Question about 2006 Mazda 5

2 Answers

P 0756 sol b proformance or stuck open. Would a trans flush/transfer help? Could there be water in the harness to the sol? Can the sol be replaced or is a sealed unit? The van is a 2008 mazda 5 with the 5 speed auto. It is the cvt trans.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

If the issues is related to transmission kindly check the transmission mount.

Posted on Jan 04, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 662 Answers

Unfortunately a fluid flush will not work.....i doubt that water would be problem, and replacement is more than likely required.......

Posted on Aug 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Please help me p0756 cod honda accod auto matic gear problem Shift solonoid switch stack off Tell me exactly problem


Hi,there could be a problem with the sift solinoid,if you look on u-tube there is a vidio there showing you how to test it,good luck hope this was some help.

Jul 31, 2016 | Honda Accord Cars & Trucks

1 Answer

What causes code 81 on 94 gmc serria replaced lock up sol shift sol an epc sol still reading code 81


Sounds like the wiring harness between the motor and trans is worn through and shorting out. Common GM high miler issue. The ground wire stretches and breaks, leaving the trans non-functional after awhile.

Jan 21, 2015 | GMC Cars & Trucks

3 Answers

Why was the transmission fluid milky in color on my 97 blazer


Water mixed into trans fluid or oil will cause a milky appearance. Either there is a bad seal on the trans and you drove thru flood waters or the heat transfer pipe for the trans that is inside of the radiator has failed. Don't drive!!! Have it towed to a trans shop and have them check it out or you may be replacing the entire trans.

Dec 08, 2014 | Cars & Trucks

1 Answer

I have to error code with my jeep grand Cherokee Laredo 1999 the code are 1491,1495,753,136


P1491 Rad Fan Control Relay Circuit An open or shorted condition detected in the radiator fan control relay control circuit. This includes PWM solid state relays.P1495 Leak Detection Pump Solenoid Circuit An open or shorted condition detected in the Leak Detection Pump (LDP) solenoid circuit.P0753 (M) Trans 3-4 Shift Sol/Trans Relay Circuits An open or shorted condition detected in the overdrive solenoid control circuit or Trans Relay Circuit in JTEC RE transmissions. Was MIL code 45. P0753 (M) Trans 3-4 Shift Sol/Trans Relay Circuits An open or shorted condition detected in the transmission 2-4 shift solenoid circuit (4-speed auto. trans. only).P0136 (M) 1/2 O2 Sensor Heater Circuit Malfunction Oxygen sensor heater element malfunction.

Aside from getting into an accident and having your wiring harness severely damaged, the other likely suspect is your PCM. These codes are not related to each other and indicate a much larger problem.

Nov 02, 2013 | 1999 Jeep Grand Cherokee

1 Answer

What does the code po753 refer to


Symptom:

P-0753 TRANS 3-4 SHIFT SOLENOID/TRANS RELAY CIRCUITS

When Monitored and Set Condition:

P-0753 TRANS 3-4 SHIFT SOLENOID/TRANS RELAY CIRCUITS

When Monitored: Continuously with the key on.

Set Condition: This code is set if the voltage detected on the 3-4 Shift Solenoid Control

Circuit at the PCM is different than the expected voltage.

POSSIBLE CAUSES

FUSED B(+) FEED TO THE TRANS CONTROL RELAY OPEN

3-4 SOLENOID WIRING HARNESS INTERMITTENT DEF

3-4 SOLENOID WIRING HARNESS OBSERVABLY DEF

SHIFT SOLENOID CONTROL CIRCUIT OPEN

SHIFT SOLENOID CONTROL CIRCUIT SHORT TO GROUND

SOLENOID AND HARNESS DEF (SOLENOID CONTROL CKT)

TRANSMISSION RELAY OUTPUT CIRCUIT OPEN

TRANSMISSION RELAY OUTPUT CIRCUIT SHORTED TO GND

PCM DEF (3-4 SOLENOID/TRANSMISSION)

PCM DEF (TRANS 3-4 SOL/TRANS RLY CKT)

POWERTRAIN CONTROL MODULE DEFECTIVE

POWERTRAIN CONTROL MODULE DEFECTIVE

POWERTRAIN CONTROL MODULE DEFECTIVE

SOLENOID AND HARNESS DEF (SOLENOID PACK CONN)

TEST COMPLETE
TRANSMISSION CONTROL RELAY DEFECTIVE

Feb 03, 2012 | 1999 Dodge Dakota

1 Answer

What does the code po748 refer to


Symptom:

P-0748 GOV PRESSURE SOL CONTROL/TRANS RELAY CIRCUITS

When Monitored and Set Condition:

P-0748 GOV PRESSURE SOL CONTROL/TRANS RELAY CIRCUITS

When Monitored: Continuously with the key on.

