Question about 1999 Chevrolet Silverado 1500

1 Answer

Need to remove insde door panel -drivers side. how is this done?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

Hello my name is Ben and I can help you with this. Look toward the front bottom and remove that screw, then there is one at the armrest. If power windows, carefully pry the switch assembly up and disconnect electrical connectors. If manual windows, there is a clip shaped like a " C " that holds the handle on a grooved shaft shaft. You can either buy a special tool to remove the clip or use a very thin screwdriver and pry it off from behind the crank handle. It helps to push the door panel in slightly to gain access to the back of the crank handle. CAUTION, the C clip has a tendency to fly off into outer space never to be seen again. Carefully pry out the trim piece around the door handle. Next remove that triangle shaped plastic piece at the top of the door trim, it just comes straight out, ( use a small screwdriver or putty knife to gently pry it out from the edge ) , once you are sure you have found all the screws, start at the bottom of the panel and pry it out, when the fasteners are out lift the panel up.If you meet STRONG resistance double check for any screws you missed. If you have any questions about this feel free to leave a comment and I will try to clarify my answer, Ben.

Posted on Aug 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What the easiest way to replace driver side door?


REMOVE EXISTING DOOR PANEL AND DISCONNECT WIRING AND EXIT THE HARNESS FROM THE DOOR. ONCE THAT IS DONE OUTLINE THE HINGE WITH A SHARPIE THAT IS ON THE MAIN BODY OF THE CAR. REMOVE THE DOOR HOLDER AND HINGE OR HINGES AND YOUR DONE

Apr 08, 2015 | Cars & Trucks

1 Answer

How do I remove the driver side door panel to replace window motor


1. Remove 2 small screws at bottom of the door panel (6mm)
2. Remove small black cover from inset for door handle (pry it out carefully with a small flat head screw driver or panel removal tool) and remove bolt behind it (8mm)
3. Pop window/door lock control panel out with the same flat head screw driver and disconnect all connectors. Remove small screw from behind it (6mm)
4. Lift straight up on door panel and then tilt toward you.
5. Disconnect mirror control connector.
6. Squeeze two tabs on the door latch assembly and it can be removed along with the cable. DONE.

Jul 02, 2010 | 1999 Ford F150 Regular Cab

1 Answer

Driver side door panel removal


Generic instructions to remove door panels:

1. Remove the screw(s) in the trim behind the door release handle and remove the trim.
2. Look for the screws in the arm rest and remove. Remove the arm rest.
3. Look for other screws (possibly under caps) and remove them.
4. Insert a wide flat blade between the door panel and the door. Find the plastic tabs which hold the panel to the door and gently pry the panel away from the door. Make sure you work as close to these plastic tabs as possible to avoid ripping the panel.
5. Work your way around the door prying the tabs out of the door.
6. When everything is free, gently lift the door panel straight up and out of the door.
7. Disconnect the electrical wires, and you are done.
8. There is a vapor barrier between the door and panel which must be gently peeled out of the way in order for you to gain access to the window and door latch mechanisms.

Jan 20, 2010 | 2000 Chrysler Town & Country

1 Answer

Need to remove inside door panel on drivers side 1999 chevy silverado z-71 3 door new body style


just pop out the triangle piece from the top at the top front of the door panel with a flat head screwdriver. Then simply pop out the door lock cover from the aft side and the door handle cover from the aft side as well. Then pop up your cap containing the auto door locks and windows and disconnect the cannon plugs. Then just remove 2 screws (1 from under the door lock/window cap and one just insde the door handle itself. You'll then life up and towards you to remove the panel. Don't pull it too far out because you'll still need to disconnect the speaker cannon plug and pull out the door open light at the bottom aft of the panel. You can then set the door panel off to the side.

Jan 19, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

How i remove a door panel from 1994 passat


lose the handel bars by se and push to the rigt way. unsrew al srew on cover some are insde the door handel. the juice a flat dirver or som flat thing to remow the panel.then push it up and out it gows.

Dec 04, 2009 | 1994 Volkswagen Passat

2 Answers

2002 Cadillac Sedan DeVille door panel, how do you remove?


I need to repair power window track cable on my car on the driver's side~
2002 Cadillac Sedan DeVille

Jun 30, 2009 | 2004 Cadillac Deville

1 Answer

REAR DRIVER'S SIDE DOOR PANEL


plastic clip on back of handel , hard to remove without right tool , but can be done

Jun 01, 2009 | 2004 Pontiac Grand Prix

1 Answer

How to remove drivers door panel from 1997 Cadillac Deville.


try to look at stress point on door by handle normally two screws and under neath panel to screws also disconnect side panel for side mirror door of using panel popper

May 23, 2009 | 1997 Cadillac DeVille

2 Answers

Need to take the door panel off of drivers side doors


yes there are two or three screws in the handle itself, and there a couple of screwa the handle u pull to close the door.. the rest are just clips on the outer trim of the door, just simply pull the panel away from the door and it will pop off..keith..

Mar 14, 2009 | 1995 Buick LeSabre

1 Answer

How do I remove the driver side door panel to replace the window


you are talking about the black triangle piece at the top in the front of the door.opposit the side view mirror? I can't remember if it is held on with one screw or it is just clipped on.(I think it's just clipped) I think I have detailed pics. of this procedure at home. if you need them post back and i'll see if i can dig them out.

Jan 22, 2009 | 1999 Ford Windstar

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...