Question about Oldsmobile LSS

Open Question

How to replace fuel pump in a 98 olds lss - LSS Oldsmobile Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Electric Fuel Pump on an '98 Sierra

when mine went bad I pulled the bed off and moved it back enough toget to the top of the fuel tank it was easier to remove and replace versus dropping the tank tookme and my buddy about 2 hours rig a sling and use a cherry picker to lift bed don't forget to unplug wire harness hope this helps

Posted on Jul 25, 2008

Ad
  • 1149 Answers

SOURCE: Fuel pump 98 s10

Hi:
You must first drain and lower the fuel tank, as your pump is mounted inside. With the fuel tank supported, undo the tank mounting straps, and the filler hose, then slowly lower it until you can disconnect the fuel lines and electrical harness. The pump assembly is now accessable. Remove and replace the assembly , then reinstall the tank .

Posted on Dec 21, 2009

Testimonial: "Good fast Help- Thanks but was hoping didnt need to drop tank."

  • 3640 Answers

SOURCE: belt routing on my Olds 98 LSS. It looks like I

on the v6- 3.1 yes you do. here is how to change it yourself, first of all, release tension on the belt tensioner. remove belt from pulleys, place a floor jack under engine on motor mount side to take off. put a piece of wood on jack to protect engine. jackup to engine with very slight pressure to hold it while removing mount. take off mount, remove old belt, put new belt on. the tensioner can be moved with a 3/8 drive in tensioner hole. after belt is on replace mount. then lower jack down. thats it!!

Posted on Feb 15, 2010

ZJLimited
  • 17970 Answers

SOURCE: replacing a fuel filter on 1 96 olds lsss

1996 Oldsmobile 88 LSS 3.8L SFI OHV 6cyl the Fuel Filter is located under vehicle, passenger side, below seating area, front of fuel tank, mounted on frame in fuel line.

JUst unplug the filter at the line.

Good luck

Posted on Apr 01, 2010

  • 2926 Answers

SOURCE: I have an 89 Olds 98 Regency. The fuel pump comes

The fuel pump will come on then, shut off when the key is placed in the ON position, this is normal. What is not normal, is when the key is turned to start the engine, and the fuel pump does not run when the engine is running at the same time. The initial power up you hear is a prime function that all vehicles have.

Posted on Jan 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

96 olds lss had fuel pump replaced wont stay started long sputter spits ect.


You better find a different mechanic . Before calling a bad fuel pump ,did he do fuel pressure test ? Did he test the electrical circuit ? Did he check mass air flow sensor ,injectors , fuel regulator , engine senors ? How many miles on the vehicle , is the engine in good shape ? Timing chain ?

Aug 05, 2016 | Cars & Trucks

1 Answer

Failing check valve in fuel pump should a inline be put in instead of new fuel pump


If the fuel pump check valve is failing on a vehicle that old, you should likely replace the fuel pump, filter, and pressure regulator just as a matter of maintenance. Don't waste time with band-aid fixes.

Sep 05, 2014 | Cars & Trucks

1 Answer

97' olsdmobile lss shuts off while driving. not when accelerating. runs kinda ruff.


Really

The 20 lbs wasn't a clue

You need 60#

Replace the fuel pump

Dec 10, 2012 | 1997 Oldsmobile LSS

1 Answer

Garage says the entire fuel tank assembly needs to be replaced on my 96 olds lss. Quote is 1100.00 is this reasonable?


Really? That would put soo much hurt on my pocketbook that my health would be affected. Just like a health issue, I think I'd want a second opinion.
Of course, I couldn't argue with the price of parts and everything else now. Insurance appraiser said the damages to my neighbor's one or two year old car totaled over $9,000, from hitting a horse. When I look at it, I have trouble believing it is that much.
Anyway that sounds pretty high. Is there a lot of electronic gizmo there besides a pump and a sensor or two?

Nov 08, 2011 | 1996 Oldsmobile LSS

1 Answer

My 1996 olds lss is missing really bad on acceleration could this be the fuel pump i have changed the fuel filter and the check engine light is on


If the check engine light is on you can have a diagnostic ran on your car, and find out exactly what is wrong with it. That will take the guess work out of repairing it. You can have this done at any auto parts store for free.

Apr 17, 2011 | 1996 Oldsmobile LSS

1 Answer

Why does my 98 oldsmobile lss transmission shift hard when the car is warm but shift fine when car is cold


The pressure solenoid needs to be replaced under the side cover of the transmission.

Dec 01, 2010 | 1998 Oldsmobile LSS

1 Answer

Replacing a fuel filter on 1 96 olds lsss


1996 Oldsmobile 88 LSS 3.8L SFI OHV 6cyl the Fuel Filter is located under vehicle, passenger side, below seating area, front of fuel tank, mounted on frame in fuel line.

JUst unplug the filter at the line.

Good luck

Apr 01, 2010 | 1996 Oldsmobile LSS

1 Answer

Belt routing on my Olds 98 LSS. It looks like I


on the v6- 3.1 yes you do. here is how to change it yourself, first of all, release tension on the belt tensioner. remove belt from pulleys, place a floor jack under engine on motor mount side to take off. put a piece of wood on jack to protect engine. jackup to engine with very slight pressure to hold it while removing mount. take off mount, remove old belt, put new belt on. the tensioner can be moved with a 3/8 drive in tensioner hole. after belt is on replace mount. then lower jack down. thats it!!

Feb 15, 2010 | 1998 Oldsmobile LSS

1 Answer

The car turns over and shuts off


Replace crank sensor. check to see what is running while car is off. Door switch,dome lights, power ant. etc.

Jul 15, 2009 | 1997 Oldsmobile LSS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...