Set Condition: This code is set if the voltage detected on the Governor Pressure Solenoid

Control Circuit at the PCM is different than the expected voltage for 4.8 seconds.

POSSIBLE CAUSES

NO POSSIBLE CAUSES REMAINING

FUSED B(+) CIRCUIT OPEN

SOLENOID AND HARNESS ASSEMBLY DEFECTIVE

GOVERNOR PRESSURE SOLENOID DEFECTIVE

TRANSMISSION CONTROL RELAY DEFECTIVE

GOV PRESSURE SOLENOID CONTROL CKT SHORT TO GROUND

GOVERNOR PRESSURE SOLENOID CONTROL CIRCUIT OPEN

GOVERNOR PRESSURE SOLENOID WIRING HARNESS INTERMITTENT DEFECT

GOVERNOR PRESSURE SOLENOID WIRING HARNESS OBSERVABLE DEFECT

TRANSMISSION RELAY OUTPUT CIRCUIT OPEN

TRANSMISSION RELAY OUTPUT CIRCUIT SHORTED TO GROUND

PCM DEFECTIVE (GOV PRESSURE SOLENOID SHORT TO VOLTAGE)

PCM DEFECTIVE (RES IN RANGE)

PCM DEFECTIVE (GOVERNOR PRESSURE SOLENOID DEFECTIVE)

PCM DEFECTIVE (CONTROL CIRCUIT SHORTED)
PCM DEFECTIVE (SOLENOID & HARNESS ASSEMBLY DEFECTIVE)

Feb 03, 2012 | 1999 Dodge Dakota

1 Answer

I have a 1999 e 320 benz and need to know how to replace waterpump


if your car over 65000 km done or after last trans service is it have been done over 65000 km from last trans service as a first thing do the trans service with trans mission flush, trans mission flush is very important, it must get done by right place who have the right flushing machine for mercedes trans flushing, it's take 12 Ltr transmission oil + transmission oil filter+ oil pan gasket+ pilot bush, you must ask them to replace all those things this trans service is very important for Mercedes 5 speed automatic transmission, please get genuine Mercedes parts only don't use any aftermarket stuff for this particular transmission, and also need to check transmission control unit, the reason is if you do not trans mission service at right time pilot bush starting to oil leaking, that oil flow through wiring to transmission control unit and it's get wet by oil, if it's get wet by oil it's not functioning properly so can play transmission, other thing is if any thing dose not work for solve your problem you must get it to authorized Mercedes transmission technician to check it can be faulty oil pump or torque converter, I would like to note one more important thin regarding this matter, before do any thing please check transmission oil condition its could be mixed with water, if the oil like milky, it's water in oil, if it's like that you must replace the radiator and trans flush as I note above this is very important for your problem, is this information helped you?

Oct 27, 2010 | Mercedes-Benz E320 Cars & Trucks

1 Answer

2004 dodge sprinter trans stuck in low gear . i am trying to locate the trans module


Check under seat unplug control module see if it is wet with fluid . cost me $138.00 fee.
Engine light on than next day off may 2 day then on at same place drive kid to school.
issue with transmission fluid wicking up the harness into the control module and causing the module to malfunction. Usually, the harness from the transmission to the ETC module is replaced and the module is replaced provided the leak is repaired. In some cases this may be more than is actually needed but it usually fixes the concern. Transmission fluid does not actually damage the module and can be flushed away with board cleaning solvent or electrical contact cleaner as a first attempt. Always repair the leak before replacing a module.
http://www.benzworld.org/forums/w163-m-class/1465231-mercedes-repair-maintainance-transmission-etc-tips.html

Jan 12, 2010 | 2004 Dodge Sprinter

1 Answer

1999 hyundai tiburon code 0747 pres cntrl sol . A circuit stuck on what do i need to do to repair


replace the solenoid & flush the trans fluid & replace with fresh/new fluid.

Oct 03, 2009 | Hyundai Motor 1999 Tiburon

1 Answer

Water is in trasmission


Drain and flush and refill, check to see if radiator trans oil cooler is bad and tranfering water, usally won't while running cause trans fluid is at higher pressures, but at engine off it can transfer due to residual coolant pressure in radiator...

Sep 30, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2006 Mazda 5 Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...