Question about 1995 Isuzu Rodeo

1 Answer

Eerything works wont start think the firing order is wrong on the plug wires how do i correct it???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

Why are they wrong???? you been taking them off or what???
the firing order is 1-3-4-2,,,,,next time you change the plugs only change one plug at a time,,,that or mark your leads with 1-2-3-4
the No 1 plug is the front cylinder by the water pump,,,

Posted on Aug 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just changed the spark plugs in my 2004 Ford BA Falcon and now it wont start!


Sounds like you have crossed the spark plug wires...(wrong firing order:) Check with the store where you purchased the new plugs...they should be able to provide the correct firing order...also you must locate cylinder #1 to begin...and confirm the pattern of the firing order...sounds harder than it is...Hope this helps.

Jul 30, 2014 | Cars & Trucks

1 Answer

Changed the plugs wires and cap and rotor...think I might have screwed the firing order up....no misfire just wont turn over.


the wires to the plugs should not keep the motor from cranking over. If the battery is fully charged the ignition switch should engage the starter. If you think the firing order is wrong you need to determine 1 where is top dead center (the position the motor is in when #1 cylinder is at the top of the compression stroke). 2 what direction does the rotor turn 3 what is the firing order One way to make it easy to rotate the motor is to remove the spark plugs. no compression means no resistance to the starter so the motor should turn over with the key in the start position. If it won't crank over with the plugs out then something is wrong with the starter, battery, starter relay, or ignition switch. I always start with the basics. the battery should have at least 12.5 volts. if it does check the battery terminals. even if the starter is weak you should hear a click when the key is turned to the start position. Once you get the starter to turn over the motor you can tell when the number one cylinder is at top dead center by putting a finger over the spark hole as you crank over. You will feel the compression as the cylinder comes up on the compression stroke. I have used a large socket to slowly turn the motor over and when you are near top dead center you should be able to see the degrees of advance on the timing mark. Set the motor at top dead center then see where the rotor lines up with the wires on the distributor cap. that is where number one cylinder should fire. You then follow around in the direction that the rotor turns and the wires will corispond with the firing order. I always make a mark on the number one spot on the cap with a felt pen. That way you have a fixed reference point. Take care to verify that all the wires are to the proper plugs before trying to start. Take extra care at this point and make sure your firing order and rotor rotation are correct. I would triple check this. The firing order and rotor direction are usually somewhere on the autozone repair web site

Apr 19, 2011 | Jeep Cherokee Cars & Trucks

3 Answers

My husband did a tune up on my car yesterday and now it wont start it will turn over like it wants to start but it wont he said that its miss firing we have bought 3 new coil packs and still will not start...


If your car is miss firing and your husband changed the coil packs,the wires leading from coil packs to sparkplugs must have got crossed.This will change car timing which will result in the car miss firing.He needs to go over wiring and correct problem for car to run right.You can go online to autozone.com and type in Info about car to get the correct wiring layout.Your problem isnt the new plugs n wires.Its the wiring layout.

Feb 09, 2011 | Pontiac Grand Am Cars & Trucks

2 Answers

Just changed out my spark plugs, wires, distributor cap and rotor. Now the car wont start, what is the problem ?


Recheck the firing order of the spark plugs and wires. you might have connected them wrong. Can't tell you the firing order since I don't know what kind, make, or year of your vehicle.

Mar 15, 2010 | 1997 Honda Civic

3 Answers

I changed the plugs on the car, it ran rough now it wont start, it backfires through the carb


i bet you have put the plug leads on the wrong plugs?? have a close look at your fireing order to see if im right,,,

Oct 31, 2009 | 1996 Chevrolet Cavalier

3 Answers

Changed spark plugs and wires now car wont start


Make sure wires are in correct order for firing. Also make sure they snap down when placed on.

To view free online repair manual go to this link:

http://www.autozone.com/N,313267/initialAction,repairGuide/shopping/vehicleSelect4.htm

Jan 30, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

I think fire order is wrong


no 1-3-5 should be the rear of engine , see pic .
71d6876.jpg
think you got it backwards , thats all .

J5

Jan 22, 2009 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1995 Isuzu Rodeo Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...