Question about 2005 Toyota Camry Solara
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 11, 2014 | 2003 Pontiac Montana
May 23, 2013 | 2006 Opel Meriva 1.7
Feb 09, 2013 | 1999 Cadillac DeVille
Mar 08, 2011 | 1999 Buick Century
Turn your wipers off, using the stalk on the left side of your steering column. Turn your ignition off and remove the key.
Pull the wiper blade up to lift it to the service position. Pull the front part of the blade down to position it at an angle.
Pull back the lock pin on the center part of the wiper blade (where it connects to the wiper arm). This unlocks the blade from the wiper arm.
Grasp the blade on each side and pull it down (away from the extended wiper arm) to release it from the "U" clip.
Repeat the process for the other wiper blade, if desired. Removing the driver's side and passenger's side wiper blade is the same.
Install the new wiper blade. Open the lock pin on the new blade, and then insert it into the wiper arm "U" clip. Close the lock pin and lower the wiper blade to its normal position.
Jan 29, 2011 | Ford Explorer Cars & Trucks
Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups
When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.
Hope this helps to solve it.
Nov 26, 2010 | 1992 Dodge Ram 250
Mar 30, 2009 | 1995 Geo Prizm
Feb 18, 2009 | 2005 Chevrolet Equinox
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: