Question about 2006 Chevrolet Trailblazer

1 Answer

I drop a soda on the power switch for my window on the driver side, now the switch does not work, what do i need to replace the switch. please advice.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 22,326 Answers

Baking soda or washing soda?? if you mean a drink like coke then its a new switch ,that stuff really cleans and dissolves ,see what it does to an old coin ,now as for pulling the switch out you will have to look carefully as most switches of this type just prise up and out ,but some are screwed to the panel from underneath so have a play ,sorry i cant help anymore as i have no product knowledge of this vehicle

Posted on Aug 28, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Odyssey power window switch

You will need to start with removing the drivers side interior door panel. You will need a test-light and check for power and ground at both the suspected switch and the window motor. At the switch, test for power and ground going into the switch. Then test he other side for power and ground going out. Test for power and ground at the power window motor too.Please write back with what you have found and write back, good luck.

Mar 08, 2014 | Cars & Trucks

1 Answer

Hi I got a 2006 2.7 chrysler sebring 4door no convertible n my driver side window sometime goes down n sumtimes it Dont work what can I do n I need a cheep water reservoir

you can find a cheap water reservoir by going to and do a search for "2006 sebring water reserver" and click on shopping. Your winidow are working intermitten, is due to a faulty switch, or dirty switch, sticky switch, (all mine get soda and chips spilled aound mine and ive had to replace twice already lol ) or loose connections at switch or window actuator, or faulty widow motor.

Dec 13, 2013 | Cars & Trucks

1 Answer

Passenger window switch works but the drivers side switch does not

was regulator bad? did it work from drivers side switch before you did regulator repair?..if so passenger side switch wiring has issue and is not sending signal through it back to the drivers side master switches.. otherwise you need to pin test for power up power down on drivers side switch and repair that if issue going to the window on passenger side.. (possible pinched at door jam area common)

Nov 20, 2013 | 2002 Hyundai Accent

1 Answer

Passenger side window does not work from either the drivers side switch or the passengers side switch.I have replaced the window motor.

Did you check to see if you had power and ground to the window motor before you replaced it? A faulty master switch (driver door) will cut power and/or ground from BOTH switches.

Also, a common fault is the wires get broken in the umbilical between the driver door and the body. If the driver window works OK, then either the TAN or the LIGHT BLUE wire could be broken. This will keep the passenger window from working from EITHER switch.

Please also review this article:

What Else Could Be Wrong?

Jul 18, 2011 | 1999 Pontiac Firebird

1 Answer

2000 chevrolet silverado extended cab drivers side window will not go up or down. passanger window works on same switch-changed switch-no difference-applies power to motor-window -window operates. any...

If the motor works when you apply power and ground directly to it the problem has to lie in the wiring or switch. I know you replaced the switch already but i would start with verifying that the switch is providing power and ground to the appropriate wires to the drivers window motor. You can check it at the motor first, if you don't have power there, check it at the switch. If you have power and ground at the switch but not at the window motor look for a broken wire. If you have power and ground at the window motor connector, yet the motor still doesn't work, do a voltage drop test to determine if there is excessive resistance in a connection or wire somewhere in the circuit.

Aug 06, 2010 | 2000 Chevrolet Silverado

1 Answer

Trouble shooting power windows- all 4 windows stop working at the same time. please help

you need to locate the power window fuse from using the owners manual,and test the fuse on both sides with a test light and key on,if no power replace fuse,if you have power on both sides of fuse,go to each door and try each switch,if they work you will need a master switch in the drivers door

Dec 09, 2009 | 2004 Buick Century

2 Answers

My 2000 dodge dakota has power windows the up and down button for the passenger side window will not work on the driver side and the up button wont work on the driver side. and my window is stuck down!! i...

1. check fuses
2. if motors are good, more likely it is, it will be the windows regulator or windows switch, both tend to wear out the contacts over times. the windows switch pretty expensive, its run about 123.00 buck each and the regulator run 59.00 each. more likely will be regulator. if it not the windows switch is good. hope that help some, both not hard to replace and not easy.

Jul 21, 2009 | 2001 Dodge Dakota

1 Answer



To resolve the issue you are facing with you need to check the following parts—

1. Battery voltage at window switch. If no battery voltage at that switch, check for broken wire between door and body it means the motor of the window has gone bad.

2. If window can be operated by driver switch or individual switch it means window switch has gone bad.

3. If the pin connectors are broken then it means the switch connector of the window has become unserviceable and need replacement. If none of the non-driver switch is working then it is a bad lockout switch.

Please check all the above possibilities and repair/replace whatever is gone bad.

Thanks for using FixYa

Please revert for further assistance.


Jul 20, 2009 | 2001 Jeep Cherokee

2 Answers

Windo motors wont work

The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.

Jul 17, 2009 | 1994 Oldsmobile Silhouette

1 Answer

Power window failure on drivers side

Sometrimes the wires between the door and the body break from opening and closing the door, check your window motor for paower with a test light, if no power, you have a broken wire, between the door and body

Dec 22, 2008 | 1999 Saturn SL

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides