Question about 1993 Chevrolet Suburban

1 Answer

Have a 93 suburban when i put it into 4 wheel drive it works for a few minutes and then blows the fuse what could cause that?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I would check the ground and power wires for breaks from the plug on the transfer case too the fuse box and if not from your button shifter if u have one

Posted on Sep 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevrolet suburban LT 1500 LT won't disengage from four-wheel-drive


Chevrolet Suburban Questions - 4 wheel drive does not ...

www.cargurus.com > Questions > Chevrolet > Suburban

CarGurus4 wheel drive does not work - When I put the Sub in 4 wheel drive, low of high, ...Asked by Robert_Holland_073 Dec 17, 2009 at 04:06 AM about the 1994 Chevrolet Suburban K1500 4WD ... it can seize up and then the trans case may ingage but the hubs won't be locked in so it ... 1999 Chevrolet Suburban K2500 LT 4WD.

Chevrolet Tahoe Suburban 4 Wheel Drive Indicator Lights - Car ...

forums.edmunds.com > Chevrolet > Chevrolet Suburban

Oct 2, 2007 - 31 posts - ‎19 authors
My 1999 Tahoe (odo reading 137,400 miles) won't go into 4 wheel drive. .... I have a 98 suburban 1500 4x4 LT 5.7 L with 165,000 miles ... I recall once forgetting todisengage 4WD and I could feel a terrific binding when I ...
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC ...? 21:32https://www.youtube.com/watch?v=Su9Dkrfd_ZgJan 20, 2014 - Uploaded by rwdellingStep by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck. rwdelling .... Mine is acting like it is NOT pulling with the fronts,won't engage. ... Have you ever adjusted or the shift cable on your 1500 Chevy ... GM 246 transfer case, 2000 Chev Suburban- Duration: 20:09. by spelunkerd 286,045 views.GM Troubleshooting Part 13 - 4WD vacuum actuator & cable ...? 5:11https://www.youtube.com/watch?v=CbEF6PyJdU0Feb 3, 2011 - Uploaded by mr diyguy123I tacked on this video about the 4wd sys. ... I have a 1994 ChevyS10 ... My S10 won't let you go to 4 LO when your in gear. ... the front end to keep them disengaged. when you put it in 4wd, the vacuum actuator pushes a gear ...

Dec 25, 2015 | Chevrolet Cars & Trucks

1 Answer

My 4wheel drive doesnt work? What can I do or look at to fix?


4 wheel drive does not work - CarGurus

www.cargurus.com > Questions > Chevrolet > Suburban

CarGurusDec 17, 2009 - 4 wheel drive does not work - When I put the Sub in 4 wheel drive, low of high ... I want to "add" 4 wheel drive to my 95 1500 suburban w/ a 350.

My 4 wheel drive stopped working - CarGurus

www.cargurus.com > Questions > GMC > Sierra 2500

CarGurusJul 15, 2014 - My 4 wheel drive stopped working - After struggling with the 4 wheel drive ... sometimes in low sometimes in high, now it doesn't engage at all.

4WD not engaging all the time. - CarGurus


Dec 05, 2015 | Cars & Trucks

1 Answer

My ac quit working (won't even blow), windows won't go up or down and radio wont work only will eject


Hi Kolya, Check around for a loose or broken cable especially around the battery connections. Regards John

Apr 23, 2012 | 1995 Chevrolet Suburban

1 Answer

My 4x4 fuse keeps blowing. I put in a new one, shift into 4 wheel drive and it blows. Is it a short or could my 4 wheel drive be out. It is a 1994 chevy suburan.


Try this,on the front axle there is an actuator for the 4x4,unplug it and try to engage 4x4 with it unplugged,if the fuse doesn't blow,actuator is bad.
Also look at the wires going to the actuator they get damaged from brush and things.

Feb 09, 2011 | 1994 Chevrolet Suburban

1 Answer

I have a 93 sub with 4 wheel drive. front drive shaft truns all


Yes the front wheels will spin the front shaft but the shaft is not engaged until 4 wheel drive is engaged.

Lone99star

Jan 05, 2010 | 1993 Chevrolet Suburban

2 Answers

2000 blazer 4 wheel drive problem


It's most likely the "four wheel drive actuator" This is located on the front differential housing. It's cylindrical shaped and has a large hex (about
1-1/4") and two wires coming out of it. Usually they short out and blow the fuse but, I've also seen where they just quit working and sometimes they just get slow to work. The "actuator" has a heating element in it and it warms up, some sort gas, causing it to expand thus engaging the front wheels. In cold weather it may take a minute or so for it to engage, so put in four wheel drive and wait for a bit and see what happens.

Jan 05, 2010 | 2000 Chevrolet Blazer

1 Answer

My transfer case fuse keeps on blowing cant find out why 1999 gmc suburban


Check the four wheel drive actuator on the front axel. It's on the front right side of the front differential housing. It's round with a big hex on it where you would put a wrench, I think it's 1-1/4". Anyway, follow the wires there's a plug about 6 inches away, unhook the wires going to the actuator. Now see if it still blows the fuse, if the fuse don't blow the actuator is the problem. It just scerws out and the new one screws in and hook up the wires. This is a fairly common problem with those trucks. On the early K series GM had the four wheel drive and the heater fan on the same circuit. The actuator would go bad and blow the fuse so now your stuck in the snow with no heat. I think GM changed that in the later years.

Dec 30, 2009 | 1999 GMC Suburban

1 Answer

Airbag light goes on and stays on, where is the fuse for the airbags in a 2000 chevy suburban?


doubt very seriously that it is a fuse problem.....does the horn blow steady as you turn the wheel.... they have a problem with the the rotary contact assy. being intyermittent... sometimes the horn has drop outs when turning wheel... also the air bag diagnostic module looses contact with the driver airbag... causing light to turn on..need to scan before you put much money in.. but fuse not the problem

Aug 31, 2009 | 2000 Chevrolet Suburban

2 Answers

I am having several problems with my 93 Grand Cherokee Laredo 4 wheel all the time. First, every time I drive, it seems like it slips out of 4 wheel drive high into neutral, then we have to come to a stop...


On your first problem, I would say the transfer case is gonna need some work if not totally rebuilt. You may try checking the fluid in the transfer case to start with. If it is low, the transfer case could be overheating and causing it to jump out of gear. I would say the damage is already done though. On your second problem, check the sensor in your washer fluid resevior, it has probably gone bad. As for the display not working all the time it is probably going out. The driver information display on the grand cherokees is notoriuos for going bad as they age. After 16 years it is probably going to need to be replaced and they are not cheap. Try a salvage or junk yard first. I also have a 93 Grand Cherokee and I have had to replace the instrument cluster. My speedometer stopped working and then the cluster began blowing the fuse over and over. I went to a salvage yard and found one for 25 bucks. Unfortunately, there are no easy solutions to the problems your are having. Good luck to ya. Hopefully you get everything situated. Jeeps are great vehicles to own and they will stand the test of time with the proper maintenance and and a little TLC.

Jul 12, 2009 | 1993 Jeep Grand Cherokee

1 Answer

1999 BRAVADA SMARTRAC BLOWS FUSES


chances are the the solenoid that controls the 4- wheel drive is either faulty and causing a short or the wire harness leading to it has a short. the solenoid is a dealer only itm and should be checked by a certified mechanic.. please rate this

Dec 04, 2008 | 1999 Oldsmobile Bravada

Not finding what you are looking for?
1993 Chevrolet Suburban Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...