Question about 2006 Hummer H3

Open Question

My universal home remote on my hummer visor doesn't work is there a fuse that my be out? if so which one?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 h2 hummer getting messages to service 4 wheel drive now at about 25-30 mph getting a vibration


First check the drive shafts(vibration). Universal joints could be bad. Best to have it off the ground. No pressure from the tires and transfer case/transmission. Service 4x4 has to go on a scanner to get codes. Check fuses first.

Dec 15, 2016 | 2005 Hummer H2

1 Answer

Power windows, radio, visor lights, reading lamps stopped working in a 2005 ford explorer


maybe u are rigth, a fuse was realy blow up, or the wires in the visor are in shortcut .

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

Radio display doesn't work


check the fuse if you short out your cig lighter it will cause your radio to loose total power

Sep 25, 2012 | 2007 Hummer H3

1 Answer

When i turn on the contol knob for the air conditioner it will not blow, i have a 2006 hummer h3.


It sounds like your fan is not getting power or the motor is shot.

You can check the fuse panel to see if there is a blown fuse. Your manual should be able to tell you where the fuse panel is and which fuse controls the AC fan.

If that doesn't work either the fan motor is fried and needs to be replaced or there is a wire between the control panel and the fan that is severed/shorted. If you can find the blower fan and you have a multimeter you can test the motor to see if its good. Let me know if you need any more help.

Jun 07, 2011 | 2006 Hummer H3

1 Answer

How to program the garage door opener


Hold down the 2 outer buttons until the red light flashes (20-30 seconds) and release.
Select one of the 3 buttons you want to program and press that button.
Hold the handheld transmitter 1-2 inches from the visor transmitter.
Using 2 hands, press and hold the button on the handheld remote and the visor remote at the same time.
Continue to hold both buttons until the red light on the universal transmitter flashes first slowly then rapidly.
Release both buttons when the rapid flashing begins.
The transmitter is now programmed.
Note that if the remote doesn't open the garage door, your opener may have a "rolling code" or "code protected " feature.
If your opener has a rolling code feature then you will have to train the opener to accept the visor transmitter. See the owners manual for the opener.
I hope this helps you out. I do not have this feature in my car, I took the instructions from a ford manual. The manual also gives a phone number to call if you have problems 1-800-355-3515 (Homelink). I don't know if this number is still good or not. It can't hurt to try it out. Good Luck!


Apr 10, 2010 | 1999 Ford Explorer

2 Answers

Remove sunvisor on a 03 hummer


place flat screwdriver in slot, press up firmly as you press the visor upwards. once the visor go in 1/4 in. turn visor 90 degress and pull down

Mar 25, 2009 | 2005 Hummer H2

1 Answer

My home link system built in the sun visor of my 1996 jeep grand cherokee


Hi, there is no green button, i just bought the same vehicle,and i programed my entrance gate to the home link and worked the first time,all i did was hold my remote right up to the home link and pressed the first button and the remote button the same time until the red light flashed rapidly,and it worked just fine, hope that works

Dec 26, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Hummer H3 Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...