582 are the NGK B8ES series or the NGK BR8ES ( the R in the spark plug denotes it is a resistor plug and should be used in all of the CDI ignition engines.



BUT the Bosch points ignition engines should NOT use both a resistor plug and a resistor spark plug cap - use one or the other.

The least expensive option in the long run is the cap as you purchase it once while the resistor plugs cost more than the standard plug each time you buy them.



Ad Code TwoHere




Use spark plugs that have a SOLID TIP - DO NOT USE spark plugs that have an aluminum screw on tip. They vibrate loose, the tip wears making a loose cap to plug fit, and can lead to the spark plug arcking across from the cap to the plug. Also the screw on style spark plugs are NOT designed for our applications, the gap is generally set up for .030 to .035 thou. The solid tip spark plugs are set up for a gap of .015 to .020 thou.

Spark plug gap



  • Allowable range: 0.4-0.5mm / .015 -.020"


  • Optimal: I usually set them to .015 and let them wear out to .019


  • This also helps getting the engine started in colder conditions


This was found at

Oct 10, 2014 | Cars & Trucks

1 Answer

Free wiring schematics


go to the library they will have a book for your truck that will show you the plug wire location for the distributor and distributor rotation and firing order and cylinder position on the engine. is this is all you need.

Sep 04, 2014 | Cars & Trucks

2 Answers

No spark the engine


how do you know its no spark..

Dec 22, 2013 | 1991 Pontiac Firebird

2 Answers

Will start but wont run


get a spark tester ,this is only a basic test .check the coil for a spark if found remove the lead from the spark plug. plug in the tester. turn the engine over to test for a spark each time. if no spark found check and clean the contacts in your distributor cap and rotor arm then refit test for a spark. at the lead to the spark plug .if found now remove your plugs one at a time .smell for fuel .if found change the plugs.

Dec 21, 2013 | 1998 GMC Sierra

2 Answers

Vacuum lines diagram 351m


Click over diagram for zoom...

zjlimited_1008.jpg

Fig. 6: Vacuum schematic - 351M engine





zjlimited_1007.jpg

Fig. 7: Vacuum schematic - 351M engine


Hope this helps (remember to rate and comment this answer).

Apr 12, 2011 | 1981 Ford F 150

1 Answer

I need a diagram/schematic of the location for the knock sensor for a 1997 nissan altima where can that be found?


never replace a knock sensor. It only retards the spark to prevent spark knock - rarely. It is buried in teh engine and is $600 to replace.
You may have a broken engine mount casuing the sensor to set a code.

Sep 24, 2010 | Nissan Altima Cars & Trucks

1 Answer

Spark plug schematics


Look in your owners manual and if its not their. Go buy a service manual. Hope this helps!?

Please rate solution - Thanks

May 17, 2010 | 2000 GMC Savana

2 Answers

94 toyota tercel with no spark


Does it got a distribiter or does is it have a coil pack.I'm thinking an distribiter with 4 spark plug tirminals,I would look into the Ignition Control Module if it has one.I looked at a parts listing for the car and it shows it has one but looked at a Typical Ignition System Schematic and it doesn't show the igniton control module in there.But i would think it is needed to control the spark.I would look into it and see if there is one,if there is i would test it that would be my guess of what's causing no spark.I got a pic of the ignition control module and theTypical Ignition System Schematic for you.

Hope it helps




6h1281.jpgIgnition Control Module




graphic.aspx?mod=reptiff&module_id=1&session_id=%7b5c99313e-132f-495e-97aa-54ddd1158904%7d&image_guid=94i44402&print_bw=0&





































Feb 01, 2009 | 1994 Toyota Tercel

Not finding what you are looking for?
2007 Mitsubishi Raider LS Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...