Question about 2003 BMW 325

1 Answer

I have bmw 325i coupe , 2007, and the run flat symbol is on, i adjusted the tyre pressure according to the bmw recommended pressure , but it is still on. i dont know if something else is wrong with the tyres.plz help me.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Turn the ignition on and attach your seat belt. Use the thumb wheel to scroll thru to the tire indicator. Press and hold the button at the end of the stalk(turn signal) for appx. 2 seconds and then release and then press and hold again. It will either have a box that comes up empty that will have a checkmark when the system is initialized or it will say "resetting". At the BMW national website for whatever country you are in you can go there and look at the complete manual and it will state for sure what your vehicle takes to reset.

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset run flat warning on bmw x1 2011 model sdrive


Follow these simple steps to reset the BMW TPMS without the iDrive system:
  1. Check all tyre pressures are set to the manufacturer's recommended settings.
  2. Use the indicator stalk to scroll down until you see the tyre symbol and 'RESET'
  3. Press the BC button on the end of the indicator stalk.
  4. The display with show 'RESETTING'

Aug 29, 2016 | 2011 BMW X1 sDrive18d

1 Answer

Recommended tyre pressure


The required tyre pressure is established by the amount of load or weight that the tyre is carrying. Over or under inflation can cause excessive tire tread wear. The recommended pressures for your tyres are shown in raised lettering on the sidewall of the tyres.
Depending on what you are towing, you will know how much additional weight is being placed on the cars rear tyres, and you can adjust the pressure accordingly.
Personally, When I am towing, I increase the tire pressures by about 5 psi just to reduce sidewall flexing and create a more stable towing package.
Hope this helps.

Apr 03, 2014 | 2005 Chrysler Voyager

1 Answer

I HAVE A 2007 BMW Z4 and this exclamation mark with a horseshoe looking thing around it popped up does anyone know what this means


Its your tyre pressure monitor, do you have a flat tyre
Check your air pressure
Also it must be quicker to check your owners manual over this process.
Should be one in the glove box....

Apr 06, 2013 | 2003 BMW Z4

2 Answers

Tyre Pressure light has appeared on dashboard of 2007 BMW 118d sport.However according to the manual I need to reset INT option on the board computer, however no option of INT on indicator stalk? Can you...


it is done by selecting af the indicator stick, and choose reset, then drive for 50 meters/yards then the computet knows the turns af all the wheels and can find out if you get a flat ot poorly inflat4ed tyre.

no need for bmw service, it is also in your manual for the car. (i got one also)

Jun 29, 2011 | 2005 BMW 1 Series

1 Answer

2004 bmw 330 tyre light comes on


Check all your tyre pressures,if they are all correct press the tyre pressure reset button if you are unsure which button to press consult your handbook.if problems still persist you should get a diagnostic check.

Mar 21, 2010 | 2003 BMW 330

1 Answer

I have just changed my tyres on my 2007 BMW 320d and I do not know how to cancel the run flat tyre warning now showing on the dash board. My car is spanish without 'I' control which is the only method...


Hi make sure your tyre pressure is correct then switch Ignition ON, scroll the the switch you mentioned untill the symbol of Tyre pressure monitor displayed at intrument cluster. press and release then Press again and hold for atlest 5 sec. the side button of switch untll the box beside the Tyre pressure monitor got tick sign. Ignition off and verify the system operation.

Jan 14, 2010 | BMW 318 Cars & Trucks

1 Answer

What i believe is the run-flat symbol has come on... but how do i know it is in fact a puncture? The tyres appear to be fine and not even low on air.


They are uneven in pressure, check and adjust pressures as per manufacturer and reset tyre indicator as per your vehicle hand book. Cannot explain it here as there are different resets depending on model of BMW.

Dec 16, 2009 | 2006 BMW Z4 Roadster

1 Answer

Install serpentine belt on 2003 BMW 325i


There are a couple of ways. Either from the top or bottom of the car. Depends on what tools you have.

Jul 12, 2009 | 2007 BMW 335i Coupe

2 Answers

Bonnet open/top up symbol.and how to calibrate tyre pressure cont


alanracrider: on your hood light (alternate term we use here in the states), there are switches located in the engine compartment which the hood come in contact with when it is closed.I do not have any data on your particular car, but if it is like most Nissan products, the switch or switches should be visible. If they are out of adjustment and do not get depressed far enough, they will not break the ground circuit which makes the light stay on.
The tire pressure issue should be the same as it is on any other Nissan produce. I doubt seriously that Nissan developed something just for the GTR which would improve over the present design.
The procedure is as follows: The pressures Must be adjusted "COLD" to the recommended specifications as written on the label in the door opening. Then the car must be driven at speeds above 26kph to activate the tire pressure monitoring system. "USE A TIRE PRESSURE GAGE WHEN CHECKING AND ADJUSTING THE PRESSURES!" According to Nissan, the light should cancel.
I hope this information is correct for your car, as it would address a Nissan "Z" car. Good luck

Apr 02, 2009 | 2009 Nissan GT-R

Not finding what you are looking for?
2003 BMW 325 Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...