Question about 1995 Mercury Grand Marquis

1 Answer

I have forgotten the code for the drivers key pad on door how do I change it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

It would have to be done at the dealer, but some time's with this year car, they will put a sticker on the trunk lid with the code, if not dealer only, hope this was very helpful.

Posted on Aug 28, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to change code on door key pad

  • Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.
  • Press the "1-2" button on the keypad immediately after inputting the factory code.
  • Enter the five-digit key code you wish to store for your keyless entry system within five seconds of pressing the "1-2" button.

  • Read more :

    Jul 05, 2015 | 2008 Mercury Mariner

    2 Answers

    My keypad stopped working. Is there a battery for this?

    if your keypad is factory installed there is no battery . if after market yes has battery. if factory, be sure no keys are in car, when you press in a code number does the pad light up ,if yes its getting power then it is probably the keypad needs to be replaced ,if not lighting up its not getting power, check fuses and wiring connections

    Dec 23, 2014 | 2005 Ford Escape Limited

    1 Answer

    Ive lost my key to my 2000 ford taurus my door has a num pad on it how do i reset it

    Have to see the dealer & also have an owners manual
    to change the codes to what you want on the door

    Ignition keys you lost?

    You should have at least three keys programmed to
    the ignition key detector system (First)

    Aug 01, 2014 | 2000 Ford Taurus

    1 Answer


    You will need to remove the driver's door panel to access the connector going to the pad. Using a PCM safe test light, probe the wires going to the pad to see if you have power to it. If yes, the touch pad is most likely bad. They are held in place by a thin metal slide retainer inside the door body.

    Feb 17, 2013 | Ford F-150 Cars & Trucks

    1 Answer

    How do you re-program the security code on a 2007

    • Enter permanent factory code
    • Press the 1/2 button within 5 seconds to enter programming mode
    • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
    • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
    • Press any button on new remote, doors will lock, unlock to verify
    • Do the previous step with the second remote, doors will lock unlock to verify.
    • Turn ignition off. Doors will again lock, unlock to verify.
    NOTE-Some vehicles use 5 turns of the key instead of 8

    Jun 05, 2010 | 2007 Ford Explorer Eddie Bauer

    1 Answer

    Key pad door locks

    Locksmith with the NGS Scanner! GoodLKuck!

    Oct 05, 2009 | 2001 Ford Explorer Sport

    2 Answers

    The pad is long with five buttons, two numbers on each button. 1-0

    No idea what your question is, but if you are asking what the pad on the door is, it is a code pad to unlock the doors, open the trunk etc. I don't know if they still do it, but Lincoln use to put the base code on the trunk. Look around for a tag stuck to the trunk arm, or trunk lid. When you enter the code it unlocks the doors and if you push other #'s after the code it will open the trunk, turn on lights etc.

    Hope this helps.

    Aug 28, 2009 | 2004 Lincoln LS

    1 Answer

    Combination on car keypad does not open doors

    Does the key pad on the door light up? Are there any tears in the key pad numbers? Does the key pad lock the doors?.
    There are no fuses directly for the pad.. The key pad is linked directly to the RAP. module. If the locks work from the FOB the fuses for the Module are good. Chances are the pad is no good especially if it don't light up. The RAP module is above the driver side foot well, directly above the accelerator pedal . Hope this helps.

    Mar 09, 2009 | 1999 Ford Taurus

    1 Answer

    How to reprogram key pad on door on 97 explorer

    enter original code then press #1 enter new code and press #1 again

    Dec 14, 2008 | 1997 Ford Explorer AWD

    2 Answers

    Using numbered key pad on drivers door

    the code can not be will need a scanner to retrive the keyless code.sorry.

    Oct 26, 2008 | 1995 Ford Taurus

    Not finding what you are looking for?
    1995 Mercury Grand Marquis Logo

    93 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts


    Level 3 Expert

    75807 Answers


    Level 3 Expert

    5495 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides