Question about 1998 Mazda Protege

Open Question

What is the oil capacity of a '98 mazda protege 4cyl 1.5L? When do I check the oil--when engine is cool?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 726 Answers

SOURCE: replace an oil pan and casket

ok its a front wheel drive so it will have to be put on a hoist or on 4 car jack stands to get it level
then underneith the engine there is the pan there will be a bolt if there is no bolt there will be at least 12 nuts undo all them and put on the ground slowly untill all the oil is out then drain
then remove old gasket with a scraper untill none is visable
no gasket glue is required
put all back to geather tightin bolts but not to the max fill with oil then run car till its hot then let it cool and retightin bolts again

Posted on Jul 02, 2008

Ad
  • 5 Answers

SOURCE: 2001 Mazda Protege cooling fan or thermostat

the sensor or the fan relay is bad

Posted on Oct 18, 2008

AaronTech
  • 115 Answers

SOURCE: Locating oil filter on 2000 Mazda Protege

on the backside of the motor, towards the firewall. look above the drive shaft. it's about haft way up the motor.

Posted on Jun 24, 2009

  • 5 Answers

SOURCE: Mazda Protege ES 2001,speedometer and odometer

Vehicle speed sensor. See if you can buy one of those cheap OBD2 scan tools Wal-mart sells, and if you have a P0500 in the PCM, I would place my money on a broken sensor. It costs about $60

Posted on Jul 23, 2009

  • 1 Answer

SOURCE: 2001 mazda protege keeps stalling

my 2001 mazda protege starts hard, idles low and high at various times (never normal) and it acts as though its going to stall at all times. sparks and wires are changed no help, changed air filter no help. any idea on what to do?

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda protege timing belt diagram 1.5


Check THIS LINK for zooming diagram...

10_11_2011_3_09_38_pm.gif


Fig. 3: Exploded view of the timing cover assembly for the 1.5L and 1995 1.6L engines-1995-98 1.8L engine is similar

Hope this helps (remember to rating this answer and leave some testimonial comment).

Oct 09, 2011 | 1997 Mazda Protege

1 Answer

What is the purpose of the water sending unit located at the thermostat?


For 1994 Mazda Protege 1.8L MFI SOHC 4cyl the Coolant Temperature Sensor is located under hood, driver side, upper engine area, end of cylinder head, mounted in top of water outlet, work for activated the electrci cooling fan whan is necessary.

Feb 07, 2011 | 1994 Mazda Protege

2 Answers

I need to know how to change a oil pan gasket in a 2000 mazda protege


Mazda Protege Oil Pan

m_mzp05a.jpgThe Mazda Protege Cheap Oil Pan that we sell could be mounted easily at the bottom of the crankcase of the vehicle. For fast and helpful information on a Mazda Protege OEM Oil Pan give us a call toll-free! We guarantee a secured server, so you can rest assure your information is kept safe when you place a Mazda Protege Oil Pan order! You can rest assure that you will always be treated with the best care and service with your Mazda Protege Replacement Oil Pan purchase! Excessive tightening of Mazda Protege Oil Pans can cause the gasket to get smashed, so put an extra care during installation. Ordering Mazda Protege Drain Oil Pan online is fast and simple, however, giving us a call toll free can have greater benefits because we can provide expert advice and suggest additional parts that may be needed that you are not aware of! We have proficient sales specialists who are ready to answer your queries regarding Mazda Protege Aftermarket Oil Pan. Did you know that our online catalog is available at all hours to take and process your Mazda Protege New Oil Pan order? That's right! The Mazda Protege Discount Oil Pan is considered as one of the major components of the cooling system.order it to .......racepages.com/parts/oil_pan/mazda/protege.html


Nov 09, 2010 | 2000 Mazda Protege

1 Answer

2000 Mazda Protege SE Oil Leak . Have not had a oil change recently. I parked the car at office. After an hour I saw lots of oil appearing centre of engine


Check for broken gaskets on the bottom and the top of the engine. Make sure your oil filter is not broken, make sure the drain plug is in and secure, also make sure your oil pump is working correctly and not leaking oil. Its all about looking for the leak, just inspect the engine REALLY well.

May 17, 2010 | 2000 Mazda Protege

1 Answer

For 2003 Mazda Protege ES model 2.0L 4cyl engine; engine running rough and ''shaking at idle'' when stopped on road for traffic light for example. Also becomming hard to start. Someone mentioned a ''cold...


Check the air inlet boot going from the air filter to the intake for rips or holes. If rips exist, this would allow air to bypass the filter and mass air flow sensor and will lead to a check engine light appearing. The code would read "too lean, bank 1." If this problem is allowed to continue for long periods of time, the EGR ports will have to be cleaned out and maybe even the intake.

Mar 05, 2010 | 2003 Mazda Protege

3 Answers

Locating oil filter on 2000 Mazda Protege


on the backside of the motor, towards the firewall. look above the drive shaft. it's about haft way up the motor.

Jun 24, 2009 | 2000 Mazda Protege

2 Answers

Oil leak in my 98 mazda protege


Could be a rear main seal.

Apr 02, 2009 | 1998 Mazda Protege

1 Answer

1995 mazda protege having problems running during aceleration


change the transmission fluid, replace the oil and oil filter check spark plug cables, check starter coilpak, and make sure there is coolant

Jul 02, 2008 | 1995 Mazda Protege

Not finding what you are looking for?
1998 Mazda Protege Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...