Question about 1999 Chevrolet Silverado 1500

1 Answer

How do you access and replace directional signal bulb

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

Hello my name is Ben. You must first remove the headlight assembly since the directional signal is underneath it. Raise the hood and you will see two gray colored rods on top of the headlight assembly. Release those rods by rotating them forward and pull them straight up. Now you can remove and unplug the headlight assembly to remove it. You will now have access to the directional signal bulb. I hope this helps with your repair, Ben.

Posted on Aug 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a front marker light bulb on a 2013 Altima


Nissan Altima Direct Fit LED Daytime Running Lights Installation just do step #1 than you will have access to the light bulb. Twist and pull out the turn signal lamp bulb. then replace.

Dec 13, 2016 | Cars & Trucks

1 Answer

Marker lights wont go on


on 1998 and earlier models, the side marker light housing is located next to the headlight housing. Remove the screws and pull out the housing to access the bulbholder on the back of the housing. On 1999 and later models, the park and turn signal bulbs are located in the bottom of headlight housing. Twist the bulbholders out to replace the park or turn signal bulbs. Installation is the reverse of the removal directions.

Apr 04, 2013 | 1995 Jeep Grand Cherokee

1 Answer

How to change turn sign light


Instructions
1Start your vehicle's engine. Turn the steering wheel the opposite direction of the bulb you need to change. If you need to change the left turn signal light bulb then you will turn the wheel as far as you can to the right. This moves the wheel out of the way so that you have access to the fender and the turn signal assembly.


2Get down by the front fender of your vehicle. Use a Philips screwdriver to remove the screws from the wheel well cover. Take off the wheel well cover and set it off to the side.




3Stick your hand into the wheel well and find the turn signal bulb. Turn it to the left and unscrew it from the turn signal assembly. Remove the bulb.


4Take your new turn signal light bulb and screw it into place using your hand. Replace the wheel well cover and use the Philips screwdriver to secure it in place. Repeat this process for the turn signal on the other side of the vehicle.

Read more: Chinasinoy

Aug 03, 2012 | 2010 Kia Optima

1 Answer

How do I replace a rear turn signal bulb?


Some bulbs can be changed without removing the tail light. First check to see if there is an access panel in the trunk trim near the tail light. If there is, you can twist the turn signal socket counter-clockwise to remove it from the unit. If there is no access panel you will have to remove the portion of trim blocking the tail light. This is usually held in by a few small clips. After it is removed you can follow the directions above.
Lastly, some models have to have the tail light removed to change a bulb. The bolts will either be behind the trunk trim or on the inside edge of the tail light.
Once the bulb is changed just reverse the steps to put it back together.
Good Luck!!

Mar 04, 2011 | 2000 Buick LeSabre

1 Answer

Replace rt. front turn signal bulb


look at the other side,under the bumper you just twist and turn and you will have access to change your bulb.

Aug 09, 2009 | 1999 Chevrolet Cavalier

1 Answer

Replacing rear turn signal bulb in 2003 Mustang


remove the trim panel at the very rear of trunk, remove it and place it out of the way, remove tail light Assembly retaining nuts top and bottom, I think there are 6 per side, pull the tail light assembly straight back to access the bulbs for replacement.

Dec 04, 2008 | 2003 Ford Mustang

1 Answer

How to replace headlight on a 2003 Chevy Tracker


There are two black plastic clips behind the the air filter, remove them and release the whole assembly to access the lights.

If you still get in troubles, have it replaced at a petrol station, they will help you in fitting the bulb, and it won't be expensive.


Here follows
2003 Chevrolet Tracker Light Bulb Size Chart
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 1157A
Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 921
Tail Light Bulb Size: 7443
Stop Light Bulb Size: 7443
High Mount Stop Light Bulb Size: 168 Or 921
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 921
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 74
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 168
Instrument-General Light Bulb Size: 158 or 74
Check Engine Indicator Light Bulb Size: 74
Hi-Beam Indicator Light Bulb Size: 74
Seat Belt Indicator Light Bulb Size: 74
Brake Warning Light Bulb Size: 74
Automatic Transmission Indicator Light Bulb Size: 74
Directional Signal Indicator Light Bulb Size: 74

Oct 02, 2008 | 2003 Chevrolet Tracker

1 Answer

Signal bulb replacement


you may be able to access the bulb housing under the hood. open the hood and look behind the turn signal for the bulb housing. once located, grasp the housing and turn counterclockwise about a quarter and then pull. be sure to replace wtih the same type/part number bulb.

Sep 25, 2008 | 1996 Mercury Grand Marquis

1 Answer

Replace front turn signal bulb


remove top screw and pull cover straight out to access bulb

Jul 27, 2008 | 1992 Toyota Land Cruiser

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...