Question about 2001 Jeep Cherokee
I have a similar issue on my 03 liberty, but all the lights are off. there should be a panel around the shifter that you can just pop out and get you started
Posted on May 18, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: saturn shifter linkage
An easy fix would be to go tothe Junk Yard and pull off the parts you need .......in order to do this though I would advise getting a Haynes Manual (VERY VERY HELPFUL BOOK) for your car...Available at your local Auto parts Store (even if you dont do it yourself you should still get the book...it can save you a lot of time and money when it comes to knowing and working on your vehicle)
Posted on Jul 12, 2008
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
Posted on Nov 20, 2008
SOURCE: 2001 Jeep won't reverse
Depending upon what transmission you have, it could be a bad solenoid or control unit, bad reverse band or servo or a few other things. If you find no external problems, you will need a trans shop to examine it. If rpm drops when reverse is selected that means it's trying to go but has an internal problem.
Posted on Feb 24, 2009
Hello and welcome to FixYa . Locate the dial that controls the brightness of the dashboardlights. If the control is not immediately evident. Make sure the brightness control is turned on. If it is and the lights aren't working, the problem may be a bad fuse. Check the fuse that controls the dashboard lights Replace the fuse if necessary. If just one part of the instrument panel is not lighting up, then you have either a burned-out bulb or a wiring problem.
Passenger side kick panel fuse breakdown for a 1996 jeep Cherokee Country
01 - 25A Rear Wiper/Washer
02 - 15A Radio, Cigar Lighter
03 - Empty
04 - 15A Passing Light
05 - 30A Blower Motor
06 - 30A (Circuit Breaker) Power Windows
07 - 02A ABS
08 - 20A Turn Signal Flasher
09 - 10A Radio/Clock Memory, Courtesy Lights, Glove Box, Cargo, Dome Lights, Telltales
10 - Empty
11 - 25A Headlamp Delay Module, Horn
12 - Empty
13 - 20A Power Door Locks
14 - Empty
15 - 15A Instrument Panel Lamps, Clock/Radio and Memory, Headlamp Switch, Parking Lamps
16 - 30A (Circuit Breaker) Power Seats, Trailer Tow
17 - 7.5A Instrument Cluster Gauges, Headlamp Delay Module, Chime Module, Overhead Console
18 - 25A Rear Defrost
19 - 05A Instrument Panel Lamps, Radio Illumination
20 - 5.5A (Circuit Breaker) Windshield Wipers and Washers
This should get you going. And you can always Ask Me.
Posted on Apr 27, 2009
You need to remove all the skrews from the door. Normaly there is one in the handle of the door, one behind the in door lach handel and one under the bump out for the arm rest on the door. Than you need to take a flat head skrew driver slowly priying the panel off. There are plastic clips on the backside of the panel it is ok if you brake a few.
Posted on May 01, 2009
Tips for a great answer:
Aug 23, 2011 | 2001 Jeep Cherokee
Mar 15, 2010 | 1998 Jeep Cherokee 4WD
Feb 15, 2010 | 2001 Jeep Grand Cherokee
Oct 28, 2009 | 1998 Jeep Cherokee
Jun 29, 2009 | 1998 Jeep Grand Cherokee
Nov 20, 2008 | 1999 Honda Accord
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: